Used Hydraulic C Frame Press for sale (73,640)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Gedpfoy Uiyvex Ad Roui Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, HUMARD 001-001/84 is a Hydraulic press designed for precision, high accuracy and reliability. Working capacities: Pressure 125 to; Shearing force 20 - 1250 kN; Total stroke 0 - 130 mm; Max. stroke 8 mm/s; Oil quantity 80 l. Main specifications: Voltage 50 Hz 3x: 400 Volt; Total power required 11 kW; Machine weight about 2100 kg; Dimensions LxWxH 1300 x 1100 x 2400 mm. Built to achieve tight tolerances; suitable for automotive, machine tools, aerospace and medical applications. Gsdpfxo Ai R Uro Ad Rjui

Condition: good (used), functionality: fully functional, Robust hydraulic press, type HES 16MP, manufactured by Hydraulische Pressen und Maschinenbau GmbH (HYPREMA). Depending on the tooling and permissible load, the machine is suitable for typical pressing and straightening operations, such as aligning, pressing in, and pressing out components. The model designation HES 16MP indicates a nominal pressing force of approximately 16 tons. The installed pressure gauge has a display range up to 25 MPa (25 tons). Model: 7092513 Type: HES16MP General: - Pressure gauge display, pressing force: 0–25 MPa (0–25 tons) - Pressure gauge display, hydraulic pressure: 0–400 kp/cm² (approx. 0–392 bar) Gujdjumk Naepfx Ad Rsi - Design: Hydraulic single-column press - Operation: Hand lever actuation

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Gsdpfx Aewhcmpod Roui Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: good (used), For sale: HESS frame press pneumatic, retrofitted with pressure booster control Guedj Af Humspfx Ad Roi max. press length approx. 355 cm in good condition, from a small carpentry workshop.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 30065320, functionality: fully functional, power: 14.71 kW (20.00 HP), pressing force: 50 t, stroke length: 500 mm, operating speed: 63 mm/s, reverse speed: 350 mm/s, table width: 500 mm, table length: 800 mm, throat depth: 250 mm, distance table to ram: 650 mm, oil tank capacity: 235 l, total length: 920 mm, total width: 1,420 mm, total height: 3,100 mm, Equipment: CE marking, documentation/manual, 50-ton swan-neck hydraulic press by Benedetti in excellent condition. Machine available for immediate sale and can be viewed at our workshop in Peschadoires, France. The press is equipped with a new electrical control panel and has a CE marking. A technical file will be provided with the machine. Gujdpfo Ahxqvsx Ad Roi Please find attached photos of the press and the technical data sheet. Price upon request.

Condition: good (used), Year of construction: 1979, functionality: unexamined, pressing force: 40 t, overall weight: 5,000 kg, Equipment: safety light barrier, SHC 40 Hans Schoen Gjdpfx Aoz S E S Ssd Rjui

Condition: used, Year of construction: 1991, pressure 60 t passage width 1000 mm stroke 600 mm table-size 990x400 mm table height over floor 600-900 mm working pressure 300 bar oil volume 60 l total power requirement 1 x 5,5 / 1 x 7,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1250 x 1000 x 2450 mm Features: - Two-hand operation - Emergency stop Gsdpfs Ai Udxox Ad Rsui - Depth adjustment via limit switches - Pressure preselection - Work table with 3 T-slots - Rear protective screen with mesh - Work area light - Machine feet

Condition: used, Throughput capacity: approx. 50-75kg/h, motor power: 5.5kW, on-site inspection is possible. Gusds Akd Svspfx Ad Rsi

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. This is a robustly built machine, equipped with: • Work table with wedges and support pieces, as seen in the photos. • Control panel with analog gauges. Godpfx Ado Aggbuj Rsui • Separate hydraulic unit with a Siemens motor. • Protective housing around the work area.

Condition: used, Colour: Green Empty weight: 8.000 kg - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 Gusdpfx Adszxhxie Rei - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-works: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons 4 guide bolts of the upper ram are broken. These would need to be unscrewed and replaced. Guedpfj Aa Ii Iex Ad Roi Apart from that, the machine is in perfect working order. Price: EUR 2,000.00 plus VAT, ex-works.

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Gedpfe Agxfgsx Ad Reui Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: good (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: Darley Model: 100 3100 Year of manufacture: 1995 Control system: DR 23 Max. bending force: 100 tons Max. working width: 3100 mm Axes: Y1 and Y2, X1 and X2 Back gauge: 1500 mm Guedpfx Ade Ahwkkj Rsi Front gauge: 1300 mm SIK safety device Full-length tooling We can send a video via WhatsApp if we have a phone number.

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, pressing force: 1,600 t, stroke length: 1,600 mm, oil tank capacity: 3,500 l, total height: 6,900 mm, overall weight: 72,000 kg, Engines: Main engine approximately 55 kW, 2 HD pumps each approximately 4.5 kW. Gujdpfxs Aibbto Ad Roi

Condition: good (used), Year of construction: 1994, Pressure: 250 t Gjdps Ait Edofx Ad Roui Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping Guedpfx Asfthzkjd Rsi - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Working width: 3000 mm Working height: 2000 mm Gujdpfx Adsz Sd Dbo Rei Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: a window and door pressing machine, model Junior, manufactured by the Italian company Casolin. Bale pressing machine. Working area: 3000 mm (width) x 2500 mm (height). The machine is in good working order. We have the instruction manual in English. Gedpfxszzn Dwe Ad Rsui Export price – domestic price + VAT. Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Gsdpjzk Nwkofx Ad Reui Availability: by arrangement Location: Röllbach

Condition: reconditioned (used), Working width 3550 mm Working height 2550 mm Number of cylinders 5 St. Hess Quickstep Frame Press ----- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) ----- General ----- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: ----- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) > Horizontal adjustment method: Electro-hydraulic Gujdpfez S N Htox Ad Roi > 1 Intermediate pressure beam > 1 Small-dimension spacer/insert > 3 Pivoting pressure plates ----- (Technical specifications provided by the manufacturer – no guarantee!) Images show the same model. Original photos not yet available.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm Guodpfx Adszp Ex Uo Roi - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm Gedpfx Ads Ad Rlms Rjui stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Fabricated construction with light guard and two hand switch.

Condition: good (used), functionality: fully functional, PYE 100 S/1M hydraulic press Guodpfx As Afbvljd Rsi

Condition: used, Year of construction: 1992, power: 17 kW (23.11 HP), pressing force: 40 t, stroke length: 500 mm, Hydraulic Press Manufacturer: HYDRAP Type: HP SK 40 Year of manufacture: 1992 Technical details: Pressing force: 40 t Gsdpfjzdvcaex Ad Reui Effective stroke: 500 mm Drive power: 17 kW Overrun distance: 48 mm Overrun time: 110 ms Safety distance: 176 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.