Used Hq 400 B for sale (52,838)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Kdodpfshm Sltox Addog Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Kdodpfehm Slpox Addjg Delivery with our own fleet (without unloading)

Condition: good (used), Included in the delivery: 01x U-shaped collision protection corner, used Kdjdpfxsw Dy Ivs Addeg Material color: orange Total height: approx. 400 mm Total width: approx. 220 mm Total depth: approx. 250 mm Number of mounting holes: 03 pcs. Hole diameter: approx. 15 mm Material thickness: 6 mm Weight per item: 10.87 kg Note: L-shaped brackets are welded to the sides. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which may be quoted separately depending on the delivery location and quantity.

Condition: good (used), Included in delivery: 01x storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Ksdsw E E Hgepfx Addjdg Internal dimensions: 560 x 360 x 167 mm Opening: front half open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: red Weight / piece: 1.57 kg General information about the item: This item is available for collection only. If transport or shipping is required, additional costs will apply. These costs can be provided separately depending on the delivery location and volume.

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Kjdpfxjw E D Iis Addedg Colour: blue Weight per unit: 1.59 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). Ksdpfxjw E Ixrs Addsdg General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm Kedpjya Hgpsfx Addsdg - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: used, mileage: 378,132 km, power: 291 kW (395.65 HP), first registration: 03/2017, fuel type: diesel, overall weight: 23,900 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,420 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Large cab, manual gearbox, differential lock, trailer hitch, air conditioning, auxiliary heating, roof hatch, radio-CD, navigation, reversing camera, lift axle, telescopic skip loader Hyva Lift NG 2015 TA XL with automatic safety net for containers (mfg. 12/2015). Vehicle sold without container! German vehicle from first owner. Ksdex Sgmnspfx Addodg

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Ksdsvy Iukepfx Addsdg Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg Kedpfxsb A If Te Addedg

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system Kdedpfei Ri Daox Addsg 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized

Condition: used, mileage: 142,843 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Make of engine: Iveco Axle configuration Tyre size: 315/80R22,5 Suspension: leaf suspension Kdodpfx Ajucz Htjddeg Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 15.628 kg Carrying capacity: 16.372 kg GVW: 32.000 kg

Condition: used, mileage: 131,909 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Applicable material: Concrete Kjdpjuc D Exefx Addjdg Tyre size: 315/80R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Drive: Wheel GVW: 32.000 kg

Condition: used, Conveyor belt, trough belt conveyor, trough conveyor, presumably GASUS type FB 400 x 5500 Belt conveyor, transport belt, belt conveyor Factory number: F Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Return roller diameter: 225 mm Return roller width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Driven by tube motor Kdsdohz U Azspfx Addeg - Infeed hopper 600 x 400 mm - The idler stations are two-part, troughed - Metal carrying rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular steel frame - Removable cover plate above the belt - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: good (used), Year of construction: 2015, LVD PPEB 400 - 61 press brake, Year of manufacture 2015, Control CNC LVD, Working length 6100 mm, Pressure force 4000 KN, Column clearance 5050 mm, Stroke 300 mm, Distance table - ram 570 mm, Thrust 400 mm, Table width 200 mm, Max. table load 2500 KN/m, Closing speed 100 mm / sec, Kdodpjvrd Tysfx Addeg Working speed 11 mm / sec, Return speed 120 mm / sec, Machine weight 37,000 kg,

Condition: new, Year of construction: 2022, functionality: fully functional, Offered is a shell-and-tube heat exchanger from INNEX Wärmetauscher GmbH, year of manufacture 2022. It is currently not in use and is fully operational. The safety features comply with the latest standards. Kedpsxc Euvofx Addjdg Technical data: Tube side Medium: Water Max. permitted pressure: 0–6 bar Max. permitted temperature: 0–100 °C Shell side Medium: Thermal oil Max. permitted pressure: 0–10 bar Max. permitted temperature: 0–320 °C Manufacturer serial number: H5596 An inspection of the machine is possible upon request and by arrangement.

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm weight 1200 kg PLC control with “bridge breaker” in good condition in good working order + Shuttle conveyor belt “GEA” Type SHC 1000/600 all stainless steel adjustable speed mobile infeed belt width 600 mm Kjdpfox Eii Rjx Addjdg outfeed width 1.000 mm overall dimensions (l x w x h) : 2.700 x 800 x 1.100 mm

Year of construction: 1969, condition: used, Swivel bending machine Albert steel TYpABK 400 /5 useful length 2530 mm Sheet thickness 5 mm Kedpfx Adjh Rkh Dedodg

Condition: used, mileage: 764,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 52 m³, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: ABS, air conditioning, tail-lift, Iveco Stralis 400 Refrigerated Box Carrier Retarder Tail Lift Euro 6 Internal Ref. No. for inquiries: 1125886 * Condition: very good * Power: 400 HP / 294 kW * Engine displacement: 8,710 cm³ * Retarder * ABS * EBS * Rear axle differential lock Kedpexzwahefx Addedg * Emission standard: EURO 6 * Electrically adjustable and heated exterior mirrors * Electric windows * Air-suspended comfort driver's seat * CD radio * Transparent sun visor * Roof spoiler * Side storage box right / plastic * Work lights Tail lift: Bär, load capacity up to max. 1,500 kg Body: Refrigerated box * Body manufacturer: Lamberet * Refrigeration unit: Carrier Supra 1250 Mt° Loading area dimensions: Length: 8,250 mm, Width: 2,500 mm, Height: 2,500 mm Tyres: Front axle: 315 / 70 R22.5 leaf-sprung / 35% Rear axle: 315 / 70 R22.5 air-suspended / 45% ----Price: €23,900 + 19% VAT. For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French and ????? Subject to errors, mistakes, and prior sale.

Condition: used, Technical details: cutting diameter: 280 mm saw band length: 3660 mm saw band width: 25 mm Ksdpfeu Nih Iex Addjdg Cutting height: 280 mm application:: Metallsägearbeiten cutting width: 400 mm cutting speed: 35 - 70 stepless m/min machine weight approx.: K.A. kg dimension machine xH: 1,4 x 1,8 x 1,2 m robust and accurate automatic band saw miter cut possible incl. roller conveyor with access approx. 6000mm and exit 3700mm *

Condition: ready for operation (used), Bosch BA 400 Euro Module PCD 52 DP DC-DC Converter, used, 100% functional Kdsdpoi D T Tpefx Addsg

Condition: ready for operation (used), Agie MJG 2132 B 614400 B card , used, minor signs of wear, 100% functional Kodpfxji D Tw Ej Addodg

Condition: ready for operation (used), Jahns ARH-0-GM76C002-PPH-R2-400-LG600 engine with Stöber C002F0175D63K4 gearbox, serial no. according to photo,used, normal traces of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdedsi D Ixcepfx Addog

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, cutting width (max.): 25 mm, type of input current: three-phase, total length: 650 mm, total width: 900 mm, total height: 990 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 990 mm, space requirement length: 650 mm, space requirement width: 900 mm, Orb 400 circular knife machine stainless steel version, Knife reground and coated manual operation via rotary control Slice thickness adjustable from 3 - 25 mm Dimensions: 900 x 650 x 990 mm, WxDxH Bread dimensions max: 360 x 280 x 160 mm L x D x H DGUV V3 tested Kjdoiitqhjpfx Addjdg Machine mobile with lock Connection 400V, 16A-CEE plug Used machine cleaned and checked Visit our large bakery machine park!

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec Kedpfexp Nfxsx Addedg FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS