Used Holzkraft Asa 2053 for sale (174)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, Available from the last week of August. We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, manufactured in 2022. The machine was installed and put into operation at our facility in May 2023. Holzkraft VPS 2241 VR ED – vertical panel saw (commissioned in 2023, excellent condition) The machine is connected and can be tested. Selling my vertical panel saw, Holzkraft VPS 2241 VR ED, purchased and assembled new in 2023, and therefore in very good condition. Selling due to expansion. Features & Highlights: • Scoring device for clean, tear-free cuts • Digital measuring displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Vertical/horizontal switching • Robust, torsion-resistant machine frame • Integrated dust extraction for direct connection to a dust extraction system The machine runs perfectly, no defects. Dcsdpsyxv T Refx Amgsi Technical Data: • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg Condition: • Year of manufacture 2022 / Installation: 2023 • Low usage • Ready for immediate use If you have any questions or require more information, please send us a message or call us.

Condition: new, Year of construction: 2022, machine/vehicle number: 338, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 200 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, Equipment: saw blade guard, scorer, - Blade tilt and height adjustment are manual - Max. cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds of 2800/3665/4800 rpm - High weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum fence with two folding stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity - Multiple locking mechanisms on the sliding table Dedoza D Sijpfx Amgoci - Standard equipment includes a table extension and a steel sheet table extension - Large pivoting guard can be easily raised using a gas spring - Saw blade clamping via a tool-free rapid clamping system

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Dcodpol D Rx Uofx Amgoi Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Condition: used, Year of construction: 2005, functionality: fully functional, New in the offer SCM MB 21 / HOLZKRAFT TECNOMAX MB21 Multi-spindle drilling machine Table width: 905 mm Maximum drilling stroke: 60 mm Drilling spindles: 21 Drill spacing: 32 mm 2 parallel stops Pneumatic tilting drilling block Pneumatic workpiece clamping Dcodpfx Aezaddfsmgei Pneumatic clamping: 3 Workpiece support: standard table Drilling depth adjustment: turret-type stop Conformity marking: CE mark Weight: 267 kg Space requirements: Length: 1 m Space requirements: Width: 1.1 m Space requirements: Height: 1.3 m

Condition: new, Year of construction: 2026, functionality: fully functional, CNC Milling Machine startech cn k with Store Equipment BRAND NEW MACHINE Djdpeyx Dzvjfx Amgeci Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm. Spindle drive via a powerful 2.4 kW motor. Intuitive, user-friendly machine software for PC included, featuring an open interface compatible with various CAD/CAM programs. Technical Data: - Work table: 760 x 1170 mm - Spindle speed: 24,000 rpm - Maximum workpiece dimensions X: 915 mm - Maximum workpiece dimensions Y: 610 mm - Maximum workpiece dimensions Z: 176 mm - Number of drilling spindles: 1 - Maximum tool diameter: 60 mm - Maximum travel speed X-axis: 5 m/min - Maximum travel speed Y-axis: 5 m/min - Maximum travel speed Z-axis: 2.5 m/min - Suction connection nominal diameter (external): 40 mm Includes: - 5 pneumatic suction cups For positioning on the work table Simple workpiece clamping - Pneumatic working pressure: 6.5 bar - Compressed air requirement: 120 l/min Incl. wetCAT 141 RS-TOOL M-Class Wet & Dry Vacuum Cleaner by CLEANCRAFT - For extraction of dust from, e.g., hardwood, plaster, paint, concrete - Automatic filter cleaning - Air volume: 4560 l/min - Dust class: M - Container capacity: 41 l - Hose diameter: 33 mm - Sound pressure level: 74 dB(A) - Power input: 1.1 kW - Max. device socket connection: 2.4 kW - Connection voltage: 220 – 240 V - Mains frequency: 50 / 60 Hz List price (RRP): €14,789.00 Available at short notice Shipping available at additional cost

Condition: as good as new (ex-display), functionality: fully functional, empty load weight: 380 kg, Dear Sir or Madam, We are offering you a "HOLZKRAFT" vertical wood band saw. Model: HBS 633S - Quick-action saw blade tensioning system - Precision saw blade roller guide - Fast and precise cutting height adjustment via handwheel and rack and pinion with millimeter scale - Safety switch for automatic shutdown when the door is opened - Large cast parallel stop - Angle stop - Table tilt via rack and pinion and handwheel - Saw blades Technical specifications: Cutting height 90° max. 400 mm Maximum cutting width with stop: 570 mm Maximum cutting width without stop: 610 mm Cutting speed 1,630 m/min Djdpfxowhmtte Amgjci Saw blade length 4,600 mm Table dimensions: Table length 830 mm Table width 600 mm Table height 830 mm Table tilt 0 – 45° Machine dimensions L x W x H 119 x 82 x 206 cm Machine weight 380 kg

Condition: reconditioned (used), Motor 5 kW Dcedpfjy Hkzfox Amgoi electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Djdpfx Asyn Ny Ujmgoci Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, Dcjdpfx Asvl Eynjmgji from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft surfacer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Surfacing table length 2,250 mm, 4-knife TERSA cutterblock, Motor 7 kW (9.5 HP); S6 5 meter connection cable 2.5 mm² with 16 Ah plug, complete with: simultaneously foldable tables, combined extraction hood for surfacer and thicknesser D = 120 mm, Thickness table adjustment via handwheel with integrated readout, star-delta switch, Dcedpfsxn Suaox Amgsi auxiliary fence, CE and BG - wood dust certified. Order no.: 5503501 Available immediately ex location Seevetal, without transport, subject to prior sale.

Condition: new, Year of construction: 2025, Working width: 420 mm Planer shaft: Tersa Number of knives: 4 Jointer table length: 2000 mm Concave/pointed joint adjustment: no Dsdpfx Ajxrbg Hemgjci Adjustable jointer fence angle: yes Lifting jointer tables: manual Maximum thicknesser pass height: 240 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: new, Year of construction: 2025, Cutting length: 4100 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring saw: yes Dcjdpfx Ashpma Nemgei Feed: manual Display for horizontal cut: digital Display for vertical cut: digital Saw blade diameter: 300 mm Adjustable material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5300 mm Machine depth: 1800 mm Machine height: 3100 mm Weight: 800 kg

Condition: reconditioned (used), machine/vehicle number: 2433345525, functionality: fully functional, Suction nozzle, 125 mm Nominal volume flow rate 884 m³/h Motor power 2.2 kW, 16 A Mobile Weight approx. 194 kg L x W x H: 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual vibration Djdpjiw D U Njfx Amgoci

Condition: excellent (used), model : RLA200 Djdpfsv Rnpcjx Amgoci

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Djdpfsvxr Rgsx Amgeci

Condition: new, Description: Planer Surface planer with TERSA quick-change planing knife system With TERSA cutterblock for changing planing knives in seconds TERSA planer blade system enables particularly quiet running Helically toothed steel infeed roller for constant and even wood infeed The particularly long, one-piece planer tables enable easy planing of the workpieces Large planing fence can remain in position when the planing tables are opened Dressing tables open to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Special equipment features Work tables are made of gray cast iron, annealed and stress-free, making them robust and permanently flat Table lips for quiet running Equipment details TERSA planer cutterblock No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result Suction hose connection The extraction nozzles of the jointer and thicknesser point in the same direction. The hose is connected from one side only. No hose is required to reach around the machine. Dcedeu Diwlopfx Amgji Drive Sturdy chain drive Steel drive wheels Solid cast iron bearing block Planing unit Solid kickback guards prevent workpieces from kicking back 3-blade TERSA shaft ensures an optimum planing pattern The material infeed Helical-toothed steel feed rollers for constant and even material feed without marks Several teeth engage simultaneously for powerful feed Wear-free in contrast to rubber feed rollers Technical data Jointer total table length 1510 mm Jointer working width 300 mm Jointer chip removal max. 4 mm Thicknessing dimensions thicknessing table 565 x 300 mm Thick working height min. 3 mm Thick working height max. 230 mm Thicknessing feed speeds 7 m/min Planer shaft speed 5200 min-1 Planer shaft diameter 72 mm Number of planing knives 3 pcs. Electrical connection 400 V Motor power 4.0 kW Suction nozzle diameter 2 x 120 mm Weight 270 kg Optional slot drilling device Table size 470 x 220 mm Optional slotted hole drilling device transverse/longitudinal stroke 160 mm / 110 mm Optional slot drilling device vertical stroke 120 mm Scope of delivery & equipment TERSA planer cutterblock Anodized aluminium planing fence

Condition: as good as new (ex-display), functionality: fully functional, type of input current: three-phase, total width: 770 mm, total length: 1,030 mm, total height: 1,100 mm, input voltage: 400 V, saw blade diameter: 700 mm, working height: 700 mm, overall weight: 93 kg, Description: • Enclosed and secure saw area for increased safety, complying with legally mandated saw blade guard • Anti-twist device for logs thanks to punched-in retaining claws in the rocking table • Stable, torsion-resistant steel frame • Transport wheels for easy mobility • Impact, scratch, and weather resistant due to high-quality powder coating • Phase inverter Technical Data: Dimensions and Weight: Length (product) approx.: 1030 mm Dodpfx Amoyddm Ujgjci Width/Depth (product) approx.: 770 mm Height (product) approx.: 1095 mm Net Weight approx.: 92.5 kg Working height: 700 mm Rocking table support: 740 mm Drive: Drive type: Electric motor with direct drive Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Output power: 3.835 kW Input power: 5 kW Noise emission: Sound pressure level Lp: 101 dB(A) Sound power level Lw: 115 dB(A) Saw blade: Saw blade circumferential speed: 51.3 m/s Saw blade diameter: 700 mm Cutting capacity: Max. cutting capacity, rocking table round timber: 250 mm Scope of delivery: 1 x carbide-tipped saw blade Ø 700 mm

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dsdpfevyuqfjx Amgoci

Condition: new, - Heavy profile design with high dead weightfor maximum running smoothness- Smooth and precise running thanks to torsion-freemachine housing- Large cast iron saw table made fromone piece, tiltable from 0° to 45° withground and polished surface- Large cast iron parallel fence- Fast and precise cutting height adjustment viahandwheel and gear rack with millimeter scale- Angle stop as standard- Precision 3-roller saw band guide with guide rollerstop and bottom, with fine adjustment- Eccentric quick-release lever. The basic tension settingis not changed, with integrated saw bladetension indicator- The saw table is mounted on a double rocker support,{The saw table is mounted on a double rocker mount,simple and quick fixing of the set tilt angle via quick clamping- Eccentric quick clamping lever- The basic tension setting is not changed- With integrated saw blade tension indicator- The solid cast iron saw table is easily and convenientlyadjusted via a handwheel rack and pinion guide- The tilt is infinitely adjustable from 0° to 45°- Simple and quick fixing of the set tilt angle viaquick clampingTechnical data:Work table dimensions 750 x 530 mmCutting speed 1400 m/wheel diameter 530 mmmax. cutting height 350 mmmax. cutting width with fence 465 mmmax. cutting width without fence 510 mmmax. cutting width without stop 510 mmsaw blade length 4190 mmprecision guide top/bottomsaw table inclination 0° - 45°with gear rack handwheelmotor power 400 V/50 Hz/P2 3.75 kWweight 305 kgdimensions1000x720x2040 mmsuction nozzle diameter 2 x 100 mmincluded:1 saw blade set, length 4190 mm, . 515 5313 SETStorage location 97447 Gerolzhofen Dodpovwfbcefx Amgsci

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Dsdpfx Aovwflbemgeci

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Dcedpfx Amovwfmljgji

Condition: new, - New -Description:- Vertical version for splittingShort and meter wood- Robust and solid construction- Shock and scratch resistant due to high qualitypowder coating- Fast, tool-free gap height adjustment- Low base plate for easy,effortless loading of large logs- Phase inverter on all 400V models- Convenient transport with hand drawbardue to standard chassis with largePneumatic wheels and additional support wheel- Space-saving storage through simplelowerable cylinder- Powerful industrial hydraulic system- Two-hand safety circuit- With splitting material holderTechnical specifications:Dimensions and weightsLength approx. 1050mmWidth/depth approx. 1700 mmHeight approx. 2500mmWeight approx. 373.1 kgdrivePTO speed 540 rpmInput power 5.5 kWelectrical dataConnection voltage 400 VMains frequency 50 Hzdevice dataSplitting power max. 26.1 tGap length min. 560 mmGap length max. 1100 mmLog diameter min. 80 mmLog diameter max. 400 mmhydraulic systemHydraulic oil tank capacity 30 lItem No. 5981031 Dedpfjvwfziex Amgoci

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Djdpfx Amjvwgaajgjci

Condition: new, - NEW -DESCRIPTION- Heavy-duty design with high dead weight for maximum running smoothness- Particularly quiet and precise running thanks to torsion-resistant machine housing- Cast flywheels with rubber coating and cleaning brush- 3-roller precision saw blade guide as standard at top and bottom- Large cast iron saw table, swivels from 0° to 15° with ground and polished surface- Large cast iron parallel fence with round bar guide, easily adjustable- Saw blade tension indicator- Precise cutting height adjustment via toothed rack with millimetre scale- Self-braking motorAvailable on request- Version with cutting height up to 1650 mm- Other special versionsTable, motor and switch must be assembled on siteTECHNICAL DATADimensions and weights- Length (product) approx.1050mm- Width/depth (product) approx.720mm- Height (product) approx.2180mm- Weight (net) approx.320kgSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 885mm- Work table width 600mm- Work table height 840mm- Work table inclination 0 - 20°Electrical data- Supply voltage400V- Mains frequency50Hz- Output power2.2kWCutting ranges- Cutting height max. 90°400mm- Cutting width max.620mmSaw blade- Saw blade speed(s) 1630m/min- Flywheel diameter 640mm- Saw blade length 4780mm- Saw blade length min. 4770mm- Saw blade length max.4810mm- Saw blade thickness 0.5 - 0.6- Saw blade guide Precision guide top and bottomOrder number: 5152164 Dcjdpfjvwfvajx Amgji

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Dodpfxsvyup Us Amgjci