Used Hydraulic Wedge for sale (14,404)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Hodpfx Aasyizxrsdsfc Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Control: Conventional - Table width: 500mm - Throat depth: 350mm - Table length: 740mm - Ram width: 250mm - Ram length: 250mm - Model: Hydraulic - Max. stroke: 250mm - Power: 100.0ton - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfsdpfx Aaex N Sxdsdsc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch press for Schüco tools, hydraulic press, multi-function punch press, punch press, universal punch press, punching machine -Handover: in its current condition as inspected -Condition: Cylinder slightly leaking -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Protrusion: 330 mm -Operation: Hand lever Hodpfjw A Rzdox Aadefc -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, LVD Shear Type HSL 40/12.7 Capacity 4x12 mm Year 1991 Weight 14,000 kg Hodpfsykk Acjx Aadefc

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available Hodpfx Aeyi Acfsadjfc -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Hfodsyiz Nwopfx Aadec -Hydraulic power unit: with hydraulic reservoir, mobile -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information Hodpfx Ajw N Su Doadofc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Hfodpfxsw N St He Aadjc - Operating hours: 0 - Control: Conventional - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No Hedpfx Asxywkqsadsfc - CE certificate present: No - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total height: 2,700 mm, total width: 2,550 mm, total length: 1,350 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Control: Conventional - Motor power: 20.0kW - Table width: 525mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 200mm - Power: 63.0ton - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hsdpfx Aex Ad Hkeadsfc Lukas van Rossum

Condition: used, Year of construction: 1990, pressure 500 t weight of the machine ca. 5 t Hfsdpjykb Ivjfx Aadec

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Hfsdpfxeygd Auj Aadec Throat Depth 500mm

Condition: ready for operation (used), controller manufacturer: Cadman-B Touch, throat depth: 400 mm, installation height: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, power: 42 kW (57.10 HP), travel distance Z-axis: 200 mm, empty load weight: 24,000 kg, passage width: 5,050 mm, table width: 120 mm, 9 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 / V 4 plaatsteunen aan de voorkant laserkluisbeveiliging Willa-gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Locking speed: 120 mm/sec Hjdpfx Aaoyhibxjdjfc

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, power: 11 kW (14.96 HP), empty load weight: 17,500 kg, workpiece length (max.): 6,200 mm, passage width: 6,400 mm, throat depth: 60 mm, Inclusief één frontplaatsteun van 6 meter. Hfedsyhib Espfx Aadsc Strokes/min: 10 > 465 str/min Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0°

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Hfjdpfxsxwmycs Aadec Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment Hjdpfx Ajxwmv Deadofc cutting angle adjustment

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 working width 8100 mm maximum sheet thickness 6 mm motorized backgauge automatic blade gap adjustment automatic cutting angle adjustment Hsdpfx Ajx Rbhdeadsfc sheet support device

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop • Support arms • Manual rear gauge 400 mm All details without guarantee. Hjdewtyqiepfx Aadsfc A demonstration is possible at any time in our showroom.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm Hfedpfsb A Rr Rex Aadsc -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Hsdexpuipepfx Aadjfc

Condition: refurbished (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Cybelec, controller model: Cybtouch 6, working width: 4,050 mm, Equipment: documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Adira Hydraulic Guillotine 6.5 mm x 4080 mm M/S. CybTouch 6 Controller. Go to Back Gauge. Auto Blade Gap. Pneumatic Rear Sheet Support. Rear Light Curtain. Hfedsyg Swmjpfx Aadec Can Load to Suitable Transport

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), total length: 4,000 mm, total width: 2,150 mm, total height: 2,200 mm, empty load weight: 7,700 kg, workpiece length (max.): 3,100 mm, electric backgauge, with digital readout Butée arrière escamotable Adjustable cuttingedge: 0,5 > 3° Hodpfx Aajygywzedsfc

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, power: 15 kW (20.39 HP), total length: 4,350 mm, total width: 2,300 mm, total height: 2,370 mm, empty load weight: 11,000 kg, workpiece length (max.): 3,100 mm, electric backgauge, with digital readout Strokes/min: 7 > 30 str/min Adjustable cuttingedge: 0,5 > 3° Hsdpjygyw Uofx Aadsfc Number of sheet holders: 17x

Condition: ready for operation (used), throat depth: 600 mm, installation height: 600 mm, operating speed: 7 mm/s, reverse speed: 46 mm/s, power: 44 kW (59.82 HP), travel distance Z-axis: 300 mm, passage width: 5,050 mm, table width: 300 mm, Twee kantbanken van 6 meter kunnen samenwerken om materiaal van 12 meter te buigen. Hjdpfx Aaeygyvkodefc Kantbanken kunnen volledig worden gedemonteerd, zodat ze in containers kunnen worden vervoerd. Capacity: 1200 ton x 12 meter Backgauge: CNC Locking speed: 80 mm/sec Electric motor (power): 2x 44 kW Weight: 124 ton (2x 62 ton)

Condition: ready for operation (used), sheet thickness steel (max.): 12 mm, power: 22.5 kW (30.59 HP), total length: 4,780 mm, total width: 1,750 mm, total height: 2,150 mm, empty load weight: 11,500 kg, workpiece length (max.): 4,100 mm, Haco TS 4100 x 12 mm CNC Strokes/min: 6 > 10 str/min Adjustable cuttingedge: 0,5 > 3° Hsdpfx Asygyxfoadefc Number of sheet holders: 23x