Used Itm Antares 70 for sale (12,792)

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,170 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,440 mm, power: 70 kW (95.17 HP), empty load weight: 6,900 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,200 mm, Telescopic handler, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire condition: 0 - 20% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: JCB 530-70 telescopic loader - - - Year of manufacture 2001 - - 7m reach - - 3 tons lifting capacity - - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - mechanical quick coupler - - - 4-cylinder Perkins diesel engine (95 hp) - - Tires are not in good condition - - Windshield has a crack - - - but otherwise in good condition - - including used pallet fork + used bucket (2.2 m wide) Bulk material bucket, double pallet fork, 3rd valve, heater, full cab. Dcedpezx Iq Sefx Apben

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30S00738, Year of construction: 2013, operating hours: 8,506 h, load capacity: 7,000 kg, lifting height: 4,450 mm, construction height: 3,300 mm, fork length: 1,200 mm, empty load weight: 10,410 kg, TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,450 mm Overall height: 3,300 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W x H): 3,550 x 1,980 x 3,300 mm Dead weight: 10,410 kg Transmission: Automatic Djdpfxozmwmlo Apbscn Front tires: Superelastic Rear tires: Superelastic Operating hours: 8,506 h EQUIPMENT 3rd valve 4th valve Full cabin Cabin heater Hydraulic line preparation

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos -Quantity: 64 pieces available Price: per set -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set Dcodpfx Aowca D Iepbon

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 380/70 -Elbe .: 0.107.110.0001 Dedex Ngf Eopfx Apbocn -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 380 mm -Weight: 3.2 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Dcsdpfxev Rahdj Apbon -Manufacturer: Festo, standard cylinder type DGS-25- -Stroke: 70 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Hole diameter: 13 mm -Max. pressure: 12 bar -Dimensions: Ø 33 x 208 mm -Weight: 0.6 kg

Condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm Dodpfx Apsud Urxjbscn -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp Dsdpfx Aoxy H E Djpbecn -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos Dcedpew U T Atefx Apben -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Djdpewuz Ilofx Apbocn -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: crane bolt type d=90x2 8 M48 Dcsdpev Ikniofx Apben -Shaft: Ø 69.5 mm .: 1031 4143 -Number: 5x crane bolts available -Price: per piece -Dimensions: Ø 90 x 248 mm -Weight: 6.9 kg/piece

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope multi-shell grapple, polyp grapple, mechanical multi-shell grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt Lubrication bolt: Crane bolt type M48 -Shaft: Ø 69.5 mm -Number: 3x crane bolts available -Price: per piece -Dimensions: Ø 92 x 345 mm -Weight: 13.2 kg/piece Dcodpfx Apev Ikt Ejbjn

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device Dcsdpfxezrpr De Apbjn hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System retrofitted with R-452A Dodpfeziixxjx Apbecn Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side port: 50 mm / 125 mm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data may be subject to change or error!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Dsdjzh D Ryspfx Apbjcn Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Dcodezh Huhepfx Apbsn Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Dcsdpfxezizl Ds Apbon Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm Dcsdoy Akchopfx Apbjn -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior Dcedpfey Dclwjx Apbjn - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Condition: good (used), Pipe expander, spindle, splined shaft -Splined shaft: Mounting shaft Ø 62 mm Dedpfx Ajhmc Amjpbecn -Key: Outer diameter 60/70/80 mm, adjustable splined shaft cone -Dimensions: see technical drawing in the photos -Overall dimensions: Ø 135 x 445 mm -Weight: 14.4 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 Dcsdpfx Ajmrxanopben -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

Condition: good (used), Year of construction: 2005, Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor Dcedpsk D Nt Isfx Apbjn -Manufacturer: Ell, suction motor from scrubber dryer Gansow 70 BF 70 -Type: 500W -Voltage: 24 V -Quantity: 1 available -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm Dcedpfxeif Huvj Apben -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Condition: good (used), geared motor, electric motor Dcedpfx Apjc U Tygsbsn -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 25 mm -Wave height: 80 mm -Protection class: IP 44 -Dimensions: 445/205/H160 mm -Weight: 18.1 kg

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel -Diameter: 160 mm -Width: 25 mm -Hole: Ø 40 mm Djdpfxob A Ilpe Apbocn -Number: 12 brushes available -Price: per piece -Weight: 0.7 kg/piece

Condition: used, Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive fabric: grain 220 -Diameter: Ø 160 mm - Width: 30mm -Intake: Ø 10 mm -Number: 8x brushes available Dsdpfx Asb A S N Ejpbocn -Price per piece -Weight: 0.4kg/pcs