Used Knee And Column Milling Machine for sale (89,236)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 Tjdpfx Adeh U Nvkeiof MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 1978, x-travel 820/850 mm Todpfx Adjxxb Htoiof y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Further techniscal detals please consider pictures

Year of construction: 1982, condition: used, x-travel 970 mm y-travel 420 mm z-travel 430 mm Control Heidenhain TNC 135 Todpfxek H R H Us Adisf number of speeds 12 speeds 31,5-1400 U/min feed range lengthways and crosswise 8-2000 mm/min feed range - vertical 4-1000 mm/min rapid traverse longitudinal and cross 4 m/min rapid traverse Z-axis 2 m/min table-size ca. 1300 x 350 mm weight of the machine ca. ca. 3,8 t dimensions ca. 3050x2350x2320 mm

Condition: excellent (used), travel distance X-axis: 22,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 22,000 mm, table width: 2,000 mm, rotary table diameter: 2,000 mm, Double-column milling machine Technical Data Travel paths per machine • X-axis (bed): 22,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (spindle carrier horizontal): 1,500 (1,200) mm Control • CNC control: Heidenhain TNC 430 Automatic tool changer • Tool robot • 90 magazine positions Universal milling head in orthogonal design • Swivel range toolholder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm 2x chip conveyors • Discharge height above floor: 1,250 mm • Feed length: 24,000 mm Table field • Clamping area: 22,000 x 2,000 mm Rotary table • Clamping area: diameter 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system upgrades. Services: - Used machines - Spare parts Tjdpfx Aowi Iaqjdiof - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine (alt. spelling) - used CNC milling machine - used drill-milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining (alt. spelling) - large part machining - CNC large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken. Tjdpfx Aov Sfk Hjdief

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Tedpsu Dahnofx Adief Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Tsdpfoxpgf Nsx Adief Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit Tsdpfx Ajxzzlhsdisf - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Tjdpfx Asuv Hrdedijf Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: reconditioned (used), Year of construction: 2002, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, 100% Retrofit by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2002 Control: Heidenhain TNC 640 / TNC 7 Travel: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range: 20–4,000 rpm Feed rates: X, Y & Z axes (mm/min): 2–12,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 15,000 Milling head: Automatic milling head, orthogonal H10, 1° pitch Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle KW37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ) - Chip conveyor, floor ejection - Ergonomic operator platform - Hazardous area protection - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on complex foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, rolling bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. Tsdpfsv S Upfjx Adisf We equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You receive a state-of-the-art machine combined with significant CO₂ savings.

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Tedpfx Adexwdygeisf Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Todpfxsvrv Sue Adijf Control and Motors: Two HEIDENHAIN TNC 640 digital CNC controls – one at the machine’s front, one at the rear in the cabin HEIDENHAIN package (motors, measuring systems and portable handwheel) Additional equipment: Tool changer with double gripper, 60 stations Double hinge-belt chip conveyor (longitudinal), one in front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Tedpfx Aswxz D Usdief Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: used, Year of construction: 2002, Technical details: x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm spindle taper ISO: 50 spindle turning speed range: 22 - 4000 U/min rapid traverse: 24 / 36 m/min main drive: 37 kW total power requirement: 50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor Tedev Uzt Aopfx Adief *

Year of construction: 1998, condition: like new (used), Retrofitted: 2025 Tedpfxsv D Rxmj Adijf Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 7650 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 5850 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrates: 20 - 5000 mm/minRapid feedrates (X-Y-Z): 10000 mm/min Weight and dimensions Maximum weight on table: 4000 kg/m2Machine weight approx.: 31000 kgMachine dimensions approx.: 11590 x 5179 x 3485 mm Accesories Pherimetral guarding and new perimeter safety fenceAutomatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: New HR-510External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Tsdpfx Adjv R Hwroiof Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 high range rpm 1,200 - 4,000 Axis drives/axis feeds: Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.

Condition: used, Year of construction: 1998, travel -x axis 5.000 mm travel -y axis 2.800 mm travel -z axis 1.500 mm control HEIDENHAIN TNC426CB number of spindle speeds 20 - 3.000 U/min Todpfoxrvl Dex Adief table length 4.000 mm table width 2.000 mm max. table load 20.000 kg tool taper ISO SK50 numbers of positions in the tool changer 100 Dimensions (L x W x H) 9.800 x 6.200 x 7.100 mm machine weight ab. 31.600 kg Travelling column milling machine | SORALUCE - FS-5.000 The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FS 5.000 | FS5.000 | FS 5000 | FS5000

Condition: refurbished (used), Year of construction: 2000, KEKEISEN Universal Bed Milling Machine UBF-R 2000/13, machine no. F42460; year 2000 well maintained, very good condition, mechanically overhauled 2023 2-axis universal head automatically swivelling, Toderm Sigjpfx Adief with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1200 mm Vertical travel of the headstock (Z-axis) 1300 mm Rotary table size 1260 x 1260 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 4000 kg Spindle power 30 kW (100%ED), max. torque 1200 Nm Spindle speed 20 - 4000 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 12 m/min rapid traverse CNC control Heidenhain TNC 426M with electric handwheel HR 410 Drive systems make Siemens Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 270 litre collecting tank Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 50 kVA without installation elements (fixators), without assembly and commissioning Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Tsdpfx Adsxpgfveief Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 1600 mm Travel Z-axe (Height): 900 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 20 > 3000 rpm

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW Todsvmzihepfx Adijf total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: good (used), Year of construction: 1988, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Total power requirement: 20 kW Machine weight approx.: 7 t Space requirement approx.: 7 linear meters Tedpfx Adjxzfikeief

Condition: reconditioned (used), Year of construction: 2016, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2016 Capacities / Travel distances: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: units: 7 Tedsxvx Amopfx Adief Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup Blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Type A Main drive: Drive power: 100% duty cycle 43 kW Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y, and Z axis 35,000 mm/min Base area SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, Diagonal H207 Adapter angle milling head SK50 with Hirth gearing Automatic tool changer, 60 magazine places Chip conveyor Preparation / integration of NC rotary table Adaptive control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. The machines offered in this line are procured by us through a strict selection process and undergo a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified defects or faults are professionally repaired by our expert service team.

Condition: used, Year of construction: 1998, x-travel 4.300 mm y-travel 1.200 mm z-travel 1.500 mm control Heidenhein TNC 426 PB Tsdpfxexvtgae Adisf table-size 6.120 X 1.000 mm taper ISO ISO-50 Number of revolutions 20 - 3.000 rpm work speed 5.000 mm/min handwheel HEIDENHAIN HR-410 table weight 20.000 Kg Tools changer 40 fach/tools rapid traverse 12.000 mm/min weight of the machine ca. 28 t

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing of spindeldiameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht van machine + draaitafel: 200 ton 4 geharde geleiders geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Max speedrange: 1,5 > 1200 rpm Tjdsxpgf Aepfx Adijf

Condition: used, Year of construction: 2008, Technical details: x-travel: 6500 mm y-travel: 1400 mm z-travel: 1000 mm table surface area: 7000 x 1100 mm milling head speed: 15 - 4000 U/min spindle taper ISO: 50 rapid speed: 20 m/min Tjdpjvmz I Rofx Adisf feed speeds: 1 - 10000 mm/min total power requirement: 75 kW weight of the machine ca.: 30 t with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 autom toolchanger 100-pockets through spindle coolant 30 bar chip conveyor *