Used Hungary for sale (740)

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Center height: 400 mm Swing over bed: 815 mm Swing over cross slide: 480 mm Swing in gap: 1000 mm Length of gap: 300 mm Distance between centers: 3000 mm Speed range: 5.6 – 1120 rpm Number of speed steps: 24 Tool cross-section: 40 x 40 mm Spindle bore: Ø 72 mm Bed width: 490 mm Tailstock sleeve taper: Morse 5 Tailstock sleeve travel: 250 mm Metric threads: 0.5 – 48 mm (35 steps) Inch threads: 48 – 7/16 TPI (42 steps) Module threads: 0.25 – 24 Module (30 steps) Diametral Pitch threads: 96 – 7/8 D.P. (42 steps) Circular Pitch threads: 1/16" – 3" C.P. (29 steps) Dimensions (LxWxH): 4860 x 1360 x 1555 mm Weight: 4600 kg Accessories and Equipment: - 2-axis digital readout (DRO) - 3-jaw chuck - Steady rest - Machine lamp - Coolant system - Rapid traverses - Chuck guard - Manual on hungarian Dcedpfx Aljy N Rg He Nsh - Original mfg cca. 1980 Condition:The lathe is completely overhauled. Available immediately.

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Dcjdpfx Ajyly R Ejl Njh Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: good (used), functionality: fully functional, UDKP100 Multi-Blade Circular Saw Dodpfx Aoxbrutel Njch - 37kW motor power - Max. cutting height: 100mm - Max. cutting width: 300mm - Max. working width: 450mm - Saw blade diameter: 250-300-350mm - Working speed: 40m/min - Chain conveyor feed - Manual saw blade height adjustment - Extra thick steel frame, shaft made of specially alloyed, hardened and ground steel - Manual blade height adjustment depending on the selected saw blade diameter - Large set of spacer rings included - Price ex location Hungary Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, controller model: Siemens Sinumerik 828D CNC, TECHNICAL DETAILS Djdpfx Aezap Dwol Nech Travel range X-axis: 760 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle taper: SK40 Spindle speed: 10,000 rpm Feed rate: 10,000 mm/min Table size X: 900 mm Table size Y: 410 mm Max. workpiece weight: 350 kg Number of axes: 3 MACHINE DETAILS Control system: Siemens Sinumerik 828D CNC Tool changer: 24-position Drive power: 12 kW Tool cooling through the spindle: 30 bar EQUIPMENT Renishaw measuring probe

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Table size X: 550 mm Dcsdpfxezapylj Al Njh Table size Y: 470 mm MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: new, Year of construction: 2024, GG 015 EURO 5 The new Günter Grossmann GG015 compact loader. The loader Günter Grossmann GG015 (1500 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very fine. The control panel is very nice and clear. The cab is soundproofed, insulated, equipped with heating, very comfortable and nicely glazed which allows working safely and comfortably. The machine has a very durable construction. The machine is equipped with a quick coupler, which allows accessories to be changed quickly without leaving the cab. Additional equipment: 4 in 1 bucket, alligator grapple, alligator grapple for trees, straw or silage. We are the largest dealer in Poland, Czech Republic and Hungary. We have all spare parts for our branded machines. GG015 loader + bucket + pallet forks + quick coupling Specification Model GG015 Engine Xinchai euro 5 Engine type: Inline, water-cooled four-stroke diesel engine Rated output: 36.8KW -( 50hp ) Rated speed: 2200 rev/min (rpm) Steering: Fully hydraulic Pressure in the system: 1.2 ~ 1.5 MPa Brake One hydraulic brake on four wheels Parking brake: manual Dsdpfx Aleu Dcgye Njch tire 12-16.5 Wheelbase: 2100 mm Track: 1720 mm MAIN DIMENSIONS Overall length (bucket on ground): 5200 mm Overall height: 2730 mm Overall width: 1540 mm RANGE Bucket capacity: 0.7 m3 Bucket width: 1750 mm Max. breaking force: 36.8KN Capacity: 1500 kg Machine weight: 3550 kg Driving: Four-wheel drive Min. Turning radius: 4500 mm Unloading height: 2650 mm Drive system: Hydraulic transducer

Condition: as good as new (ex-display), 9pc Electric motor (Brand new), LAMMERS 1.5 kW (2 HP) Three-phase Electric Motor – 2890 rpm, IE2 premium efficiency (New), Used machine Overall dimensions: Width: 330 mm Depth: 180 mm Height: 250 mm Shaft size: Ø 24 x 50 mm Manufacturer: LAMMERS (Germany / Lammers.hu) Type: 9AA90S02 Power: 1.5 kW (2 HP) Speed: 2890 rpm (50 Hz) Voltage: 230/400 V (Δ/Y) Current consumption: 5.3 / 3.05 A Efficiency: IE2 (81.3%) Protection rating: IP55 Insulation class: F Design: IM B34 (foot + flange mounted) Dodpjzbqrfjfx Al Noch Flange size: FT115 Weight: approx. 14–15 kg

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Dcsdpfx Aozbqp Del Njh Depth: 2150 mm Height: 3900 mm Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: used, Bega Screw Compressor 15kW 10 bar, Refrigerant Dryer, Compressed Air System, Compressor Station, Air Supply System, Used Machine Compressor Manufacturer: Bega Type: MSK SD15/10 /U3 Year of manufacture: 2017 Weight: 500 kg Overall dimensions: 1300 x 950 x 1150 mm Flow rate: 2.1 m³/min (2100 l/min) Maximum pressure: 10 bar Motor power: 15 kW Maximum speed: 2940 rpm Country of origin: Germany Dryer Manufacturer: BEGA Kompresszor Kft. (Friulair S.r.l.) Type: ACT23/AC Year of manufacture: May 2017 Overall dimensions: 500 x 420 x 950 mm Nominal capacity (Flow rate): 2300 l/min Maximum operating pressure: 14 bar Voltage / Frequency: 230 V / 50 Hz Power output / Rated current: 0.46 kW / 2.8 A Refrigerant type / mass: R134a / 0.35 kg Country of origin: Italy Air Receiver Tank Manufacturer: Huch GmbH Behälterbau (Neuruppin, Germany) Type / Serial No. (Herstell-Nr.): 103455 Year of manufacture: 2002 Overall dimensions: 2000 x 615 mm Nominal capacity: 500 Liters Max. allowable operating pressure: 11 bar Max. allowable operating temperature: -10 to +50 °C Standard / Certification: EN 286 Teil 1, CE 02-0035 Djdpszbqn Tofx Al Nsch Country of origin: Germany

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Dodpfeyr Ihrjx Al Njch Height: 1770 mm Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: used, Stackable Storage Pallet, Long Material Cradle, Used Equipment Manufacturer: Alba Metál Alpin Kft. Year of Manufacture: 2017 Load Capacity: 2000 kg Technical Specifications: Overall Dimensions (External): 6000 x 1400 x 750 mm Dodpfoy Ayd Iox Al Njch Usable Dimensions (Internal): 6000 x 1230 x 610 mm Weight: 510 kg

Condition: used, Mounting Table, T grooved worktable, Welding table, T-slot table,T-slot plate,Used Machine Overall dimensions: 4020 x 1720 x 410 mm Groove dimension : 65x55 mm Djdpfx Aloy A N T Ss Njch

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Voltage: 380 V Dcjdpfxjy E Twao Al Nsh Electric power: 1,5 kW Weight: 378 kg

Condition: ready for operation (used), Chip Conveyor, Screw Conveyor, Double Screw Conveyor, Used Machine Manufacturer: Ventilatorenfabrik Oelde GmbH Overall dimensions: Width: 9460 mm Depth: 1340 mm Height: 2300 mm Trough dimensions: 8830 × 900 × 340 mm Djdpoy H I Uiefx Al Nech Feed opening: 1230 × 1200 mm Discharge opening: 730 × 535 mm Electrical data: 400 V Double screw conveyor system.

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Manufacturer: Baltimore Aircoil International Dsdpfx Asyfnulol Nech Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol

Condition: ready for operation (used), Chain Hoist, Rema Star 111/54, 4 Meters, 3200 kg, Used Machine Manufacturer: Rema Model: Star 111/54 Overall Dimensions: Dcedpfx Aloxxkw Is Nsh Width: 710 mm Depth: 360 mm Height: 460 mm Electrical Data: 380V; 4.4 kW; 10.5A Load Capacity: 3200 kg Lifting Height: 4 m Year of Manufacture: 2008

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Dsdpsyyhqdofx Al Nsch

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm Dcodpfx Alsy Ayc Dj Noh The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: used, Pump, Wilo IPL50/175-7.5/2; 7.5 kW; Used machine Manufacturer: Wilo Type: IPL50/175-7.5/2 Overall dimensions: Width: 270 mm Depth: 380 mm Height: 670 mm Electrical data: 400V; 13.6 A; 7.5 kW Maximum pressure: 10 bar Dedpfoy Ezb Tox Al Njch Fluid temperature range: −20 °C … +120 °C Maximum flow rate: approx. 69 m³/h Maximum delivery head: approx. 38 m

Condition: used, vacuum lifter units, Manufacturer: Fezer Type: RC 0010 B 5Z1 Vacuum: 20 mbar Overall dimensions: 720 x 600 x 570 mm Weigth: ~30 kg This includes a flash pad : 4 pieces Dcedjy E Twtjpfx Al Nsh Max lifting capacity: 65 kg/ pc /pad

Condition: used, Manufacturer: Jászberényi Aprítógépgyár Type: PE VI Orifice: 600x350 mm Max size of the delivering size: 550x300 mm Outlet size: 30-80 Power of motor: 22 kW Weight with motor: 6,6 tons Dsdpfjy Ayb Hjx Al Nsch Overall size: L=2338 mm x W= 1655 mm x H= 1820 mm Detailed technical specifications are shown in the attached photos. The equipment is currently in disassembled condition. It is offered exactly as shown in the pictures. All components are available and the machine can be fully reassembled.

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Dcjdpfxsy D Uhdj Al Noh Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: ready for operation (used), Hydraulic lifter 1000t, hydraulic cylinder, hydraulic power unit Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Weight : 850 kg Year : 2017 Overall dimensions : 1240 x 770 x 1560 mm Performance : Dcedpfjx Da A Djx Al Neh 350 bar, 11 kW, 2800 l/min Lifter Manufacturer : Schiess Defries Type : 172 | 18442168 Pressure : 450 bar Stroke : 150 mm Load capacity : 1000 t

Condition: ready for operation (used), Hydraulic power unit, 350 Bar, used machine Dcsdjxxixqspfx Al Nsh Manufacturer: Bucher Hydraulics Type: QX24-008R ; PHHET Overall Dimensions: Width: 1260 mm Depth: 800 mm Height: 1560 mm Weight: 620 kg Year of Manufacture: 2017 Electrical Data: 3×400V / 230V, 50Hz, 11 kW Operating Pressure: 350 bar

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Dodpfxsy Ezapo Al Nsch Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: FilterStufe2 L1020/300/2 – 4 pcs HEPA LH 1020/1 – 2 pcs