Used Holz Her Sprint 1315 for sale (170)

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate settings Fully automatic edge magazine for coil and strip material Gluing station: Glue pellets + PUR application Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for coil and strip material up to 3 mm (6 mm) edge thickness Adjustable bevel from 0-10° on the trimming saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraper unit for bevels and radii Ijdeywh A Iopfx Apneib Flat scraper unit - finishing Machine is INSPECTED and in TOP CONDITION from a very well-maintained workshop Available from stock in Lieboch

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Iiodpfxswkf Twj Apnob Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Iedpfxjy Eygno Apnjib Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: good (used), Year of construction: 2003, functionality: fully functional, power: 5.5 kW (7.48 HP), Max. cutting length: 5300 mm Max. trimming height: 2100 mm Max. cutting depth: 70 mm Iedpfx Apsyucmhjnjib Digital display for horizontal and vertical cutting Saw unit: 5.5 kW Saw blade diameter: 300 mm Unit pneumatically tiltable Dimensions (LxHxD): 6620 x 2948 x 1480 mm

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 15511601/120, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 4,045 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 317 mm, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,200 mm, Equipment: CE marking, documentation/manual, HOLZ-HER Horizontal-Nesting-CNC Dynestic 7507, Baujahr 2018, Lieferung ab Standort Enthalten: Software Campus V7 CAD/CAM, 1 Floating License CAMPUS V7 „Better Nest“ für rechteckige Bauteile High-Speed-USB-Server Handbedieneinheit Bedienpult mit 21,5" 16:9 Flachbildschirm Bohrkopf 7884, 14 Spindeln 10/4 inkl. Nutfräse Guscugw Njy Nzubouob Fräseinheit 7830, 8 kW (S6/40) Werkzeugwechsler, 6 Positionen, Pick-Up-Ausführung Werkzeugwechsler 7872 mit 1 Werkzeugfach, in X- und Y-Richtung schwenkbar Winkelgetriebe 7868 Individuelle Hinteranschläge ECO Vac – intelligentes Vakuumsystem Vakuumpumpe 3 x 140 m³/h = 420 m³/h, luftgekühlt Sicherheitslichtschranke Zentralschmierung, manuell EasyLabel-Drucker 1 zusätzliche Bearbeitungsstation A, hinten mit Anschlag Wärmetauscher zur Steuerungsschrankskühlung, max. 32 °C DC-Notstromversorgung (USV) Personensicherheit durch vertikale Sicherheitslichtvorhänge an allen vier Seiten der Maschine, für optimalen Zugang zum Maschinentisch. Manuelle Schmierung – Schmierstellen für alle Linearführungen in X, Y und Z sowie für alle Kugelgewindespindeln in X, Y und Z. Zusätzlicher Vakuumanschluss für 10 Vakuumsauger inkl. Wechselschlauch Vakuumsauger Iodpsy Nzubjfx Apnjib

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: Iiodpfsy Ny Uyox Apneb X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Z-Achsen-Verfahrweg = 240 mm Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg Ijdpfxsb A E Uhs Apnoib

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Iijdpjyamcwsfx Apneb Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: used, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm CUTCONTROL 2 control system, 17" TFT touchscreen Powerful optimization software: CD CUTTING-SYSTEM Label printer 3 air-cushion tables 1800 x 600 mm Automatic angle pressing device, up to max. 1300 mm Automatic notch-cutting device Offcut management device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0–100 m/min, stepless Saw carriage return: 130 m/min Rip fence feed: 0–100 m/min (EU 0–25 m/min) Rip fence return feed: 100 m/min Rip fence clamps: 7 units Compressed air supply required: 6 bar Extraction connection on main machine: 1 x 120 mm Extraction connection on pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air flow velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Ijdpfx Apsytrviensib Ex site

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Iodpfx Apjx Enqbenjib Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine - Ijdpeu R Syijfx Apnoib

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Isdpfx Apjylpwuensib Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, Iedpfxjygn Ibo Apnsib incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Iiodpfewftb Sox Apnob

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Iisdeugmw Eopfx Apnob

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Iedpfxjwka N Ts Apneib Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Isdpfx Aow Nad Hepneib Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Iiedpfxow I Ug He Apnsb Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Ijdew Tfxwjpfx Apnjib Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V Isdpjxc Rmkofx Apnjib - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Iiodpfew I U Rfjx Apnob Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 tracer nozzle printing unit 1913 MOT Iedpfsh Uyg Esx Apnjib cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Ijdpfx Apjnxkm Eoneib Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: as good as new (ex-display), Year of construction: 2023, power: 5.5 kW (7.48 HP), cutting height (max.): 2,110 mm, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting depth: 80 mm, Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces) Iisdpfx Apstwpgmonsb

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Connected load 380V 21A Iodpfx Apsiamufsnsib Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling