Used Horizontal Flow Wrapping for sale (29)

Condition: used, Year of construction: 2010, We offer this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original replacement controllers for this model year are often no longer available, this upgrade provides long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 hp / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & Equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables up to 50% faster cuts compared to standard systems. Scope of delivery: • Waterjet cutting system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal incl. software Chedpfx Abozwpfhsrsd • Technical acceptance report / service report from 01/2026 Location & Inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from September 15, 2026. Sales & Legal notes: The sale is exclusively in the B2B sector (commercial sale) with the exclusion of any liability for defects, guarantee and warranty ("sold as is"). Returns, exchanges and renegotiations are excluded. All information, data and descriptions are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy and topicality. The buyer is required to check the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are the sole responsibility of the buyer and at his expense. If you have any questions or require further information, please feel free to send us a message or call us. Waterjet cutter, Waterjet cutting machine, Découpe jet d'eau, Taglio a getto d'acqua, Wycinarka wodna, Rezanie vodným lúčom, 5-axis waterjet, Dynamic XD, Flow HyperJet, 4000x2000, Large format cutting system.

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Cjdjywzhkopfx Abrohd Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Cedoy D Uzqepfx Abrohd This is an ex bakery machine, in good working condition Price € 5,900

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Chjdpswd Sh Ujfx Abrsd Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages Chsdshw Nfqspfx Abrsd UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you. Csdpfjy Rvfqsx Abrshd

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Csdpfe Ahgrtjx Abrshd Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 387818, operating pressure: 4,000 bar, Mechanical part and the pump in working order, electric box partially defective. Cjdpfxo Ahd Tlj Abrehd Buyer is responsible for de-installation and transport.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge Cedpfsxwtu Tex Abrehd 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, input voltage: 480 V, input frequency: 60 Hz, FLOW Mach 4 Waterjet Cutting Machine (6000 bar) Main specifications: Manufacturer: FLOW Model: FLOW Mach 4 Working area: 4 x 2 m Year of manufacture: 2014 Chedps Agug Nofx Abred Pump: WMC 87k High-Pressure Intensifier, 6000 bar (dual intensifier) Pump power: 100 HP Cutting head: 3-axis with taper compensation During cutting, the water jet naturally forms a slight cone, which can cause the edge of the part to be slightly angled. The taper compensation automatically tilts the head, ensuring that the edges remain straight and perpendicular. This results in higher accuracy and cutting quality, especially on thick materials, without the need for any secondary machining. Key advantage: spare intensifier included The machine comes with an additional spare intensifier. This is a significant advantage, as the intensifier is one of the key components and the most heavily loaded part of the pump. Having a spare on hand allows for a quick return to work if the main intensifier requires servicing, minimizing downtime. Included with the machine and pump: - Water filtration station - Abrasive feeder - Several spare parts - Spare intensifier - Abrasive removal system Condition: The machine has been operating continuously, 24/7, so we cannot provide the exact number of operating hours. However, it has been maintained according to FLOW’s service schedules throughout this period. The machine is still in operation.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Chsdpfey Urzisx Abred Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance Chedpfx Abjzvcknored The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Chjdpfjz S S Efex Abred Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Chsdpsy D A Ifjfx Abred Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, For Sale: Flow 9XVD-55 High-Pressure Pump We are offering a Flow 9XVD-55 high-pressure pump for waterjet cutting applications. Condition: The machine is disconnected and ready for collection. Sold in its current condition. Chedpozrznwefx Abred Suitable for recommissioning, refurbishment, or spare parts. Specifications: Manufacturer: Flow Model: 9XVD-55 Type: High-pressure pump for waterjet systems Many spare parts according to the photo. Complete manuals included. Inspection is possible by prior arrangement.

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. Chjdpfx Aszp Ik Tsbrod It can be inspected while in operation.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Chodpfex D Rxpox Abrsd

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption Cjdpfxozia Ids Abrshd 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit Chjdpfx Absvvl Ugjrjd -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Csdpfxszka Ime Abrohd

Condition: used, angle steel/side length / mm double T-iron on the x-axis / mm Chedpfozu A Uqjx Abred U-iron on the x-axis / mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “HP Color LaserJet Flow E87740”. Item for sale: 1x HP Color LaserJet Flow E87740 with the following specifications: Chjdez Arvyjpfx Abrsd Includes duplex ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,232 pages Colour: Approx. 558 pages Black: Approx. 1,674 pages Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer! Chodpfxsguqucj Abrsd

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Chjdpfx Aozdtqujbrsd Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Chodpfxozdty Ne Abrsd Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.