Used Warm Air for sale (34,073)

Condition: new, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Tedoxgbbtepfx Adlef Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Good condition Todpfx Adsxciugolof

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Tedowb A Hiopfx Adljf Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t Tedpfx Adsw Ucfdjlof with control system with warm air blower

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Tsdpsvz Hq Tjfx Adlsf Weight 500 kg Total power requirement 1 kw

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Todpfxjvnuq Is Adlsf Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Tjdpfx Ajxli I Ssdlef Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Tedpfx Aevwf Rkodlef

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Todpfxjwb Axrs Adljf You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2020, operating hours: 0 h, condition: new, 4 Stationary Warm Air Heaters S / SC oil/gas from Knoll for sale. Purchased in 08/2022 from DEXES Berlin, Original: 12.499 € net/piece; Warranty until 7/2024. 2 pieces unused (11,000 € net/piece); 2 pieces were used only 3x: for this the price is further negotiable. Tjdpfxjppv Hbo Adlsf Location 95506 Kastl; to be sold individually; Self-collection desirable. The warm air heater is already equipped with an oil burner / nozzle and room thermostat.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Total power requirement 1,2 kw Todpjvz Hq Hefx Adljf

Condition: ready for operation (used), Year of construction: 2010, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with Tsdpfx Aovnu Aksdlef quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: new, - NEW -without side panel and without base frameKanuk® OriginalHot-air stove- combustion chamber opening H x W (cm): 90 / 64- Flue pipe connection:top / rear- Efficiency (%): 85,2- Log length (cm): 55- Minimum flue draught (Pa): 16- Ash box: No- BimSchV stage 2: Yes- Brown coal briquette: No- CE mark: Yes- Total output (kW): 26- Room heating capacity (m³): 1000- Window (cm): 34,5 x 22- Weight (kg): 193- Wood consumption (kg/h): 6,5- Exhaust gas throttle flap: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 120 mm- Dimensions H x W x D (cm): 90 / 64 / 110- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 229- Exhaust gas mass flow (g/s): 18.5- Combustion chamber H x W x D (cm): 50 x 55 x 55- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100109 Tedpfxovwfz Ao Adljf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Todpfx Aevz Hqyjdlef Weight 1400 kg Total power requirement 4,5 kw

Condition: new, Heating capacity 30 kW Dimensions (L/W/H) 105 cm x 60 cm x 147 cm cm - NEW -Kanuk Turbo 2 *new look*hot air stoveincl. heat exchanger and hot air blowernominal heat output 30 kWdimensions 105 cm x 60 cm x 147 cmheatable room volume 1000 m³log length 80 cmefficiency 82,4 %flue pipe connection 150 mmitem no. 2100006 Tjdpfjvxa Itox Adlof

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Tjdjvz Hqtepfx Adlof

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Tjdpfxjvz Hqmo Adlsf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1700x2550 mm Weight 1200 kg Total power requirement 2 kw Todpfx Adovz Hqgslef

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Todovz Hhxopfx Adlof Weight 650 kg Total power requirement 1,05 kw

Condition: used, Year of construction: 2013, Fully functional. Can be directly integrated into the heating circuit. Tjdjxxlzhspfx Adljf

Condition: used, mileage: 97,000 km, power: 55 kW (74.78 HP), gearing type: mechanical, first registration: 02/2018, Equipment: second-hand vehicle warranty, ford transit courier sport 1.5tdci 75hp Year built: 02/2018 Mileage: 97,000 1st owner Engine: 1.5tdci 75hp euro6 Tjdpjqy Iqmefx Adlof Color: Black Options: airco navigation rear camera Seat heating Multi-steering cruise control power windows electric mirrors cenrtal locking rear parking sensors radio / bluetooth Fog lights Tow bar armrest etc. Price: 13,500 euros + vat = 16,335 euros all-in Approved for sale + carpass. Major maintenance. 1 year warranty. More info

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Tedpfxjxzg Sao Adlef

Condition: as good as new (ex-display), We have two identical units, these were designed to blow the water off pouches and ready meal trays which had been through retorts. Could be used to remove water from other wet packed products. Bought new in 2016 and only used for trials. Todpfxou Infcj Adlof

Condition: good (used), functionality: fully functional, • Model: Legi-Air LA404Z-LH-500-112 • Machine type: Automatic labeling and print & apply system • Typical application: Product, carton, and pallet labeling • Features: - Print and apply labels in a single step (Print & Apply) - Precise label positioning at high speeds - Variable label sizes and layouts • Equipment: - High-performance print module (model-dependent: Zebra / Sato / Intermec) - Automatic applicator arm (LH 500–112 Series) - Sensor and safety technology • Benefits: Tsdpfsx Aid Uox Adlsf - High reliability for 24/7 industrial operation - Fast label changeover - Compatible with ERP / production lines • Application areas: Logistics, packaging, food, pharmaceuticals, industry • Condition: Standard machine

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames Tjdpfxexzg Rvo Adljf incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm