CNC turning and milling center

INDEX G 200 YB

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Fpodpfx Astdwwmjb Uor

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm Fpedpfx Abowbvhaj Ujr x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm Fodpovwgmaefx Ab Uepr weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest

Condition: good (used), Year of construction: 1996, Machine is in good working condition. Fjdpfx Absuktcqe Uepr

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm Fjdpfxovpaa Rs Ab Ujpr pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Chip conveyor Fsdpfx Aswh U Edeb Uepr IRCO bar loading magazine

Condition: excellent (used), Year of construction: 2000, including accessories, tool holders, documentation Fpsdpswqq Awefx Ab Uor

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, The used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with an inclined bed and 2-axis flat guideways of medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2007, "CE" standard. Main features: Fpedpfet N Upvox Ab Uer X-axis travel 280 mm Z-axis travel 360 mm 45 mm Spindle: max. rotational speed 6,000 rpm Spindle motor power 7.5Kw Stations on turret 12 pos. Hydraulic tailstock with in-cycle quill, chip conveyor evacuation conveyor, set of tool holders, 250mm 3-jaw chuck with related jaws, and user and maintenance manuals complete the equipment.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 420 mm, turning length: 640 mm, turning diameter: 250 mm, spindle bore: 51 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, Equipment: chip conveyor, TAKISAWA TC-20 CNC Turning Center S/N: TLMZ6628 Swing: 16.5″ (419 mm) Max Turning Length: 25.19″ (640 mm) Max Turning Diameter: 9.84″ (250 mm) Fpjdpfxjw Na Dae Ab Uer Chuck Size: 8″ (203 mm) Bar Capacity: 2″ (51 mm) Spindle Speed: 4,000 RPM Spindle Motor: 15 HP (11.2 kW) Turrets: 1 Tool Stations: 12 Box Ways Construction Floor Space: 75″ × 50″ × 76″ (1,905 × 1,270 × 1,930 mm) Weight: ~5,600 lbs (2,540 kg)

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P Fodpfx Abev Raats Uopr