Used Joiners Circular Saw for sale (5,933)

Condition: new, Sawblade tiltable 0 - 45 ° Length of the rolling table 3.200/3350 mm Lhedpexmk A Tsfx Ac Aeh cutting width 1.100 mm Motor output 5,5 kW Cutting height 155 mm Cutting height at 45° 110 mm Saw blade diameter 450 mm Speed 3.000/3.600/4.200 U/min. Dust suction hood 1x120 , 1x80 mm

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK Lhjdpfey D I Nnex Ac Aeh

Condition: good (used), Year of construction: 1998, Semi-automatic circular saw machine Manufacturer: KASTO, Type: V350 U, Year of manufacture: 1998 with miter cut, roller conveyor, and stop Saw blade diameter: 350 mm Pneumatic clamping device and saw feed Ledpofym Ewjfx Ac Ashh Infinitely adjustable. Machine is in good condition and has seen little use.

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Ledpfx Acotwn E Uo Ashh Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: used, Year of construction: 1980, Circular saw with miter cutting capability. Manufacturer: KALTENBACH, Type: KKS 400 M, Year of manufacture: approx. 1980. Lodeixumvopfx Ac Ajhh Hydraulic feed, infinitely adjustable. Saw blade: 400 mm.

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Ljdpfx Asyyzqdsc Ashh Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: new, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm Ledpfxotg Ailo Ac Ajhh

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm Ledpfor Ilktsx Ac Aehh - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 1988, saw blade diameter max. 450 mm Lodpfjzczf Sox Ac Aohh

Condition: used, Year of construction: 2001, saw blade diameter min. 200 / max. 500 mm Lsdpfx Aozczf Ejc Aohh Speed 2800 / 4000 / 5500 U/min.

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Lodpjzcdn Nsfx Ac Aohh Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Lhsdpfsufgnzex Ac Ajh Scale carriage for cutting angles Table size 1000x630mm

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Lhjdsyyz Txopfx Ac Aeh Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Lhsdpfx Acsyyz Ebo Ash Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: Lhjdpfxsyyzxho Ac Ash - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° Lhsdpjy S Dwwofx Ac Aeh - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW Lhjdpfey Dcrwex Ac Ajh - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm Ledpfx Ajy Dcqyjc Ashh - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V Lhsdpfx Acsy Dcr Dj Ajh - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars Ledpfx Acey Dcu Ee Aehh - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45° Lhodpezfn E Aofx Ac Ash

Condition: used, Bore diameter: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm Ledpfx Acjlf I D Ee Ashh - like new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar.

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm Lsdpfezc I Sxjx Ac Aehh - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2025, New display machine! Including 3-axis control Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment General features of the P 450: Sliding table made of anodized aluminum, including high-precision guide rail made from hardened and ground steel Sliding table can be locked in any position Saw blade guard with swivel-away function Extension arm with adjustable mitre stop and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrics and safety devices according to CE standards Technical data: Saw blade tilting: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding table dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Lhsdpfx Acjwvcf Uo Ajh Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP 2 extraction ports Mitre stop extendable to 3,600 mm Location:

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Ljdpfx Ajywnvnec Aehh Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg