Used Hytec Zl 12 F for sale (52,955)

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. Hnsdpowgg D Aofx Ag Nsu The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: like new (used), functionality: fully functional, In this offer you purchase a used colour production system "Canon imagePRESS V1000 ’ from 12.2023 Hedsu Tqnuopfx Ag Nsnu Object of sale: 1 x Canon imagePRESS V1000 with the following equipment: 5212c003 - Canon Fixing Station V1000 5948c003 - Canon Resale Licence 5222c003 - Canon Booklet Finisher AF1 5214c003 - Canon Multi-Drwaer Paper Deck E1 5936c001 - Canon PrismaSync 5606c001 - Canon Duplex Colour Image Reader P1 5261c001 - Canon Operator Attention Light A1 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,686,664 pages Condition: This offer is for a used device which is in mint condition. The device has been fully tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible. Hedpfx Agjxny D No Nenu

Condition: like new (used), Treif Breadslicer 10/12/14MM Hjdpfx Agsumphbe Nenu

Condition: used, machine/vehicle number: 21241, - no description available - Hedop H S Auepfx Ag Nonu

Condition: used, Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you 100 used depth requirements of the manufacturer Nedcon to purchase. This depth Edition is suitable also for other manufacturers. Technical data to the depth requirement: Shelf system: Nedcon Type: NS In the scope of delivery included: 100xTiefenauflagen, used Material color: compl. zinc-plated f. stand depth: 800 mm Overall length: 800 mm clear span width: 710 mm C-Profilabm.: approx. 60 x 50 mm Traverse Edition: approx 40 mm Material thickness: 2.0 mm Weight / unit: 1,983 kg Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Hnjdpfx Ajdqkf Isg Neu Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: 01x shelf connector used Hodpfxsd Ttz Rj Ag Nenu material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Weight/pc: approx. 0.536 kg/pc. 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 02x washers, M8

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized total length: approx. 200 mm total width: approx. 80 mm opening dimension: approx. 42 x 37 mm (WxH) for rectangular tube: 40 x 35 mm hole spacing: approx. 50 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 3,00 mm weight/pc.: 0,320 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hsdpfxepbcfgo Ag Nonu General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Hjdpowl Ncfjfx Ag Nsnu Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are 04x shelf support, new Manufacturer: Mauser Material color: sendzimir galvanized material thickness: approx. 1,2 mm total height: approx. 43 mm total width: approx. 11 mm Weight/ pcs. approx. 0,008 Kg General information about the article: This item is offered for pickup only. A desired transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately Hodsh Iy R Hspfx Ag Nenu depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 1x used wooden plank Total width: approx. 2,470 mm Total depth: approx. 1,450 mm Clear span: approx. 1,340 mm for stud depth: approx. 1,450 mm Traverse support: approx. 55 mm Board thickness: approx. 20 mm Board width: 135 or 110 mm Weight per piece: 33.40 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Hjdpfx Agov U U I He Nonu Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank Hedpfogqa Rpox Ag Njnu We offer you here 10 used safety pins of the manufacturer Hovuma for sale. - incl. Shipping Germany-wide - Technical data of the safety pin: System: Hovuma Included in delivery: 10x safety pins, used material colour: compl. galvanized weight: 0,024 kg/pce. for securing the side members against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), The scope of delivery includes: 1x used wooden plank Total width: approx. 2,170 mm Total depth: approx. 1,450 mm Clear span: approx. 1,340 mm for stud depth: approx. 1,450 mm Traverse support: approx. 55 mm Board thickness: approx. 20 mm Board width: 135 or 110 mm Weight per piece: 29.38 kg Hsdpfx Agov U Tbfj Nonu Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm Hodpewwuchofx Ag Njnu for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), Scope of delivery includes: 01x Bracket for rear wall mesh, used Material color: sendzimir galvanized Diagonal length: approx. 405 mm Overall width: approx. 90 mm Overall depth: approx. 30 mm Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm Material thickness: approx. 3.0 mm Weight/piece: 0.660 kg Your contacts at our company: Hnjdpfxoww Alqj Ag Nsu Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this involves additional costs, which can be quoted separately depending on the delivery location and order scope.

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used Material color: orange Hjdpfepbbrmex Ag Nenu total length: approx. 130 mm total width: approx. 160 mm opening dimension: approx. 52 x 34 mm (WxH) for rectangular tube: 50 x 30 mm hole spacing: approx. 100 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 4,00 mm weight/pc.: 0,640 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Included in delivery are: Hnodpfoi Dr S Eex Ag Nsu 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.020 mm suitable f. depth of the bar: approx. 1.000 mm material thickness: approx. 2,40 mm clear span: approx. 880 mm U-profile dim.: 58 x 50 mm cross beam support: approx. 67 mm Weight/piece: approx. 2,870 kg General information about the article: This article is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank The scope of delivery includes 01x crash barrier, used Total length: approx. 2,575 mm Clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of each: 02x frame profile, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x Post, second-hand Hodpfx Aehputhog Nonu Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 80 x 10 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, functionality: fully functional, machine/vehicle number: 611878000050, Year of construction: 2004, operating hours: 10,478 h, load capacity: 1,200 kg, lifting height: 5,770 mm, fuel type: electric, battery voltage: 48 V, The scope of delivery includes: 1x Reach Truck Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Rated load capacity: 1,200 kg Rated drive power: N/A Maximum battery weight: 788 kg Battery voltage: 48 V Year of manufacture: 02/2004 Serial number: 611878000050 Maximum lifting height: approx. 5,770 mm Operating hours: 10,478.3 h Overall width: Tines (outer) approx. 850 mm Tine length: approx. 800 mm Battery age: 2012 Extendable depth: up to 630 mm Overall height: approx. 2,460 mm Overall width: approx. 1,250 mm Overall depth: approx. 1,700 mm Total depth with tines retracted: approx. 1,900 mm Total depth with tines extended: approx. 2,520 mm Battery charger, used Hnjdpewhb Skofx Ag Nsu Manufacturer: STILL Model name: ecotron memory 48V-70A Total width: approx. 550 mm Total depth: approx. 450 mm Total height: approx. 500 mm Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x depth bar frame, used Material color: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Cross beam support: approx. 50 mm Support bracket: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1,2450 - 1,070 mm Sloping at the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Hedpfx Agsr Dr Sus Njnu This is a used item, there may be scratches, dents and signs of use. This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which will be charged separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Included in delivery: 01x locking angle, used Material color: sendzimir galvanized leg ,,A" approx. 35 mm leg ,,B" approx. 53 mm (contact surface see description) incl. distance block (grey) inner dimension ,,C" approx. 22 mm material thickness: approx. 2,00 mm Weight / pcs.: approx. 0,120 kg Remark: Due to the included the Z-bracket can be used for various truss widths Hedepgndgopfx Ag Nenu crosshead widths from 40 - 60 mm! Brief overview / range of application: - Without block for truss width 60 mm (e.g. for INP) - With block (small side inside) for truss width: 50 mm (INP or box profile) - With block (large side inside) for crosshead width: 40 mm (INP or box profile) General information about the article: This item is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Included in delivery: 01x idler roller, II. choice Application: for roller conveyors Material color: sendzimir galvanized Material: steel Hjdpol Ex Tmofx Ag Nonu Type designation: MRT-50x1,5.20 Total length: 625 mm track width: 595 mm rollerØ: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt Hodpfx Agsn Tprns Nsnu or dirt may be present. Application: suitable for laid gratings for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here 10 used safety pins of the manufacturer Hovuma for sale. - incl. Shipping Germany-wide - Technical data of the safety pin: Shelf system: Hovuma Included in delivery: 10x safety pins, used Hedpfjgqa Ahex Ag Nenu weight: 0,006 Kg / pc. For securing the side members against unintentional lifting out Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here new shelf supports of the manufacturer META for sale. - incl. shipping Germany-wide - Manufacturer: META Type: META FIX + META CLIP Included in delivery: 12x shelf supports, new material colour: compl. galvanized material thickness: approx. 1,24 mm total height: approx. 53,60 mm total width: approx. 18,08 mm Weight/ pcs. approx. 0,013 Kg Our services at a glance: Hnedjgqa Iqspfx Ag Nsu (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)