Used Hydraulic Pipe Bender for sale (17,416)

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Parker, hydraulic pump Kodpfxox Swzcs Ahzswt -Type: 730-0080 -Drive shaft: Ø 22 x 35 mm - universally applicable -Hole: Ø 13 mm / Spacing 106 mm -Dimensions: 233/133/H135 mm -Weight: 13.1 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder, tie rod cylinder, tilting cylinder -Hydraulic cylinder: double-acting, stroke 175 mm -Type: unfortunately without a type designation -Piston rod: Ø 30 mm -Hole: Ø 20/16 mm / Retracted distance 325 mm -Dimensions: 365/70/H130 mm Kodpex Sww Rsfx Ahzewt -Weight: 5.5 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures Kjdpfxov Auxuj Ahzswt -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: excellent (used), mileage: 319,386 km, power: 191 kW (259.69 HP), first registration: 11/2001, fuel type: diesel, tire size: 315/60-R22.5, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 5,750 mm, total width: 2,500 mm, Year of construction: 2005, Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, fog lights, power assisted steering, power mirror, traction control, trailer coupling, = Additional options and accessories = Kedpjx Uqa Rjfx Ahzowt - 2-pedal control - Aluminum fuel tank - Leaf suspension - Power brake booster - Differential lock - High beam - Speed limiter - Cabin - Air suspension - Radio/CD player - Sun visor - Stability control - Pre-heating system - Power take-off (PTO) - Central lubrication - Towing hitch = Notes = 2005 Volvo FM9-260 4x2 with hydraulically adjustable fifth wheel (brand: ESTEPE), side access on both left and right, only 319,386 km, automatic transmission, Euro 3 emission standard, trailer coupling, tachograph (older model), radio/CD, front tires 315/60-R22.5 (tread depth left: 10 mm, right: 10 mm), rear tires 315/60-R22.5 (tread depth left inner/outer: 10/9 mm, right inner/outer: 10/9 mm), chassis number: YV2JHC0A25A597117, Dutch registration with valid main inspection (APK) until 22.05.2026 = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: Volvo, automatic Axle Configuration Tire size: 315/60-R22.5 Brakes: Disc brakes Front axle: Max. axle load: 6,700 kg; tire tread left: 60%; tire tread right: 60%; suspension: leaf springs Rear axle: Twin tires; max. axle load: 11,500 kg; tire tread left inside: 55%; tire tread left outside: 60%; tire tread right inside: 55%; tire tread right outside: 60%; suspension: air suspension Weights Unladen weight: 6,610 kg Payload: 11,590 kg gross vehicle weight (GVW): 18,200 kg Functional Body manufacturer: Volvo Maintenance, history, and condition APK (technical main inspection): valid until 05/2026 Technical condition: very good Visual condition: very good Identification Registration number: BP-VG-55 Further information Please contact Arne Honingh for further information.

Condition: used, mileage: 279,000 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, total height: 3,960 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, parking heater, spoiler, = Additional options and equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Roof spoiler - Differential lock - Remote central locking - Windscreen - Speed limiter - Tipping hydraulics - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Stability control Kwodpfex Uq U Ijx Ahzst - Parking heater - Pre-heating system - Xenon lighting - Power Take-Off (PTO) = Further information = Maximum front axle load: 8,000 kg Rear axle: Differential lock; Max. axle load: 11,500 kg Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 8,355 kg Payload: 12,645 kg Gross vehicle weight (GVW): 21,000 kg Please contact Bastien Begemann or Corne Visser for further information.

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 -Dimensions: 1230/680/H640 mm Kwsdpfex Srlpsx Ahzst -Weight: 419 kg

Condition: new, punching pressure 28.0 t Kwjdpfx Ahjw U U S Nszot punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, color: other, first registration: 03/2010, Year of construction: 2010, Serial number: 11.15.349.0057 We have a stock of >100 axles. Kjdpowxv Nfofx Ahzowt Please contact us if you can't find what you are looking for.

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed Kwsdpfei A S I Djx Ahzst adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator Kwodpfx Ahsi A S I Ijzjt - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg Kwodeivqrbopfx Ahzjt - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min Kwsdpew S Nknsfx Ahzot total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW Description: Kjdpfexcuhlsx Ahzjwt Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec Kedpfx Ajxcuicohzjwt including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Kjdpst I D Thofx Ahzewt Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: used, Year of construction: 1983, sheet width 3050 mm plate thickness 6,0 mm distance between columns 3000 mm cutting angle 0,5 - 3 ° no. of strokes 9 / 14 Hub/min down holder 18 Kwodpfx Aevxlpijhzjt total power requirement 10 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm Kwodoi Db Erspfx Ahzjt table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: used, Year of construction: 2012, sheet width 3100 mm plate thickness 16 mm distance between columns 3400 mm cutting angle 2,5 ° work height max. 900 mm rear stop 1000 mm down holder 14 Stück Control CYBELEC CYB TOUCH 6 oil volume 500 l no. of strokes 10 Hub/min total power requirement 30 kW weight of the machine ca. 16400 kg dimensions of the machine ca. 4150 x 2360 x 2450 mm Features: - Electric rear stop 1000 mm - Electric cutting gap adjustment - Electric cutting angle adjustment Kjdpfxjwli Nfs Ahzswt - Cutting length limitation - CYBELEC CybTouch 6 control - Light barrier behind the machine - Finger protection at the front - Ball rollers in the support table - 1x side stop - 2x front support arms - Foot switch

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: Kwedpfx Aheuagxpjzjt - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm Kwjdpfoxcuhrox Ahzjt bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec Kjdpfji A S I Sjx Ahzjwt work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 mm total power requirement 5,5 kW weight of the machine ca. 1300 t dimensions of the machine ca. 3500 x 1250 x 1300 m Description: Kjdot I D Uxepfx Ahzewt Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) Kwsdpfxstt Ecde Ahzst 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg Ksdpot Sykqefx Ahzswt dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 750 mm - Pneumatic sheet metal holders - 2x side stops - 3x front support arms - Ball rollers in the front support table - Rear sheet metal chute - Foot switch

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Kwjdpfexcuiisx Ahzst Mandrel is no longer available, can be retrofitted