Used Injection Moulding Machines for sale (66,572)

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Codpfx Absyt R S Ae Dohb delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Cjdpfx Asilhfcsb Dohb

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Cjdoy N Uwcjpfx Ab Djhb

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Cedev Stbmjpfx Ab Djhb Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Chjdjx D Ea Iopfx Ab Dob Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN Csdpegrzh Ejfx Ab Djhb ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 2003, condition: used, Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible. Chedpjzun Upjfx Ab Djb

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Chjdpfxjx D Rq Ej Ab Djb

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Chjdpfx Abszx Agne Dsb Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!

Year of construction: 2006, condition: used, Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible. Chedpfx Abszun Uvo Deb

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Cjdpfxsy Exdxe Ab Dehb Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Cedpfx Abeymqz Ro Dehb terms of payment: 100% prior to delivery

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Codpfxshy Nnbe Ab Dehb Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Chodpfszd Er Rex Ab Dsb Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Cedpfx Aorbqtnsb Dohb Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Cedex Hz I Nopfx Ab Djhb Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Cedpfsw Ebpwjx Ab Dehb Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: used, A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement. Codpozyq S Uefx Ab Dohb

Condition: used, Year of construction: 2012, operating hours: 55,800 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Codpfxoylpyvo Ab Dehb

Condition: used, Year of construction: 2012, operating hours: 55,400 h, clamping force: 100 kN, displacement volume: 201 cm³, injection pressure: 2,000 bar, overall weight: 5,400 kg, screw conveyor diameter: 40 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Chsdpfeylpy Aox Ab Deb

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Cjdpfx Aezh N Tyjb Dehb terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Chjdpfxsy Ntl So Ab Deb

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Cjdsyrczgopfx Ab Dehb Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Chsdpfx Abjzxg Ame Djb Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection.

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Csdpfxswlkcas Ab Djhb Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net