Used Itm Antares 70 for sale (12,612)

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Kodpjiivfqjfx Addodg Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: used, Tyres Front tyre condition: New Kdedpfx Aowh Dadoddog

Condition: used, Applicable material: Food Power: 25 kW (34 HP) Empty weight: 1.195 kg Dimensions (LxBxH): 110 x 160 x 130 cm Cargo space capacity: 70 l Current frequency: 50 Hz Voltage: 400 Rotation speed: 5000 rpm Ksdpex Tcnqefx Addsdg Volume: 70 l

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 16-page web offset printing press Manufacturer: manroland Model: Rotoman 70 Year of manufacture: 2004 Cut-off length: 620mm Web width: 965mm Condition: fully operational, powered on, inspection possible Availability: immediately Description: 1 x Megtec DLC 1600 reel changer 4 x manroland printing units 1 x web guiding device 1 x Contiweb dryer (without integrated afterburner) 1 x folder superstructure 1 x manroland folding unit with 2nd former 1 x manroland register control 1 x Planatol Combijet 8MOD gluing unit Kdedjxuniajpfx Addjg

Condition: ready for operation (used), Year of construction: 2009, This HOLZHER CUT 70 6110 panel saw was manufactured in 2009. It features a cutting size up to 3900 × 3900 mm, a maximum cutting height of 70 mm, and saw blade projection of 82 mm. The main sawing unit has a motor power of 11 kW and a blade diameter of 350 mm. It supports a saw carriage and pusher speed of 0–70 m/min. Consider the opportunity to buy this HOLZHER CUT 70 6110 panel saw. Contact us for more information. • Workpiece • Cutting size: 3900 × 3100 mm or 3900 × 3900 mm • Max. cutting height: 70 mm • Max. saw blade projection: 82 mm • Sawing Unit • Motor power: 11 kW • Saw blade Ø: 350 mm • Rotational speed: 4070 rpm Scoring Unit • Motor power: 1.1 kW • Saw blade Ø: 180 mm • Rotational speed: 6070 rpm Feed / Carriage • Saw carriage & pusher speed: 0–70 m/min (continuous) • Return speed: 70 m/min • EU feed speed: 0–25 m/min Media • Compressed air: 6 bar, 32 NL per cutting cycle • Dust extraction: • Connections: 1×120 mm (base machine), 3×120 mm (pressure beam) Kdsdpsx Ut Iksfx Addjg • Capacity: 4500 m³/h • Air speed: 30 m/s Additional Equipment • Number of tables: 3

Condition: used, Field of application: Construction Please contact ATS Norway for more information Kodpfoxpdilox Addodg Please provide reference number upon request: 13829 Description: Spiked hammer with 70 attachment for sale. Okay woodpecker. Leaks a little oil if used for a long time. Ready for delivery Own weight: Model: Pigghammer med 70 feste

Condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece Kdsdpfx Aoud Urxjddeg -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Condition: good (used), Clamping angle for workpiece clamping Kdedpfsb E N Ttjx Addeg -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Condition: used, mileage: 42,000 km, power: 118 kW (160.44 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, Year of manufacture: 2023 Kedpfex E Rlujx Addedg 7-person version with the Insoli System. LIKE NEW.

Condition: used, Manufacturer : SPX APV Kdodpex R A E Refx Addog Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Kodpox R A E Dofx Addedg Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049  

Year of construction: 1996, condition: used, Manufacturer: BSIModel: NGV 70Manufacturing year: 1996Type: containerCapacity: 2000 LMaterial: AluminiumEmptying: butterfly valve Kdodpfx Adox R Ardjdeg Dimensions : 140x115x220 cm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517334H00059, Year of construction: 2017, operating hours: 14,429 h, load capacity: 5,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,970 mm, power: 55 kW (74.78 HP), gearing type: hydrostat, fork length: 2,400 mm, fork width: 150 mm, fork thickness: 60 mm, overall weight: 7,858 kg, empty load weight: 7,858 kg, total height: 2,970 mm, color: silver, Equipment: CE marking, cabin, lighting, sideshift, trailer coupling, Used forklift in operational condition Lifting capacity: 5,000kg Lift height: 4,300mm Power: 55kW Overall length: xx mm Width: xx mm Height: 2,970mm Own weight: 7,858kg Fork length: 2,400mm Fork width: 150mm Fork thickness: 60mm Minimum fork spacing: 570mm (measured externally with forks closed) Maximum fork spacing: 2,020mm (measured externally with forks opened) Mast type: Triplex Side shifter: yes Cabin: yes Road lighting: yes Year of manufacture: 2017 Operating hours: 14,429h Kdodpfx Adswtyubodog Condition: used, ready for operation The forklift can be controlled with great precision and sensitivity. Immediately available from stock! Includes: cabin, lighting, hydraulic side shifter, hydraulically adjustable forks, heating and ventilation for the cabin, CE certificate The forklift can also be rented. Delivery and pick-up within Germany possible with our own truck. Please submit your inquiry or simply call us. We are a family-owned company from Sauerland, official Mima importer, and your contact for service and maintenance of forklifts.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, DECKEL MAHO DMU 70 VL – Technical Specifications General Machine type: Vertical CNC machining center Year of manufacture: approx. 1999 Control: Heidenhain MillPlus Axes: 3 axes (X / Y / Z), optional expansions Machine weight: approx. 13,000 kg Travel distances X-axis: 2,050 mm Y-axis: 520 mm Z-axis: 520 mm Spindle Tool holder: SK 40 Max. spindle speed: 12,000 rpm Spindle power: approx. 30 – 36 kW Kjdpfx Aoyazd Neddedg Spindle drive: Motor spindle Table Table size: approx. 700 × 500 mm Max. table load: approx. 350 kg T-slots: approx. 7 × 14 mm Feeds Working feed: up to 10,000 mm/min Rapid traverse X / Y / Z: approx. 30 – 40 m/min Tool magazine Magazine capacity: 32 tools Max. tool diameter: approx. 105 mm Max. tool length: approx. 315 mm Max. tool weight: approx. 6 kg Power / Installation Total connected load: approx. 30 – 40 kVA Machine dimensions (L × W × H): approx. 5,600 × 3,300 × 2,800 mm ICS (internal coolant supply) and chip conveyor

Condition: used, mileage: 64,000 km, power: 154 kW (209.38 HP), fuel type: diesel, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,320 mm, loading space width: 2,130 mm, loading space height: 2,080 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, Year of manufacture: 2021 Empty weight: 3.904 kg Carrying capacity: 3.096 kg GVW: 7.000 kg Kdodpfxex S I Nke Addjg Cool unit make: Carrier Cargo space outer length: 609 cm Cargo space outer width: 227 cm MOT approved until 05.02.2026 3.0 L Motor Cool unit brand: Carrier

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,614 h, load capacity: 7,000 kg, lifting height: 3,450 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,800 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load centre: 600 mm ISO class: ISO Class 4 = 5,000 – 10,000 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Superelastic Front tyres condition: 80 – 100% Rear tyre type: Superelastic Rear tyres condition: 80 – 100% Description: Completely overhauled, serviced, and inspected in accordance with FEM 4.004 (Safety/UVV) Features: Sideshift, fork positioner, Fork positioner measurements: AA: 1810 mm AI: 1510 mm ZA: 430 mm ZI: 135 mm 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, safety light, joystick, beacon, LED, Kedpjwq Tnpofx Addsdg - Joystick

Condition: used, functionality: fully functional, machine/vehicle number: 0298, Year of construction: 1992, operating hours: 8,340 h, load capacity: 2,500 kg, lifting height: 4,500 mm, mast type: triplex, Diesel forklift Chassis number: 0298 Load center: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 60 - 80% Ksdpfx Adsx Tm Egededg Sideshift, 3rd valve, rear work light, front work light, windscreen, half cabin, exterior mirror, wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 0110, Year of construction: 2019, operating hours: 1,950 h, load capacity: 2,000 kg, lifting height: 3,800 mm, fuel type: gas, mast type: simplex, construction height: 2,400 mm, power: 30 kW (40.79 HP), empty load weight: 3,423 kg, drive type: Treibgas, LPG forklift truck Kjdpfxsx Tm Axe Addsdg Chassis number: 0110 Load centre: 500 ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Sideshift, 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW Kodpfxjw Nhbmj Addedg -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: good (used), 1 set of twist drills Kodpfowz Imujx Addodg 1 x diameter 24 mm 1 x diameter 32 mm 1 x diameter 34 mm 1 x diameter 38 mm 1 x diameter 50 mm 1 x diameter 60 mm 1 x diameter 70 mm (TITEX Plus NEW! Second from the right in picture) 1 x diameter 70 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-kept injection moulding machines from the current year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve - German language - Single owner - machine sourced from Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Kdodpfx Aex Rvcveddog Minimum mould height: 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2500 bar Electrical: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery by arrangement with freight costs reimbursed. Available ex stock Hannover, Germany.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: We also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Kdodpfx Aox Rvcieddjg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and barrel replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator chute - German language - Single ownership – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit: - Clamping force: 400 kN / 40 t - Tie bar spacing: 270 x 270 mm - Platen size: 446 x 446 mm - Opening stroke: 350 mm - Minimum mould height: 200 mm - Maximum daylight between platens: 550 mm - Ejector stroke: 125 mm - Ejector force: max. 30 kN Injection unit: - Screw diameter: 18 mm - Injection volume: 23 cm³ - Shot weight: 21 g - Injection pressure: 2,500 bar Electrical: - Pump: 11 kW - Heaters: 4 zones, 4 kW - Installed power: 15 kW - Main fuse: 50A Weight: 2,150 kg Guarantee: Warranty until initial commissioning Loading/Shipping: Free loaded onto buyer’s truck or delivered to site against transport cost reimbursement Available ex stock Hanover, Germany Further information about our machines and company: - We only sell machines bought for our own stock from ongoing production, directly from our warehouse in Hanover - All machines offered are checked and tested before removal - We do NOT sell insolvency assets – we are NOT intermediaries dealing in third-party property - All machines offered come from successful companies where regular maintenance is a given - All listed machines can be inspected at our warehouse

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW Kdsdevb Hlwopfx Addsg with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: excellent (used), functionality: fully functional, working width: 700 mm, pass-through height: 80 mm, Double-sided roller gluing machine / glue application machine Manufacturer: Bohrer Model: SL 70 Double-sided glue application machine, with disc roller conveyor at the outfeed Working width: 700 mm Passage height: approx. 80 mm Application roller grooved Height adjustment manually via handwheel Kdjdpfx Adjx U T Tyodjg Dimensions approx. 1300 x 600 x 1500 mm (LxWxH, without disc roller conveyor)

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee. Kdsdpfotvfpcox Addsg