Circular metal sawing machine

RURACK VS 300

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm Nsdpfx Afolb I Daewewk capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: used, Year of construction: 1997, machine/vehicle number: 5284, Offer 26156 Technical data: - Maximum turning diameter 120 mm - Distance between centers 450 mm - Maximum turning diameter over carriage 250 mm - Spindle bore 23 mm - Spindle nose with threads according to DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feed rates – longitudinal 0.03 - 3.0 mm - radial 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - Includes: - 3-jaw chuck - Quick-change tool holder Multifix with 3 inserts - Live center - Collet set Nwsdszf Ag Uspfx Afwok

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator Nwjdpedzqb Ejfx Afwjk - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. Nwodpfx Afsxx Ta Ejwsk The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Weight: 957 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: Nsdpju Tuk Hsfx Afwswk - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling Nwjdpfx Ajmhm Aqefwsk

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling Nedogxi D Tspfx Afwowk

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Nsdpfx Afsga T Eiewowk Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Nwedourc S Rjpfx Afwok Automatic cooling

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) - Automatic cooling system Njderrvn Aepfx Afwewk - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein