Used Inverter for sale (1,506)

Year of construction: 2006, condition: used, Power: 11 kW (15 HP) Blodpfx Aex Arg Esflsr Manufacturer: Robopac Model : Athena 5545 / Combi Year: 2006   Type : Automatic L-shaped shrink-wrapper and shrink tunnel Dimensions of sealing bar : 550 x 450 mm Sealing dimensions : 500 x 350 mm Minimum product size : 50 x 50 x 20 mm Maximum product height : 120 mm Film reel width: 600 mm Inverter-controlled conveyor belt speed: 10 – 40 m/min Production capacity: 30-35 packs/minute (depending on product dimensions and shrink film specifications) Power : 11 KW   Machine in operation: ?v=XY4arSTWZSs

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D55N4 -Power: 55 kW Bedpfjxnb Txox Aflelr -Input: 380-480V / 50/60Hz / 97.2A -Output: 380-480V / 0-500 Hz / 106 A -Quantity: 1 frequency converter available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 54 kg/piece

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. Bledpfxoxxy Uis Afljr THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: like new (used), Year of construction: 2022, Electric plate rolling machine Year of manufacture: 2022 Frequency inverter-controlled drive Capacity: 1050 x 1.0 mm Bjdpfxoxx Av Ao Afljlr

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Bodperlk Ikofx Aflelr

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 320 mm, spindle mount: MK 1, type of input current: AC, rotational speed (max.): 1,600 rpm, rotational speed (min.): 130 rpm, overall weight: 50 kg, spindle motor power: 250 W, year of last overhaul: 2023, Equipment: documentation/manual, rotational speed infinitely variable, HOBBYMAT BFE 65 PRECISION MILLING MACHINE WITH EXTENSIVE ACCESSORIES For sale: Professional Hobbymat BFE 65 milling machine in perfect condition, including comprehensive accessory package. This East German precision machine (circa 1985-1992) has been lightly used for hobby work and never deployed industrially. SPECIFICATIONS: • 4-speed gearhead: 315, 560, 900, 1600 rpm • Motor: 0.25-0.29 kW with KIMO digital frequency inverter • Table travel: 160 x 450 mm (X-Y axes) • MT1 spindle taper • Digital readout (DRO) system on table • Complete documentation included COMPREHENSIVE ACCESSORY PACKAGE INCLUDED: Bedpfx Ajx Ak Risflelr ✓ Precision rotary/dividing table with 4-jaw independent chuck ✓ Complete T-slot clamping kit in red case (clamps, step blocks, studs, nuts) ✓ Precision milling vise ✓ Multiple HSS drill bit sets in wooden storage blocks ✓ End mill set in wooden storage ✓ Countersinks, center drills, reamers ✓ Tool holders and MT1 arbors ✓ Complete manuals (German) CONDITION: Great condition, well maintained, all functions operate excellently. Machine is fully operational and is currently connected and ready for a demo in Apeldoorn The Netherlands. It will be moved to conditioned storage in Zoetermeer The Netherlands before Christmas. PRICE: € 3,000 (complete package, not separable) Collection: Currently Apeldoorn NL, soon Zoetermeer NL A complete, professional milling setup in close to perfect condition. The comprehensive accessory package alone is worth €800-1200. This East German precision machine with digital control and DRO system provides you with all necessary tools and work holding for professional work immediately. Interested? Contact me for viewing!

Condition: used, Year of construction: 2018, functionality: fully functional, planing height: 230 mm, planing width: 320 mm, FEM9-32XC / RHINO 800XL Feeler-series 9 FEELER series A. Capacity: (1) Working width: 18–320 mm (2) Working thickness: 6–160/230 mm (3) Minimum working length: 240 mm (4) Feed speed: 7–36 m/min B. Motor: (1) 1st bottom horizontal spindle: 10/20 HP with outboard bearing (2) 2nd right vertical spindle: 10/15 HP with outboard bearing (3) 3rd left vertical spindle: 10/20 HP with outboard bearing (4) 4th top horizontal spindle: 10/20 HP with outboard bearing (5) 5th bottom horizontal spindle: 10/20 HP with outboard bearing Bljdpfxsxrla Rs Aflor (6) 6th right vertical spindle: 10/15 HP with outboard bearing (7) 7th left vertical horizontal spindle: 10/15 HP with outboard bearing (8) 8th top horizontal spindle: 10/20 HP with outboard bearing (9) 9th bottom horizontal spindle: 10/20 HP with outboard bearing (10) Feed drive: 15 HP (Inverter) (11) Elevation: 2 HP C. Spindles: (1) Spindle diameter: 50 mm for 1st, 2nd, 3rd, 4th, and 9th spindles; 40 mm for 5th, 6th, 7th, and 8th spindles (2) Spindle cutting speed: 6200 rpm (3) Adjustment range, vertical spindle: 80 mm (4) Adjustment range, horizontal spindle: 35 mm D. Cutting circles: (1) 1st bottom horizontal spindle: 100–180 mm (2) Right vertical spindle: 110–250 mm (3) Left vertical spindle: 110–250 mm (4) 1st top horizontal spindle: 110–250 mm (5) 2nd bottom horizontal spindle: 110–250 mm (6) Right vertical spindle: 110–250 mm (7) Left vertical spindle: 110–250 mm (8) Top horizontal spindle: 110–250 mm (9) Bottom horizontal spindle: 110–250 mm E. Miscellaneous: (1) Dust extraction port diameter: 160 mm (2) Infeed table: 2–2.5 m (3) Feed roller diameter: 140 mm (4) Includes 50 mm cutterhead F. Standard Equipment: (1) Digital feed speed display: DPRLF-40K (2) Automatic table lubrication system (3) Centralized point-to-point lubrication (4) Pneumatic chip breakers on top spindles (5) Pneumatic fence on left spindles (6) CE marking (7) Motor: IE3 (8) Sequence: Bottom, Right, Left, Top, Bottom, Right, Left, Top, Bottom Options: • OP014-15 Variable Feed Speed Controller, 15 HP inverter • OP001 Pneumatic control for 1st and 2nd elevation infeed roller • OP041 Outboard bearing for 2nd, 3rd, 6th, and 7th spindles • OP017 Digital position controller for 3rd, 4th, 7th, and 8th spindles • OP042C Enhanced sound enclosure • OP023AE3-15 Feed motor, 15 HP (E3) • OP023BE3-10-15 Motor for 10/15 HP spindle (Y/A, E3) • OP008-5 Extension table, 2.5 m with stand and fence • OP023BE3-10-20 Motor for 10/20 HP spindle (YiA, E3) • OP002 Three-mode feed roller pneumatic elevation • OP010-230 Extra working height 230 mm for 2nd, 3rd, 6th, and 7th spindles • OP008A Air cushion table, 320–400 mm This translation uses precise, industry-standard terminology suitable for specialized machinery listings.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Bledpfxsxyxdfj Aflor -Manufacturer: Lincoln Electric, TIG welding machine -Type: INVERTEC V260-T -Welding current: max. 260 A -Cooling: gas-cooled -incl.: ground cable, hose assembly (see photos) -Dimensions: 580/240/H400 mm -Weight: 23 kg

Condition: new, The V-Turn 410/1500, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe designed for both precision machining and robust production tasks. This bestselling model from KNUTH features an inverter and a powerful 5.5 kW motor, offering spindle speeds up to 3,000 1/min, making it highly effective for processing workpieces with small diameters while maintaining exceptional quality. The constant cutting speed function during face turning automatically adjusts spindle speed based on the diameter, ensuring turning results that rival those of CNC machines. Built with a heavy ribbed machine bed and a solid cast-iron frame, the V-Turn 410/1500 provides stability and strength for heavier machining applications. Additional features include a micrometer stop, turret stop, and integrated central lubrication for low maintenance. With extensive standard equipment, this machine is ready for various turning operations. To enhance your productivity with a top-notch Engine Lathe, order online today or request a quote. Bledsuxddcepfx Aflor

Condition: new, Year of construction: 2025, Machine Type: Turbo 20 Manufacturer: ERBA Power (kW): 1.1 Total Volume: 20 liters Description: The ERBA Turbo 20 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces within short processing times. The machine features a digital process timer and a digital speed display. The disc speed can be adjusted via frequency inverter. The Turbo 20 is available in both dry and wet configurations. It can be linked with a separation unit. Bljdpfx Afsx Aqykolsr The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for reference only; actual appearance and size may differ from the images. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR). This offer serves only as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include our general terms and conditions with legal notice and information on the right of withdrawal, prior to the purchase/contract conclusion.

Condition: new, Year of construction: 2025, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed Blodpexyz T Aefx Aflor adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Moeller, frequency converter -Type: DF5-322-018 -Power: 0.4 kW -Input: 230 V 50/60 Hz -Output: 3AC 0...Ue -Number: 1x inverter available -Dimensions: 130/90/H115 mm -Weight: 0.8 kg Bledoxx Rw Iopfx Afljr

Condition: new, Year of construction: 2025, Machine type: EVT 80 Manufacturer: ERBA Power kW: 0.75 Total capacity: 80 liters Description: The EVT 80 long-tub vibratory finishing machine from ERBA features a durable, hot-cast polyurethane lining. Discharge and separation are carried out via bottom discharge, which can be operated manually or pneumatically. Removable partition walls allow division of the processing tub into compartments for individual part processing. The machine is equipped with an electric control cabinet, and can optionally be fitted with a fully automatic PLC process controller. On request, a reinforced suspension and a more powerful motor can be installed for heavier workloads. The motor speed can be continuously adjusted using a frequency inverter (optional). The stated price is net, plus the currently applicable statutory VAT and shipping costs. Photos may show the system with accessories, which are optionally available and subject to additional costs. The price applies to the base machine. The photos are for illustrative purposes; actual appearance and size may vary from the pictures shown. If you are interested, we look forward to hearing from you. We are happy to provide you with consultation, without obligation. Bljdpfx Afex Aqxgslor The European Commission provides a platform for online dispute resolution (ODR). This offer is solely for presenting our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions with legal notice and information on your right of withdrawal, before any purchase or conclusion of contract takes place.

Year of construction: 2025, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- Bljdpfx Afoxyz Tislor METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Mitsubishi, Frequency converter inverter -Type: FR-A024-SO.4K-EC -Power: 0.4 kW -Input: 220-240 V 50/60 Hz -Output: 2.5A MAX 3PH AC200-240V 0.2-400Hz -Quantity: 1x Inverter available -Dimensions: 140/140/H150 mm Bedpfx Aoxx Rtisflslr -Weight: 2 kg

Condition: new, Year of construction: 2025, Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt Description: The ERBA Separation Unit YE 200 is used for separating workpieces from abrasive media. Two motors provide the necessary movement of the screen. The YE 200 can be operated as a standalone machine or integrated with other systems, such as the ERBA Turbo (centrifugal finishing unit). The separation deck can be quickly and easily changed as required. Optionally, a frequency inverter can be installed, allowing stepless adjustment of motor speed. The stated price is net, plus the currently applicable VAT and shipping costs. The pictures may show the system including accessories, which are optionally available at additional cost. The price quoted refers to the base machine only. Sample photos are used. Actual appearance and dimensions may differ from the images. Bljdpex Aqvxjfx Aflsr If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are concluded via telecommunications (e-mail, telephone, messaging portal). In the first step, we will make you a non-binding offer, in which we will also inform you about our general terms and conditions with legal notice and the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets Bjdpfx Afexyz Srslelr - 2 pcs of afterpress units - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Bjdpfx Aow S E D Rsfljlr Manufacturer: Mitsubishi, Freqrol A024 frequency converter -Type: FR-A024-SO.4K-EC -Power: 0.4 kW -Input: 220-240 V 50/60 Hz -Output: 2.5A -Number: 3x inverters available Price: per piece -Dimensions: 140/115/H150 mm -Weight: 1.6 kg/pc.

Condition: new, Year of construction: 2025, Machine type: EVT 400 Manufacturer: ERBA Power kW: 4.0 Total volume: 400 liters Description: The EVT 400 long-tub vibratory finishing machine from ERBA features a durable, hot-cast polyurethane lining. Unloading and separation are performed via bottom discharge (manual/pneumatic). With optional partition walls, the working tank can be divided into compartments for individual part processing. The machine is equipped with an electrical control cabinet and can be fitted with fully automatic PLC process control (optional). On request, reinforced suspension and a more powerful motor can be installed for increased load demands. The motor speed can be infinitely adjusted by frequency inverter (optional). The stated price is net, plus the currently applicable statutory VAT and shipping costs. The system shown in the images may include accessories which are optionally available and subject to additional costs. The stated price refers to the base machine. The photos are sample images. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We will be happy to advise you with no obligation. Blsdpfxsx Ag Iwe Afler The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is solely for presenting our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). As the first step, we will provide you with a non-binding quotation, along with our general terms and conditions with legal notice and information on your right of withdrawal, before a purchase/contract is concluded.

Year of construction: 2025, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm Blsdpfx Afexyz Exjler - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0020-5E3-4-XXX -Power: 0.55 kW -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz -Control head: Type: MDX91A-0020-5E3-4-T01/CFN21A Bodsxnw Tzspfx Afljlr -Number: 2x inverters available -Price: per piece -Dimensions: 350/95/H210 mm -Weight: 4.1 kg/pc.

Condition: new, Year of construction: 2025, Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 l Description: The EVT 130 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying or separation is performed via bottom discharge (manual/pneumatic). By using partition walls, the working tank can be divided into compartments, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be equipped with a fully automatic PLC process control system. On request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). Bedpfox Ag Hyox Aflelr The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories, which are available at extra cost. The stated price refers to the base machine. The photos are for illustration purposes only. The actual appearance and size may differ from the images. If you are interested, we look forward to your enquiry. We will be happy to offer you detailed and non-binding advice. The European Commission provides a platform for online dispute resolution (OS platform). This offer solely serves to present our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, which will also inform you about our general terms and conditions, our imprint, and your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2025, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed Bljdpfoxyz Erox Aflsr adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Condition: new, Year of construction: 2025, The ERBA Separator Line YE-60 is used for separating workpieces from abrasive media. It can be operated as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal finishing system). The separation deck can be quickly and easily swapped, depending on your requirements. An optional frequency inverter can be installed, enabling stepless adjustment of the motor speed. The YE-60 can be equipped with many optional extras to simplify the separation process, such as magnetic separation for small parts, a washing nozzle, or a parts hopper. Technical Data: - Gross volume: 60 L - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (Length x Width x Height) All prices are net, VAT at the current legal rate and shipping costs are additional. Some images may show the machine including accessories that are optionally available at extra cost. Bedpfx Aon Ut N Hofljlr If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. All contract negotiations are conducted via telecommunications (email, telephone, messaging portal). As a first step, we will provide you with a non-binding offer, which will also include information on our general terms and conditions with legal notice and the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2025, The ERBA EVP-RA 350 vibratory finishing machine features a rising, sloped process bowl floor with integrated separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the built-in drop step. Discharge and separation are carried out via the integrated flap (manual or pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines via its side discharge port. The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and long service life, based in part on the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 385 liters - Channel width: 340 mm - Vibration motor power: 2.2 kW - Speed: 1,400 rpm Blodpfx Aon Ut Ureflsr - Inner bowl diameter: 1,200 mm All prices are net, excluding the currently applicable statutory VAT and freight costs. Some images may show the machine with accessories that are available as options and subject to additional charges. If you are interested, please contact us. We would be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, or messaging portal). You will first receive a non-binding offer from us, which will also provide information about our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.