Used Hotel Interior Design for sale (19,735)

Condition: new, IPETRONIK Type: Interior Climate Simulation Box Technical data and description of the system: IPETRONIK Interior Climate Simulation Box (new and unused) The interior climate simulation box is designed to simulate the passenger compartment for testing in a recirculated air mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and fed into the interior. The interior climate simulation box is used to test only rear evaporators installed in the passenger compartment. The insulating housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulating chamber: Dimensions: External: Width 1,860 mm Depth 2,360 mm Height 1,360 mm Internal: Width 1,700 mm Depth 2,200 mm Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with embedded eccentric locking catches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM diamond pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with the wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N/rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, leading downwards through the floor Chamber door: Lhjdpfezd Ukpex Ah Son Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heater tapes silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, heated viewing window, 500 x 500 mm, 3-pane glazed, surface heating (230 V), frame heating (230 V), heating controlled externally, silicone-free edging Sliding wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective film, closed with sheet metal on the reverse side (The rear wall can be adjusted manually and continuously to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is conveyed via a radial duct fan (Cosmo); heating is provided by an electric heater (Türk und Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk und Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC system: S7 300 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Ledpsz I Ti Aofx Ah Sohn Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: CO1040, The following components have been replaced: Engines Gearboxes Chains TECHNICAL DETAILS Design: Double-shaft paddle mixer Material: Stainless steel Batch capacity: 1,200 kg EQUIPMENT Stainless steel storage container at the bottom Lodpsz I Tkmofx Ah Sshn

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator. The unit is in full working condition and ready for immediate use. Advanced gravity convection technology ensures stable temperatures. Power-On Verified. Lhjdpfxjxzh H Ee Ah Sjn The Thermo Scientific Heratherm IMH400-S is a high-performance microbiological incubator designed for delicate samples. It features a stainless steel interior, intuitive interface, and exceptional temperature uniformity. Ideal for research and clinical labs requiring reliability and precision. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2012, condition: used, This listing is for a Haier ULT Ultra Low Freezer. The unit is in full working condition and is ready for immediate release. Overview: Haier Biomedical offers a range of ultra-low temperature (ULT) freezers specifically designed for the secure and long-term storage of sensitive biological products. These include viruses, germs, erythrocytes, leucocytes, and cutis. The units are ideal for hospitals, research institutions, and laboratories. Key Features: Lhedpfx Aoxxx Hwsh Sen Reliable Performance: Cabinet temperature can reach –86 ℃, with temperature uniformity within 6 ℃ (or 5 ℃ for model WD-86L728J). Energy Saving: Four independent inner doors and a four-layer sealing structure ensure excellent heat insulation, reducing energy consumption. Power consumption for model WD-86L728J is only 10.5 kWh/day. Highly efficient cooling fans and compressors combined with hydrocarbon refrigerants provide significant energy savings and long-term sample security. Low Noise Operation: Innovative refrigeration system design with quiet fans and compressors minimizes noise during operation. Secure Storage: Each unit features a lockable handle with a unique key specific to that unit. Additional padlock space enhances sample security. Drawer System: Multi-layer drawer system makes it easy to store and sort samples efficiently. Pressure Equalisation Port: Heated port prevents icing on the vent and allows users to reopen the main door soon after accessing the freezer. USB Interface: Enables users to download historical temperature data for compliance and auditing purposes. Alarm Functions: Multi-level audible and visual alarms include alerts for: High/low temperature Sensor error Power failure High ambient temperature Clean filter Door ajar Temperature Control: Temperature range from –86 ℃ to –40 ℃, adjustable in 1 ℃ increments, ensuring optimal storage conditions. Choice of Models: Models available with stainless steel interiors for added durability. Adjustable and Mobile Design: Adjustable feet at the front and castors at the back ensure stability and mobility. Additional Features: Energy Efficiency: Freezers utilize advanced insulation and hydrocarbon refrigerants for reduced energy consumption and environmental impact. TwinCool Technology (on select models): Two independent refrigeration systems provide continuous operation and sample protection even if one system fails. User-Friendly Interface: Equipped with large LED displays or touchscreen interfaces for real-time monitoring of cabinet temperature, set temperature, ambient temperature, and input voltage. Applications: Haier’s ULT freezers are suitable for storing a wide range of biological materials in healthcare, clinical, and research environments. Their reliability, security features, and energy efficiency make them a trusted choice for safeguarding valuable samples.

Condition: refurbished (used), Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight. Fully Refurbished 12 months ago spent over € 200.000 Key Features: Lhsdpfx Ahozavu As Sen - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations. - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs. - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps to increase efficiency and reduce manual labor. - Integration: They can typically integrate with other food processing equipment in a production line, such as mixers or chillers. - Customization: Options for customization may be available based on output requirements, packaging materials, and specific market needs. Technical Aspects: - Speed: The packaging speed can vary depending on the specific machine model, with some machines capable of filling hundreds to thousands of units per hour. - Ease of Cleaning: The machines are designed for easy disassembly and cleaning, complying with food safety standards. - Energy Efficiency: Modern Benhil machines may focus on energy efficiency, reducing operational costs. - Durability: Built to withstand high volume production environments, they are made from high-quality stainless steel and other durable materials. Applications: - Food Service: Used in restaurants, hotels, and catering services for packaging butter portions for table use. - Retail: Often used for packaging butter for supermarket sales in portioned formats. Paper feed: 90 degree Hopper: Stainless steel Guards: Electro Guards Case Packing: 5 x 8 x 5 pcs 200 per box Capacity: 420-510 pcs per minute Case Packer: Included Filling Volume: 6 - 20 grams Condition: Fully refurbished 12 months ago Latest Production: 2 months ago Electrical Requirements: 3 phase 400 v/50 and 60 hz USA ELECTRICAL REQUIREMENTS: Available upon request Available: Immediately Case Packer Model : 8342

Year of construction: 2016, condition: used, This listing is for the 2016 Thermo Scientific MSC 1.2 Safety Cabinet Class 2. The unit is in full working condition and ready for immediate use. Designed for reliable microbiological safety, the Thermo Scientific MSC 1.2 delivers essential personnel, product, and environmental protection. Ideal for clinical and research labs, it offers high-efficiency HEPA filtration and a sloped front window for comfortable and secure handling of biological agents. Lsdpfx Ajzgv Nroh Sohn Transparency Report and Technical Audit: Power-On Test: Verified; Control panel active, interior lighting operational, and airflow/fan system engaged.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, Ledpfx Ahezma E Dj Sjhn A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load Lhjdpsz Tf D Rsfx Ah Sjn MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, This listing is for the Foster EcoPro EP700H G2 Pro Cabinet Refrigerator Lodpfx Asyrf Tlsh Sjhn The unit is in full working condition and is ready for immediate use The Foster EcoPro EP700H Pro Cabinet Freezer is a professional laboratory-grade freezer designed for secure and efficient long-term sample storage. It provides stable low-temperature performance, energy efficiency, and a spacious interior suitable for scientific, medical, and research applications. Built with durable materials and advanced cooling technology, it ensures sample integrity while maintaining quiet and reliable operation. Ideal for laboratories, hospitals, and research facilities.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 5192, functionality: fully functional, operating hours: 812 h, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 40 mm, height adjustment type: mechanical, feed rate X-axis: 4 m/min, actuation type: electric, total height: 1,620 mm, total length: 3,640 mm, total width: 980 mm, overall weight: 850 kg, Equipment: CE marking, documentation/manual, We offer this very well-maintained BI-MATIC 4.5 D.Y.T.S. edge banding machine, manufactured in 2007. Manufacturer: BI-MATIC Model: 4.5 D.Y.T.S. Serial number: 5192 Year of manufacture: 2007 Voltage: 400 V Frequency: 50 Hz Current: 9 A Weight: 850 kg Pressure: 6 bar Operating hours: 6447 m Lhjdpj Aarnuefx Ah Sjn Hot melt adhesive Units: - Gluing unit - Flush trimming units - Radius trimming units - Corner rounding units - Buffing units The units can be activated or deactivated separately. - Industrial design for precise edge processing - Integrated control panel with display - Emergency stop switch for increased safety - Robust housing in a neutral gray color - Feeding system for the edge strips The machine is in good visual condition, as can be seen in the pictures. It provides a solid basis for clean results in furniture manufacturing or interior design. If you have any questions about this machine, please do not hesitate to contact me. If you have any further questions or require more information, please send us a message or call us.

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet also known as a biosafety cabinet designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Ljdpfx Asxhfkbjh Sohn Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Eco® Control System A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics Lhsdpfx Ahoxhfpqo Son The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Options & Accessories Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Ljdpfsxhd Ixjx Ah Sohn Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, This listing is for BioCold BIO110FZSS Spark Free Underbench Laboratory Freezer The unit is in full working condition and ready for immediate use The BioCold BIO110FZSS is a 110 litre underbench laboratory freezer designed for general laboratory storage at approximately -20°C. It features a spark-free interior, reversible door, four removable solid baskets and an operating range of -18°C to -23°C. External dimensions are approximately 845 x 545 x 570 mm and weight is 39 kg Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Lsdpfez D Hmgjx Ah Sshn

Condition: used, This listing is for a Labcold RLPR1514 Refrigerator The unit is in full working condition and is ready for immediate release The Labcold RLPR1514 is a Sparkfree Laboratory Refrigerator with a capacity of 400 litres, designed to safely store flammable materials by eliminating any sources of ignition within its chamber. The Labcold RLPR1514 is a sparkfree laboratory fridge designed for safely storing volatile substances without any sources of ignition inside the chamber. It has a 400L capacity, fan-assisted cooling, and comes with plastic-coated wire mesh shelves. The fridge features a digital temperature display, alarms for high/low temperatures and door open alerts, and includes a fitted door lock. Specifications: External Dimensions: 1855h x 600w x 585d mm Internal Dimensions: W506 x D485 x H1620 mm Safety Features: Sparkfree safety interior Cooling & Defrosting: Off Cycle Automatic defrosting, fan-assisted cooling Shelves: 6 (including 2 adjustable shelves) Ledpfexhf U Tsx Ah Sshn Security: Key lock with two keys Temperature Range: 0°C to 10°C Alarms & Monitoring: High/Low temperature alarm Min/Max recording Door open alarm Door Type: Solid

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lodpfxsxhfnyj Ah Sehn Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Ledpfx Ajxhdthsh Sshn Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: good (used), Year of construction: 2016, machine/vehicle number: 302.11.021.16, functionality: fully functional, operating hours: 573 h, power: 12 kW (16.32 HP), input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 12, For sale is our FORMAT4 profit H200 13.33, manufactured in 2016. The CNC machine was primarily used in our carpentry shop for furniture and interior design and has relatively few operating hours. Equipment includes: * 4-axis CNC * additional swivel unit * tool changer * console table with vacuum clamping system Lhsdpfxez Imtnj Ah Sen * vacuum pump included * control station including PC and handheld device * including tool set * only 572 operating hours The machine is being sold due to the closure of our carpentry shop for health reasons. It is currently connected and ready for operation and can be inspected and tested by appointment. Location: 48308 Senden Dismantling, loading, and transport will be carried out by the buyer at their own risk and expense. Price: €30,000.00 net, negotiable / €35,700.00 gross, including 19% VAT. An invoice with VAT will, of course, be issued.

Condition: used, This listing is for the Arctiko LR500 Refridgerator The unit is in full working condition and is ready for immediate use Arctiko LR 500 Biomedical Refrigerator Item Code: DAI 0240 Lhjdpfoxhf Dhjx Ah Sen Temperature Range: +1°C to +10°C Capacity: 515 Litres Overview The Arctiko LR 500 is a high-performance biomedical refrigerator designed to meet the demanding storage requirements of laboratories, hospitals, research centers, and pharmaceutical environments. This unit offers precise temperature control, a user-friendly interface, and a flexible interior layout with options for shelves, drawers, or a combination of both. Key Features Temperature range: +1°C to +10°C with high temperature stability Flexible storage: Customizable with adjustable shelves, drawers, or a mix of both High capacity: 515 L of internal storage space User-friendly design: Automatic door closing Reversible door for versatile placement Adjustable shelving High performance: Maintains temperature even in environments up to 43°C ambient temperature Built-in alarms: Audible and visual alerts for temperature deviations, door open, power failure, and sensor errors Battery backup: Up to 72 hours for alarms and temperature display Connectivity: USB port, RS-232/RS-485 for data logging and remote monitoring Security: Lockable door with key for secure storage

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Lsdpfx Aexxygxeh Sehn Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. Lsdpfxexxx I Us Ah Sehn - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...

Condition: used, This listing is for a Liebherr Hausgerate SN-ST 3910 Refrigerator The unit is in full working condition and is ready for immediate release The Liebherr LKv 3910 MediLine is a laboratory refrigerator designed to meet the stringent requirements of pharmaceutical and laboratory environments. It ensures efficient, Pharmacopoeia-compliant storage with precise temperature control and robust safety features. Key Features: Precise Temperature Control: The electronic controller with a digital display allows temperature adjustments between +3°C and +16°C, accurate to 0.1°C. Temperature Monitoring: The digital display continuously monitors internal temperatures, triggering visual and audible alarms for persistent over- or under-temperature conditions. The system records the last three alarms for review. Construction: The exterior is made of white painted steel, while the internal compartment is constructed from polystyrene (PS), ensuring durability and ease of cleaning. Safety Features: A power failure warning light, temperature calibration capabilities, and a safety thermostat to prevent freezing enhance the reliability of the unit. Technical Specifications: Capacity: Gross/Net: 360 liters. Dimensions: Exterior (W x D x H): 600 x 620 x 1840 mm. Interior (W x D x H): 440 x 440 x 1630 mm. Shelving: Equipped with 5 adjustable shelves. Cooling System: Features an internal fan for uniform temperature distribution. Control Panel: Digital display for easy monitoring and adjustments. Ledpfx Ahoxwcz No Sjhn Alarms: Open door alarm. Visual and acoustic alarms for minimum and maximum temperature deviations. Adjustable alarm settings. Connectivity: Includes a dry contact and RS 485 interface for data monitoring and integration. Defrost: Automatic defrosting mechanism. Additional Features: Porthole for PT 100 sensor insertion. Insulation: 40 mm thickness for energy efficiency. Noise Level: Operates at 48 dB. Climate Class: SN-ST, suitable for ambient temperatures up to 43°C. Energy Consumption: 0.865 kWh/24h. Electrical Specifications: 220 - 240 V / 50 Hz with a connection rating of 1.5 A. Weight: 68 kg.

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Lhjdpfx Ajxv Dk Njh Sjn Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: new, Mobile Culinary Container: Bar, Bistro & Lounge – All in One Transform any location into a hotspot with this high-quality catering container that combines functionality and modern design. This model is much more than just a sales stand – it's an inviting venue that encourages guests to linger. The Interior: Well-Conceived and Inviting Central Bar: The centerpiece of the container is the attractively designed bar area. Stylish pendant lamps in an industrial design provide the perfect lighting atmosphere above the bar, enhancing the modern look. Cozy Seating Lounge: The left side of the interior is designed as a comfortable seating lounge. Guests can enjoy drinks and food in a relaxed atmosphere here. The combination of soft cushions and the warm color creates a high level of comfort. Directly to the right of the entrance is this versatile piece of furniture that can be flexibly used as a counter, service station, or even a checkout area. Flexible Bistro Tables: Opposite the bar, directly in front of the large window front, are bistro tables with matching chairs. This area offers a great view of the outside and is ideal for a quick coffee or snack. Highlights at a Glance: Full-Surface Glass Front: The generous glazing across the entire front creates a bright, light-filled atmosphere inside and makes the space appear larger. At the same time, it offers passersby an attractive view and entices them to visit. Additional Outdoor Area: The container is designed so that it can be perfectly expanded with an outdoor area. Matching tables and chairs for outdoors (as shown in the picture) are the ideal complement to increase capacity and attract guests in good weather. Whether as a trendy coffee bar, an exclusive cocktail stand at events, a food station at festivals, or a pop-up restaurant in the city – this catering container is the ideal companion for mobile catering concepts that value quality and atmosphere. Give your catering business a mobile home that inspires. Contact me for more details and to arrange a viewing! Lsdpfxe Ad Ihxo Ah Sjhn I hope you like this description! You can, of course, adapt or supplement it to your liking, e.g., with specific dimensions or technical details. Price is plus delivery of 1,500.00 euros net within Germany.