Used Holzher Beam Saw for sale (170)

Condition: used, used, in good condition with new feed rollers Brand: Holzher Dwodpfxoyztzko Al Sec Type: ET2 Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Djdpfswwhn Dex Al Sswc

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Dwjdpfxeyg H His Al Ssc Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Pre-milling Fine milling Djdpfx Asz A Dhrjl Sswc Cutting twice Pull knife Smoothing Year of manufacture is estimated Machine was stored a year ago Until that time, it was fully functional.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Dodpfx Aovvi Nbol Sewc

Condition: excellent (used), Excellent condition, only 600 operating hours, 1402 DS model. Djdpezzkh Ejfx Al Sjwc

Condition: used, Year of construction: 2009, 0,4-6 mm Dedpfezy Sfcsx Al Sjwc Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Djdpfx Aogyg Arsl Sowc -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness Dedpfox Eilqex Al Sswc with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Djdpeiamufsfx Al Sswc Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit Djdpfx Aljzxww Ue Sjwc • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm Dsdpowv Uq Asfx Al Sjwc - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 15511601/120, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 4,045 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 317 mm, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,200 mm, Equipment: CE marking, documentation/manual, HOLZ-HER Horizontal-Nesting-CNC Dynestic 7507, Baujahr 2018, Lieferung ab Standort Enthalten: Software Campus V7 CAD/CAM, 1 Floating License CAMPUS V7 „Better Nest“ für rechteckige Bauteile High-Speed-USB-Server Handbedieneinheit Bedienpult mit 21,5" 16:9 Flachbildschirm Bohrkopf 7884, 14 Spindeln 10/4 inkl. Nutfräse Guscugw Njy Nzubouob Fräseinheit 7830, 8 kW (S6/40) Werkzeugwechsler, 6 Positionen, Pick-Up-Ausführung Werkzeugwechsler 7872 mit 1 Werkzeugfach, in X- und Y-Richtung schwenkbar Dwjdsy Nzubopfx Al Soc Winkelgetriebe 7868 Individuelle Hinteranschläge ECO Vac – intelligentes Vakuumsystem Vakuumpumpe 3 x 140 m³/h = 420 m³/h, luftgekühlt Sicherheitslichtschranke Zentralschmierung, manuell EasyLabel-Drucker 1 zusätzliche Bearbeitungsstation A, hinten mit Anschlag Wärmetauscher zur Steuerungsschrankskühlung, max. 32 °C DC-Notstromversorgung (USV) Personensicherheit durch vertikale Sicherheitslichtvorhänge an allen vier Seiten der Maschine, für optimalen Zugang zum Maschinentisch. Manuelle Schmierung – Schmierstellen für alle Linearführungen in X, Y und Z sowie für alle Kugelgewindespindeln in X, Y und Z. Zusätzlicher Vakuumanschluss für 10 Vakuumsauger inkl. Wechselschlauch Vakuumsauger

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm Dwsdpjgyg Avjfx Al Sec -Weight: 81 kg

Condition: used, Year of construction: 1992, functionality: fully functional, HOLZ-HER Type 1370 wide-belt sanding machine / fine sanding machine, manufactured in 1992. The machine was last used and is described as being in working order and having been inspected. Technical data: - Working width: maximum 1,100 mm - Workpiece passage height: 2–100 mm - Sanding unit: 15 kW - Brush: 0.55 kW - Feed: 1.1 kW - Total power: approx. 17 kW - Connection: 380–400 V / 50 Hz - Dimensions: approx. 1,730 x 1,340 x 1,380 mm - Space requirement, depth including roller tables: approx. 2,500 mm - Weight: approx. 1,935 kg, plus roller table approx. 80 kg - Dust extraction connection: 250 mm Accessories: roller tables, sanding belts, tools, operating manuals, wiring diagram, and spare parts documentation. Dwodpfx Alozrn Abs Sjc Important note: The rubber transport rollers have hardened due to age and should be replaced as soon as possible. Location: 65618 Selters (Taunus), Germany.

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Djdpjx Huhcsfx Al Sewc Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: good (used), Year of construction: 2002, 0,4-3 mm Dwsdpfx Aozmy N Nel Sjc Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HOLZ-HER EVOLUTION 7405 (2021) – Like New! Only 202 Working Hours HOLZ-HER EVOLUTION 7405 vertical CNC machining center for sale. Excellent condition, barely used, fully operational under power. Quick Specs: - Year of manufacture: 2021 - Active milling hours (Vorschub aktiv): ONLY 202 hours! Djdpfozutd Njx Al Sewc - Total machine uptime: 1,860 hours - Serial No: 1195/2-109 - Made in Austria (CE) Features & Software: - HOLZ-HER CAMPUS / HOPS active / Betternest - Vacuum-free automatic panel clamping system - Complete 4-side routing, drilling, and grooving - Compact vertical design (under 5 m² footprint)

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Dwjdpfx Aszk N U Asl Sjc Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: used, with new feed rollers used good condition cleaned functionally tested Manufacturer: Holz-Her Type: ET 117 Machine No.: 7901 Motor with pole change, 2 speeds Roller diameter mm: 110 Dodpfez I Uduox Al Sewc Roller width mm: 50 Number of feed rollers: 3 Speeds m/min: 4, 6, 8, 12, 10, 15, 20, 30 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition, as inspected, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Z-Achsen-Verfahrweg = 240 mm Djdpoy Ny Uyofx Al Sewc Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Djdezk N Euopfx Al Sowc Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: used, Year of construction: 2021, functionality: fully functional, Return-Master 5920 return system, 4 years old. Serviced by the top-tier Dimpex service team. Serious inquiries only!!! Dwjdoyhpynspfx Al Soc

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Dwedpfeyzg Dfox Al Ssc Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Joining milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 - Trimming unit 1822 - Milling unit 1942 M: radius, chamfer, flush Dedpfjzk Nlhox Al Sjwc - Blowing nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Exhaust hood set - Protective hoods, complete - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Rake blade unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper unit connection: 70 mm - Compressed air: 6 bar