Used Holzher Contrigo for sale (159)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,747 mm, travel distance Y-axis: 1,554 mm, travel distance Z-axis: 325 mm, workpiece length (max.): 3,620 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 180 mm, Equipment: rotational speed infinitely variable, Holz-Her / Machining Center PRO-MASTER 7017 - 2 software licenses (Office & Machine) Campus V8 CAD / CAM software - Machining area for milling = 3425 x 1287 mm (minus cutter radius) - Maximum workpiece height: 180 mm, measured from the top edge of the vacuum cup: 125 mm. - Maximum pass-through width at hood: 1450 mm (Y-direction) - The milling spindle delivers 10.3 kW (S6) and accepts tools with a maximum diameter of 160 mm via HSK interface. Fsdpfx Adsxdlrdsaopp - Vector axis / C-axis can be retrofitted - Drilling unit with 14 spindles: 10 vertical and 4 horizontal. Maximum drill diameter: 35 mm. Integrated saw unit for a saw blade with a maximum diameter of 125 mm and 4 mm thickness. - 12-position linear pick-up tool changer for HSK 63F holders for tools up to a maximum diameter of 95 or 100 mm. Please also visit our "Classic Shop" on our homepage.

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER Fjdpfxegxpilj Adaopp

Condition: defective spare-parts repository (used), HOLZ-HER 1230 Automatic. The machine's controller lacks the panel required for automatic formatting. With the help of an electrician, it can be converted to normal automatic operation. Until then, operation is not possible in either manual or automatic mode. Industrial machine in good condition, but thus it is advertised in incomplete condition. Fpsdpfx Aouuf Akjdaep

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Fpsdpfjxf H Rdsx Adasp Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: excellent (used), Pressure beam saw HOLZ-HER 6210 CUT 85 -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, feed rollers, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,250 mm, cutting width: 4,250 mm, max. cutting height: 85 mm, number of clamping claws: 7 pcs, number of trim stops: 3 pcs, main saw motor power: 11 kW, scorer motor power: 2.2 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, extraction nozzle Ø bottom: 140 mm, extraction nozzle Ø at pressure beam: 2 x 120 mm, compressed air connection: min. 6 bar Fodpjwz Rkcjfx Adajpp Quality information: - Saw spindle newly mounted - Scoring unit newly mounted - Complete basic inspection - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: used, Used Machine Used Holz-Her Type 1211 Vertical Panel Saw Older model; only suitable for rough rip cutting MNo.: 360726 Technical Specifications: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Max. saw blade diameter 300 mm Motor power 4 kW Availability: Short term Location: Röllbach Fjdpowka Ngefx Adajpp

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Fpjdpfxsw I Er Ts Adaop

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls Fpjdsv D Nugjpfx Adasp -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Fjdpfx Aowftb Ssdaepp

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 372/1-606, Brand: Holz-Her Model: CUT1254 Machine no.: 372/1-606 Year of manufacture: 2016 Stock no: 2002582 Tech. info: Working dimensions Cutting depth: 60 mm Cutting length: 4300 mm Cutting height: Max. height of workpiece 2200 mm (cutting height 2110 mm) Saw unit Motor power: 4 kW Saw blade diameter: 250 mm Saw blade speed at 50 Hz: 5450 rpm Fpedpfx Adsw Udz Hsaep Dust extraction Air requirement 1400 m3 /h Air speed 20 m/sec Connection diameter for accessories 120 mm Connection diameter for frame ends (TRK version) 100 mm Static vacuum 1100 Pa Weight (kg) 1200

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Fsdpfx Adswxr Dxsaspp

Condition: used, Year of construction: 2019, Used Machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting machining with wear plate Processing length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the moving gantry, aggregate head, and consoles Gantry-type moving gantry Rack and pinion drive, helical gear, in X and Y axes, Ball screw drive on Z-axis for precise positioning Technical Data: Fpodpfxowkbbde Adaep Working dimensions: Maximum support area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel distances: X = 4695 mm Y = 2100 mm Z = 293 mm Maximum clearance height DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table: Fixed, continuous processing table with grid pattern, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum Fields: 1-circuit vacuum system Drilling Unit 7877, 19 spindles Drive power: 1.7 kW 13 individually controllable vertical spindles U-shaped configuration 5+4 in X-direction and 4 in Y-direction 32 mm pitch Maximum drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation: Alternating right / left Speed (n(max.)): 1000 – 4400 rpm, infinitely variable Mounting: M10 thread - 11 mm fitting Without tools, without holders 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Total drill length max. 63 mm from mounting end Without tools, without holders Milling Unit 7842: Power: 12.0 kW (S6) Speed (n(max.)): 1000 – 24000 rpm, infinitely variable, max power at 12000 rpm up to 24000 rpm air cooled with HSK-F 63 tool holder with right-hand thread nut (for right-hand rotating tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Maximum tool weight: 6 kg (incl. holder) Tools: Milling and grinding tools max. diameter 160 mm Safety enclosure according to CE regulations Safety fence at sides and rear Vacuum pump 500 m³/h dry-running Personnel safety through light barriers in front area of the machine Handheld remote control for machine operation to include the following operating functions: > Start/Stop of processing program > Speed control of processing cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM Software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM functionality for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional sealing against dust through overpressure in each carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screw drives in Y and Z axes, for all milling spindle

Condition: good (used), roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 started box/ total approx. 7000 pieces -Type: 3.0x25 A2 stainless steel Fodpfjv D U A Asx Adajpp -Price/Delivery: complete -Transport dimensions: 490/300/H140 mm -Total weight: 12.7 kg

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Fsdpfx Aougmw Eedajpp

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Fpjdpswwdt Nefx Adaep Visible cut line laser Paper storage compartment Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm Fsdevpf Utepfx Adajpp -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Base Machine - DYNESTIC 7532-10.5 Automatic Dynestic Table For classic nesting operations with wear plate Processing length: 3100 mm Machine frame of welded construction with ground and hardened prism guides for the gantry, tool head, and consoles Gantry-type carriage Helical rack and pinion drive in X and Y axes, Ball screw in Z axis for precise positioning Technical Data: Processing dimensions: Maximum workpiece area on nesting table: X = 3100 mm, Y = 1560 mm Maximum travel paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm Maximum clearance height on DYNESTIC table: Z = 100 mm from table surface (without wear plate) Maximum programmable speed: Fsdpfewka Upjx Adajpp Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC Table: Solid, continuous machining table with grid pattern, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum zones: Single-circuit vacuum system Drilling unit 7877, 19 spindles Drive power: 1.7 kW 13 individually selectable vertical spindles arranged in U-shape 5+4 in X-direction and 4 in Y-direction 32 mm pitch Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (dependent on panel thickness) Spindle stroke: 70 mm Direction of rotation: alternates clockwise/counterclockwise n(max.) 1000 - 4400 rpm, steplessly adjustable Mount: M10 thread - 11 mm locating seat Without tools, without collet 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Mount: M10 thread, 11 mm locating seat Max. total drill length: 63 mm from mounting end Without tools, without collet Milling unit 7842 Power: 12.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, Max. output at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-hand thread (for right-handed tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (including holder) Tools: milling and grinding tools max. Ø 160 mm Safety enclosure according to CE standards Safety fence on the sides and rear Vacuum pump 500 m³/h, dry-running Personnel safety via light barriers in the front machine area Handheld remote control for machine operation with the following functions: > Start / Stop machining program > Speed adjustment of machining cycles > Reset button > Manual feed / rapid traverse for all axes > Emergency stop CAMPUS V7 CAD/CAM software 1x machine license Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS: Graphical variant system with conversational and CAD/CAM features for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional dust sealing by positive pressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y, and Z axes, for all ball screws in Y and Z axes, for all milling spindle guides

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK Fpsdpfx Asv D Nvdedajp .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Fpedpfx Aow I U Ecjdaep Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: good (used), roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, roofing nails, nail rolls, 1 box/ total approx. 7200 pieces -Type: 3.0x22 A2 stainless steel -Price/Delivery: complete Fpjdpfx Adsv D U Ekeajp -Transport dimensions: 490/300/H140 mm -Total weight: 12.6 kg

Condition: used, Year of construction: 2005, Used machine Year of construction 2005 cutting length 4300 mm Fodpfswqifkex Adajpp max. passage height 2200 mm max. trimming height 2100 mm max. vertical scoring height 2100 mm cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Extraction 2 x 100 mm Compressed air consumption 60 NL/min L x W x H 5620 x 1480 x 2990 Availability: approx. February 2025 Storage location: Wuppertal

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm Fpjdpfx Aogyg Arjdajp -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing Fpsdpfjvzyblox Adasp

Condition: used, Electric motor, three-phase motor Fsdpfjg Ehagex Adaspp -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Condition: used, Chip extraction, filter extraction, bag filter Fpedpfxjb A E Uho Adasp -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg