Used Holzher Contrigo for sale (173)

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Gsdpovvkdtefx Aadsin

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Giodpfx Aasvvkfdsdsn

Condition: used, Storage location: Nattheim Gsdpfsvvkrdsx Aadein

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Giodevvi R Ejpfx Aadon Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Gjdpfxsvvkg Io Aadoin

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Gedpfxjvvi Spe Aadein

Condition: used, Cutting length: 4300 mm Cutting height: 2200 mm Saw blade diameter: 300 mm Giedpfeyiyh Eex Aaden Cutting depth: 80 mm

Condition: used, Holz Her Auriga 1308 XL POWER Compact design – edge thickness 0.4 – 8 mm Motorized bridge adjustment Edge-Control PLC touchscreen control, PPC 319W, 18.5" touchscreen monitor iTronic Adaptive pressure, glue quantity control and cleaning routine fa.s.t. setting technology “setup in the gap” Long infeed fence with motorized adjustment Pre-milling unit for processing before the gluing station Fully automatic edge magazine for coil and strip material GLU JET cartridge glue station + PU gluing, with sensing nozzle Workpiece height: 8-60 mm High-gloss package Pneumatic pressure unit Pneumatic cross-cut unit for coil and strip material up to 8 mm edge thickness, with pneumatic tilt adjustment from 0-10° for the cross-cut saws FR301 MOT6 multifunctional milling unit: flush milling 8 mm, radius milling – chamfer milling at 15° via NC axes FF301 MOT1 contour milling unit: corner rounding up to 3 mm edge thickness or optionally 45° chamfer, working height 12 – 60 mm, postforming possible Attachment kit for shelf processing Godpfsyh Ilysx Aadoin ZK301 MOT4 scraping unit, for chamfers and radii with 2 scraper holders via NC axes FK701 surface scraper unit with pre- and post-sensing – finishing Buffing unit – polishing Spraying system at infeed and outfeed Complete DIA tool set included First delivered: 2022 Machine is in TOP CONDITION from business closure – small business Ex stock Lieboch

Condition: used, Year of construction: 1997, HolzHer Edge Banding Machine 1436SE Year of manufacture: 1997 - PVC Primus, 3mm PVC cartridge system - Edge banding, flush cutting, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length: 4500mm Depth: 1020mm Height: 1630mm - Connection nozzle: 140mmØ - Minimum workpiece width: 60mm - Feed speed: 11m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strip material, 2mm for coil material - WITHOUT pre-milling unit Giodjwv Uq Aopfx Aadsn

Condition: good (used), Year of construction: 2011, Panel saw HOLZ-HER Model: 1255 Condition: used Year of manufacture: 2011 Cutting length: 6300 mm (max) Vertical cutting height: 2200 mm (max) Horizontal trimming height: 2200 mm (max) Workpiece thickness: 60 mm (max) Scoring height horizontal: trimming height Scoring height horizontal: 2040 mm (max) Voltage: 400V 50 Hz Weight: 920 kg Equipment: - Operating manual - Next UVV safety inspection: 05/2026 Gisdpfx Aaex Hyr Hjdon

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 spindles in X- and 6 in Y-axis - Individually selectable - T-shaped arrangement - Max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating clockwise/counterclockwise rotation - n = 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swiveling Gisdpfx Aex Enpqeadsn - n = 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - 6 kW spindle, water-cooled - Milling unit 7982: - For lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine Godpfxsbahd Eo Aadein edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Gjdpeyg H Hiefx Aadein Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Gjdpfx Ajvwfmxeadoin

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Godevwfnpjpfx Aadein

Condition: used, Year of construction: 1984, used Make Holz-Her Type 1215 Year of manufacture 1984 Motor 4.0 kW Gisdsvwgi Ispfx Aadon Cutting length approx. 5300 mm Cutting height approx. 2200 mm Center support Saw blade diameter approx. 300 mm, cutting depth 80 mm Free-standing Slatted frame moves away Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Very good condition. Ready for work. Gijdpfx Aaeygw H Hjdon

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. Giodpfxewn Nuae Aaden 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) Gijdpfoxymd Tsx Aadsn - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, used, in good condition, low hours Manufacturer: Holz-Her Model: ET 1117 Machine no.: 374646 GS-certified Motor with pole-changing capability, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 units with stand 8 speeds Weight approx. 60 kg Gjdpfx Aaeycxhdjdjin Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch Giodpfxeyfn Uro Aadsn

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate settings Fully automatic edge magazine for coil and strip material Gluing station: Glue pellets + PUR application Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for coil and strip material up to 3 mm (6 mm) edge thickness Adjustable bevel from 0-10° on the trimming saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraper unit for bevels and radii Flat scraper unit - finishing Machine is INSPECTED and in TOP CONDITION from a very well-maintained workshop Available from stock in Lieboch Giodpfx Aaeyfn Tnsdjn

Condition: used, Holz Her Accura 1556 Premium fully equipped, modern edge banding machine First delivered in 2021 Machine is in EXCELLENT CONDITION Available from stock in Lieboch Gijdpfxeyfndae Aadsn

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V Gjdpfsb A E Uhjx Aadoin -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: used, Heavy-duty semi-automatic vertical panel saw for wood Her Supercut 1216 Cutting area: 5300 x 2200 mm Max. cutting depth: 80 mm Swivelling control panel Central display for horizontal and vertical cuts Giedpfxoyffalo Aaden Pneumatic lifting and lowering of transport rollers Pneumatic indexing for vertical cuts Pneumatic locking for horizontal cuts Pneumatic plunge of the saw unit Extraction at the cutting point Saw motor: 5.5 kW CE compliant Machine is FULLY FUNCTIONAL and in VERY GOOD CONDITION Available ex-stock Lieboch