Used International 433 for sale (9,284)

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Nodpfsycku Aex Aacscn Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage Ncedpjyckuvsfx Aacen TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Ncedpfsyckuiox Aacjn Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Nodeyckucopfx Aacocn Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Nodsyckt Espfx Aacjcn Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Nodpsycktrefx Aacocn Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m Nedswva Rnopfx Aacocn

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Suitable for conveying powders Tube diameter: 76.1 mm Ncodpsyf Aztofx Aacjn Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) See our other listings VMA Wekerom

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat Nedpfxogigv Dj Aacecn

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good Nodpjtqlq Ejfx Aacecn optically there are traces of storage

Condition: excellent (used), mileage: 66,266 km, power: 120 kW (163.15 HP), first registration: 04/2017, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 7,200 mm, total width: 2,100 mm, Year of construction: 2017, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, electric window regulation, onboard computer, power assisted steering, traction control, trailer coupling, General information Cab: single Registration number: 40-BJL-1 Technical information Engine capacity: 2.143 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 3500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 3.196 kg Carrying capacity: 1.804 kg GVW: 5.000 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Nodpjycgmuefx Aacocn Functional Tipper: Back Maintenance, history and condition APK (MOT): New APK (MOT) upon delivery Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information Video of the vehicle in operation: Very neat and in mint condition Mercedes Sprinter 516 CDI GVW 5,000 KG N2 WB 433 Tipper Air conditioning Lane Assist 66,000 km verifiable

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Ncedpfoxyk S Uox Aacon

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Nedpfxjyg Nvtj Aacscn

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Njdpfxexf Ikfo Aacscn

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Nodpfx Ajx Uq T Doacocn

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. Nodpfxsw Rv Tae Aacecn ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Nodpfxoxyllve Aacscn Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm Ncjdjxzuzcjpfx Aacjn weight of the machine ca. 2,25 t

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Njdpeurw Uysfx Aacjcn Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are selling a TOS BDU 250 A internal cylindrical grinding machine due to a trade-in, with the following key specifications: Grinding diameter: 250 mm Maximum longitudinal table stroke: 600 mm Maximum internal diameter: 250 mm Minimum diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mounting quill: currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Grinding spindle headstock adjustment: 15° and 90°, mounted on oscillating longitudinal table. Features: Njdpfx Aow Rllxoacecn - Coolant tank - Hydraulics - Used internal grinding spindle - Machine lamp Machine information: Machine fault (transformer defective, automatic operation without dressing device).

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm Ncjdpfx Aaoyh Hhgocon - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW weight of the machine ca. 4,2 t Nsdpfsycxlcjx Aacscn

Condition: used, Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg Njdpfxol Ha R Hj Aacjcn

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer Nedpfxsd Sdl Ij Aacjcn -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Condition: used, Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 "inches Ncedpfjdz A Tfex Aacjn -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg