Used Impact Mill for sale (10,842)

Condition: good (used), Year of construction: 2009, High-performance CNC turning and milling center for the complete machining of complex turned parts. The documented configuration combines a main and counter spindle with two tool slides, two 12-position turrets, Y and B axes, and C axes on both spindles. Machine type: INDEX G300 RatioLine Year of construction: 2009 Turning length: 710 mm Main spindle: D90 43 kW Counter spindle D90 28 kW Control: INDEX C200-4D The INDEX G300 RatioLine is designed as a flexible CNC turning machine for complete machining in a single setup. The main and counter spindles enable the transfer of the workpiece within the machine. The two tool slides support parallel and combined turning, drilling, milling, and threading operations. Feature Specification Series G300 RatioLine Machine type CNC turning and milling center with main and counter spindle Year of construction 2009 (according to nameplate) Turning capacity 710 mm Tool carrier 2 tool slides, each with a 12-position turret Control INDEX C200-4D with 26 cm color flat screen Operating and display language English Machining concept • Complete machining on main and counter spindle • Two tool slides for flexible machining sequences • First slide with X, Y, Z, and B axes • Second slide on the right with X and Z axes • C axes on main and counter spindle • Synchronized spindle functions via electronic cam 12-position tool turret in the spindle area Spindles and clamping system Feature Specification Main spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Main spindle power max. 43 kW at 100 percent duty cycle Counter spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Counter spindle power max. 28 kW at 100 percent duty cycle Indexing Main and counter spindle with 2.5-degree indexing C axes Available on main and counter spindle Clamping cylinder Through-hole clamping cylinder on both spindles Clamping pressure Variable on both spindles from 8 to 80 bar Spindle synchronization Electronic cam Internal detail and workpiece handling Tool slide and turret Feature Specification Tool slide 1 X, Y, Z, and B axes; turning length 710 mm Turret 1 12 stations, DIN 69880-30, involute and T-slot positioning Tool slide 2 Arranged on the right; X and Z axes Turret 2 12 stations, DIN 69880-30, T-slot positioning Tool capacity Total of 24 turret stations Thread drilling Rigid tapping with driven tools; C-axis required C-axis functions Transmit and Tracy function Work area with main and counter spindle as well as two tool turrets Control and electrical data Feature Specification Control INDEX C200-4D Screen 26 cm color flat screen Control cabinet 1,800 mm wide Signal light Blue; bar end and fault Teleservice Preparation for analog teleservice Nominal voltage 400 V AC Nominal current 118 A Maximum fuse rating 125 A Nominal power 69 kW Connected power 82 kVA Frequency 50 Hz Control voltage 24 V DC Read operating indicators The control panel photo shows the following individual counters. The general on-time and hydraulic counters are at 99,999:50 hours and thus appear as limit or saturation values. They should not be used as verified total operating hours. Feature Specification Spindle S1 9,682:10:41 h Spindle S2 3,561:06:03 h Fjdpfj Ai Eqzsx Aanjgi Spindle S3 12,230:20:08 h Spindle S4 12,311:38:59 h Chip conveyor 5,379:34 h Coolant 22,260:00 h

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Fodpfx Aasxrk Itenogi Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Fjdpfxjyyy Nxj Aanjgi

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: CUM300/S-DSF, Netzsch condux grinding mill completely in original condition. Are herbs ground with it. motor: Siemens Fedpfx Aeudygbeansgi 22kw 40.5A 2945 RPM Mill: used at most 2 years in operation incl. grinding plate incl. grinding rotor incl. pipework intake and fall air Lock: Coperion 150mm lock. hosokawa mill

Condition: excellent (used), Offered for sale is a used Ratzinger impact mill D800. 75 kW motor – NEW! Completely overhauled. Wear parts replaced. Steel construction included. Fgedpsw H Savofx Aanoi

Condition: used, functionality: fully functional, fuel type: electric, Infeed: approx. 1,000 x 700 mm Rotor diameter x width: 600 x 1,000 mm Electric drive: 37 kW Semi-mobile steel frame with infeed and outfeed hoppers. Fedpfx Aaezr D H Nsnjgi

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Fgodpfxsy Iyw So Aansi

Condition: like new (used), Manufacturer: Hazemag Year of manufacture: 2005 Type: AP-SA 1006 Jaw opening: approx. 690 x 515 mm Fgsdpfjwp Rhqex Aansi Mill weight: approx. 4,600 kg unused

Year of construction: 1991, condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 511 138K, Engine included. Fgodpfxozc Hp Aj Aansi Price upon request.

Condition: excellent (used), Year of construction: 2024, 2024 Mazak Integrex J-200S 5-Axis Multi-Tasking CNC Lathe With Mazatrol Smooth G Control Main Spindle Hainbuch Ø215mm 3 Jaw Power Chuck, Sub Spindle Kitagawa B-208 3 Jaw Ø210mm Power Chuck. Maximum Swing Ø530mm. Maximum Swing Over Cross Slide Ø530mm. Maximum Machining Ø500mm. Maximum Bar Working Capacity Main Spindle Ø65mm, Sub Spindle Ø51mm. Maximum Machining Length 910mm. Maximum Support Weight Main Spindle Chuck Work 200kg, Maximum Support Weight Sub Spindle Chuck Work 200kg. Axis Travel 'X'=450mm, 'Z'=1,119mm, 'Y'=200mm, ,W,=1,436mm, 'B'=–30° To 210° (5° Increment'), C'=0.0001° Increment. Rapid Traverse 'X'=40m/min, 'Z'=40m/min, 'Y'=40m/min, 'W'=30m/min,C'=555rpm. Main Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-6”. Spindle Bore Ø76mm, Sub Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-5". Maximum Milling Spindle Speed 12,000rpm (7.5kW Motor). 72 Position ATC. Spindle Nose Capto C6. Turning Tool Shank 25mm², Boring Bar Ø40mm, Maximum Tool Ø125mm, Maximum Tool Length 210mm. Power Requirement 35.34kVA. Power On Hours 2,127. S/No.354479 (2024). NOTE: A loading fee will be added to buyer's invoice of £100 + VAT. Fodpfo Ahg S Eex Aansgi With Through Coolant System, Cromar Chip Conveyor, Habor HBO-750PTSBM8 Oil Cooler, Habor HJ-400PSBM2 Oil Cooler, GTI GT 10L Slim Oil Mist Extractor, Parts Cathcher, Foot Switches, Signal Tower, Tooling Package (Consisting Of Kitagawa B-208 3 Jaw Ø210mm Power Chuck, Hainbuch Collets & Assorted Tooling) & Manuals (CD). Overall Machine Dimensions L3,790 x W2,420 x H2,500 mm. Weight 9,800kg.

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1999, Inlet opening: 720 x 200 mm Rotor diameter x width: 1,000 x 700 mm Max. feed size: up to 70 mm Fjdeyxp Uuepfx Aanjgi incl. discharge chute incl. semi-mobile steel structure incl. hydraulic unit incl. approx. 2.5 tons of spare parts and wear parts

Condition: excellent (used), Manufacturer: Hazemag Fedpfx Ajxlrk Ajanjgi Type: SAP5 Jaw opening: approx. 1,000 x 1,500 mm Capacity: approx. 120–400 t/h Weight: approx. 29,000 kg E-motor: 250 kW Siemens

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm Fedpfx Aev Hcwteanogi wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings Fgedpfx Aajzvgdlsnsi No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2003, 2003 Mazak Mega Turn A16N M/C CNC Vertical Turning Centre with Elevating Bridge, 'C' Axis & Mazatrol PC-Fusion Control Independant Ø1,600mm 4 Jaw Chuck. Maximum Swing Ø2,030mm. Maximum Table Load 12,000kg. Maximum Turning Height 1,828mm. Ram Travel 'Z'=1,067mm, 'X' Travel 599mm (Right), 1,016mm (Left). Cross Rail Travel 762mm. Maximum Table Speed 230rpm. Milling Spindle Maximum Speed 1,100rpm. 30 Position ATC. S/No. 163418 2 (2003). Note: Has Crossrail & Parameter Issue. Fgjdpfs Ahg Tfox Aansi With Chip Conveyor & Coolant System. Weight 32,300kg.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. Fedpfjzvgvnex Aanjgi 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Fsdpfxevzx Auo Aansgi Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: used, Year of construction: 2006, 2006 DMG Gildemeister GMX 400 Linear Multi-Tasking Twin Spindle CNC Lathe With Siemens 840D Control & Pneumotec Gantry Parts Loading System With Dual Rohm KUBF-400/4 Ø400mm Power Chucks. Swing Ø640mm. Maximum Turning Ø640mm. Maximum Turning Length 1,500mm. Axis Travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid Travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle Bore Ø107mm. Maximum Bar Capacity Ø92mm. Maximum Main Spindle Speed 4,000rpm (45kW Motor). Maximum Sub Spindle Speed 4,000rpm (45kW Motor). Maximum Rotary Spindle Speed 12,000 (22kW Motor). Rotary Spindle Taper Capto C6. 60 Position ATC. 12 Position Sauter Turret. 20 Position Loading Station With Air Blast Cleaning Tank. S/No. 07500001331 (2006). Fgsdpfxs Ahg R So Aanji With Coolant Paper Filtration System, Chip Conveyor, IFM Mist Extraction Unit, Oil Chiller, Automatic Doors, Foot Switches, Wash Gun, Handwheel, Signal Tower & Manuals. Overall Dimensions L9,347 x W4,646 x H3,018mm. Weight 24,000kg.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : Fjdpfxj Ai Epne Aanjgi • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm - Max machinable panel area: 2200 x 1700 mm - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm - Transport size (W x H x D): 3800 x 2300 x 2500 mm - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Fedpfx Aao Ahq D Honsgi Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Fgedpfx Asz D Tbwsansi Capacity > 100 kg / h (The engine is larger than Schutte) Stainless steel Simple design Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: NX1102192, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Fgsdoz Ix T Topfx Aanoi Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) Fjdpfxj Ah Eyuj Aanjgi *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Fedpfx Aoq Nf U Eeansgi Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Fgjdpfx Aovpl I Toanei Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg