Used Inverter for sale (1,617)

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Itedoxxy Uiepfx Addeb Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. Itsdpfx Aexab S Eoddeb - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm Iedpfxexabavo Addotb dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 Iodpfx Adjxabhgsdstb - dust bag

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized Itedpexabtcsfx Addjb - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, Itodpfow Nafksx Addsb controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency inverter Drive Controller Combivert -Type: F4 -Article No.: 13 F4 C1E-3480/1 4 -Power: 8.3 kVA / 5.5 kW -Number: 2x frequency converters available -Price: per piece -Dimensions: 350/130/H280 mm Itedpfjwcyh Tsx Addob -Weight: 6.6 kg/piece

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter, inverter, Movidrive -Manufacturer: SEW Eurodrive, converter Movidrive type MDX60A0015-5A3-4-00 -Power: 2.8kVA Isdpfonah A Ujx Addetb -Input: 3x 380- 500 V 50/60 Hz -Output: 0-599Hz -Control head:Type: MDX61B0015-5A3-4-OT -Dimensions: 340/105/H235 mm -Weight: 4.7 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Lenze, frequency converter type 33-8213-E with Interbus S -Max. power: 2.2 kW -Input: 3/PE AC 400 V 11.0 A 50/60 Hz -Output: 3/AC 0-400 V 5.5 A 2.2 kW 0-480 Hz -Number: 5x inverters available Itodpsh Rpafsfx Addsb -Price: per piece -Dimensions: 280/240/H85 mm -Weight: 3.1 kg/pc

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current Isdpjfwg H Hofx Addetb -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Condition: good (used), Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm Itodpfx Adodntf Hodjb -Weight: 694 kg

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Siemens: Sinamics S120 Single Motor Module 6SL3120-1TE21-0AA3 -Max. Power kW -Input: DC 600V -Output: 3AC 400V 9A -Quantity: 1 piece available Iodpochk Idjfx Addetb -Dimensions: 500/50/H270 mm -Weight: 5.0kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller Itedpoxt Hpcefx Addob -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 -Item No.: -3AHA -Power: 4.0 kVA -Dimensions: 320/90/H220 mm -Weight: 3.7 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AD0 -Input: DC 510-720 V 7.2A -Output: 3AC 0-480V 3A/3A 0-550Hz A Itjdpfxsxnkanj Addjb -Number: 8x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.6 kg/piece

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module Itodpfxexnkgbj Addob -Type: 6SL3120-2TE21-0AD0 -Input: DC 510-720 V 22 A -Output: 3 AC 0-480V 9A/9A 0-550Hz A -Number: 10x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.8 kg/piece

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller Iedpfowcyfxex Addstb -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F4 -Part No.: 15 F4 C1E-3420/1 4 -Power: 17 kVA / 11 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 350/130/H280 mm -Weight: 7.7 kg/pc.

Condition: good (used), Year of construction: 2021, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 55 kg/piece Isdpfx Aoxlzibeddstb

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module -Manufacturer: Siemens, Sinamics Active Line Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3130-7TE23-6AA1 -Input: 3AC 380-480V - 50/60Hz -Output: DC 600V 60A 36kW -Dimensions: 500/150/H270 mm Isdpfxjvuxp Ie Addetb -Weight: 10.6 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Type: 8200 vector E82EV371_2C (EDK82EV222) -Input: 1/N/PE AC 230/240V 5.0A 50/60Hz -Output: 3/PE AC 0-230/240V 2.4A 0.37kW 0-650Hz -Number: 3x frequency converters available -Price: per piece -Dimensions: 180/60/H160 mm -Weight: 0.75 kg/piece Ijdpfx Adjcblxisdetb

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process. -Input: 400 V -Exit: -Technical data: see photos -Number: 14x transformer available -Price: per piece -Dimensions: 310/200/H415 mm Itodpfx Ajcft T Djddsb -Weight: 60 kg/piece

Condition: good (used), Power supply, converter, power inverter, power supply unit Itjdpfxjb S Ht He Addjb -Type: AS-i Power Supply AC1218 -Output: DC30.5V/8A -Number: 11x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -Input: 200-600 V -Output: 115-230 V -Technical data: see photos -Number: 9 transformers available Iodpfxjd Hl Ups Addetb -Price: per piece -Dimensions: 150/175/H160 mm -Weight: 16 kg

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Manufacturer: Stöber, frequency converter type -Input: 3x 400 V - 50/60 Hz -Output: Hertz 0-150 Hz max. 4 kVA -Dimensions: 270/100/H300 mm -Weight: 5.9 kg Isdpfx Ajrwqcdjddotb

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8200-C Itjdpsu Ridrefx Addob -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module Itjdenah Dkjpfx Addjb -Manufacturer: Siemens, servo controller Sinamics G110 CPM110 AIN -AC Drive: Type G110 CPM110 AIN 6SL3211-0AB17-5UA1 -Individual components: see photos -Number: 3x module available -Price: per piece -Dimensions: 150/90/H140 mm -Weight: 0.9 kg/piece