Used Knee And Column Milling Machine for sale (97,127)

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Work table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel distance X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 96 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Positioning accuracy Positioning accuracy X-,Y-axis to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 2x 24-fold Design as disk magazine - Tool positions 16 - Tool shank (DIN 69871 / 69872) SK 40 Iedpfx Asw E Ey Hsg Njbc - Max. tool diameter Tool diameter mm 76 - Max. Tool length mm 300 - Max. Tool weight kg 8 Machine control Heidenhain TNC 426 Splash guard cladding Covering of the entire work area, designed as partial area protection in accordance with the valid guidelines of the German accident prevention regulations (UVV) and the European standard EN 12417, with manually operated work area door including electrical protection and interlock. Machine door with polycarbonate glazing. 30 bar high-pressure coolant unit (IKZ) for the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar complete with separate paper band filter. Internal cooling is also possible with air Clean tank capacity l 500 Degree of filtration my 30 Filter capacity l/min. 120 Hinged belt chip conveyor instead of the chip collection tray with integrated coolant tank, ejecting to the right Discharge width approx. mm 300 Discharge height approx. mm 1050 incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump capacity bar 2.0 HR 410 HEIDENHAIN hand-held control unit External hand-held control unit with built-in electronic handwheel, connected to the machine via cable, for manual movement of the axes, with emergency stop button Grease - central lubrication documentation Operating and programming instructions Hydraulic and pneumatic diagram Circuit diagram Test log

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Iodjwhd Alopfx Ag Nobc

Condition: ready for operation (used), total height: 3,580 mm, total width: 3,452 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 24 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Power on spindle: 30 kW Ibjdpfxswaiuko Ag Njc Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: like new (used), Year of construction: 2014, 1 as-new CNC travelling column bed type milling machine Manufacturer: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Table clamping surface: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Isdpfxswzx Nts Ag Nebc Tool magazine Controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Through-spindle coolant (IKZ) Indexing clamp Vertical carousel rotary table D=1600 mm: 250 rpm Clamping field 6000 x 2000 mm Planing slide, etc.

Condition: good (used), Technical data: Ibedpfxetq Tnbs Ag Noc - Longitudinal stroke: 3,500 mm - Slide stroke: 1,100 mm - Vertical travel: 1,500 mm - Table dimensions: 3,800 x 1,000 mm - Spindle taper: ISO 50 - Spindle speed: 5,000 rpm - Tool changer: 40 places - CNC: SELCA S 4045 PDH

Condition: used, Year of construction: 2014, - - - - - travels - - - - - - - - - - - travel -x axis 10.000 mm travel -y axis 1.500 mm travel -z axis 4.000 mm - - - spindle - - - - - - - - - output 62.5 kW turning speed range 262 - 4.000 U/min Torque 2.280 Nm - - - table - - - - - - - - - Size of table plate 2x (2.500 x 3.000) mm longitudinal travel 2.000 mm max. load 30.000 kg solution 0,0005 ° solution 1,8 sek. table turning speeds 1,5 U/min - - - further technical details - - - - - - control Siemens 840 Dsl numbers of positions in the tool changer 80 tool taper ISO 50 max. feed 25.000 mm/min - - - T-slots - - - - - - - - - size of T-slots (DIN 650) 28 mm T-slot - distance 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. Ibodpfxjwrztvj Ag Njc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system Isdpfx Agshhuf Hj Njbc - Bele

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS Isdpfxju Sppws Ag Nobc MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: ready for operation (used), total height: 3,900 mm, total width: 2,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, empty load weight: 13,000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Ibodpfov St Efsx Ag Njc Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Year of construction: 2007, condition: ready for operation (used), A CNC travelling column milling machine Sachman is available. Travel path X/Y/Z: 6000mm/1400mm/2000mm, speed: 5000rpm, power: 37kW, torque: 1195Nm, tool positions: 80, tool holder: SK50, rotary table dimensions X/Y: 1600mm/2000mm, max. table load: 15000kg, plate clamping area X/Y: 4000mm/2000mm, head change station: 4, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. Iodpfxjw H Sccs Ag Nsbc

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: Iodpfxjvn N Hdo Ag Njbc >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Ibodporx Rtrefx Ag Nec Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 600 mm z-travel 800 mm Control Heidenhain TNC 426 tool changer for ... units 48 turning speeds 9000 U/min feed 3000 mm/min rapid traverse 30 m/min spindle turning speed range max. 9000 U/min tool taper SK 40 total power requirement 15 kW direct spindle power: 11 kW (can be increased by the manufacturer, costs must be paid by buyer) Ijdpfx Ajvzhc Rsg Nsbc svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door the clamping device shown in the pictures is not included in the scope of delivery!

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Iodpowdub Defx Ag Nebc Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position > Drive power 28 kw Iodsm Twc Tjpfx Ag Nsbc > Weight 12 to

Condition: used, Year of construction: 1999, x-travel 5.850 mm Ijdpfxewxfnkj Ag Nsbc y-travel 1.200 mm z-travel 2.000 mm control HEIDENHAIN TNC 430 D table-size 6.120 x 1.000 mm table weight 20.000 Kg internal coolant system feed 20 bar Chip coveyor inkl. handwheel HEIDENHAIN HR-410 Tools changer 60 fach/tools taper ISO ISO 50 engine output 30 kW working speed 5.000 mm/min rapid taverse 12.000 mm/min Number of revolutions 20 - 3.000 rpm total power requirement 41 kW weight of the machine ca. 31 t

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65039, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine Generally overhauled 2023 Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Iodpfx Agswv Nl Uj Nebc Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 24-way tool magazine mounted on the right-hand side of the traveling column - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530 optional 620

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 12,000 mm, table width: 2,000 mm, Travelling Column Milling Machine Technical Specifications Travel ranges • X-axis (bed): 12,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (spindle head horizontal): 1,500 (1,200) mm Controller • CNC control: Heidenhain TNC 430 Automatic tool changer • Tool robot • 90 magazine positions Universal milling head in orthogonal design • Swivel range, milling head mount: 360 x 1 degree • Swivel range, milling head: 180 x 1 degree • Tool interface: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Chip conveyor • Discharge height above floor: 1,250 mm • Conveying length: 12,000 mm Table area + rotary table • Clamping surface: 13,000 x 2,000 mm, including rotary table with a clamping surface of 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as control retrofits. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofits _____ _____ _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – cnc milling machine used – drill milling machine used – used metal milling machine – metal mill used – used metal milling machine – used cnc mill – cnc milling machines – large part machining – cnc large part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine Ibedpewuy Udefx Ag Nsc

Year of construction: 1989, condition: used, x-travel 1100 mm y-travel 600 mm z-travel 500 mm Control Heidenhain TNC 335 B* tool taper SK40 table surface - upper 1650 x 700 mm table face - lower 1870 x 300 mm spindle speed: 3000 Upm spindle motor ca. 9 kW control defekt!!!!! Ibodpfx Agsd Ih Rxe Nsc Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) Ijdpfxew Eb Its Ag Nobc - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: reconditioned (used), Year of construction: 2002, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, 100% Retrofit by Dornhöfer The Difference. Isdpfx Agov S Upfo Njbc Including installation and commissioning! Year of manufacture: 2002 Control: Heidenhain TNC 640 / TNC 7 Travel: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range: 20–4,000 rpm Feed rates: X, Y & Z axes (mm/min): 2–12,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 15,000 Milling head: Automatic milling head, orthogonal H10, 1° pitch Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle KW37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ) - Chip conveyor, floor ejection - Ergonomic operator platform - Hazardous area protection - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on complex foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, rolling bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. We equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You receive a state-of-the-art machine combined with significant CO₂ savings.

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Travel distances Axis-X 2000 mm Axis-Y 1000 mm Axis-Z 1100 mm Machine bed Table length 2200 mm Table width 850 mm Spindle motor drive Spindle speed 60-3000 rpm Motor power 38 Kw Tool holder ISO 50 Rapid traverse and feed Feed range: X-axis 20000 mm/min Ijdpeuzwpdefx Ag Nsbc Y-axis 20000 mm/min Z-axis 20000 mm/min Accessories Chip conveyor

Year of construction: 2018, condition: like new (used), Manufacturer: AXA Type: VCC50 Year of manufacture: 2018 read operating hours (h): 6,332, Serial no.: 87844, X travel: 1,350 mm Y travel: 750 mm Isdpfx Aeh Eg Ebsg Njbc Z-travel: 850 mm distance table - spindle nose: 180 - 1.030 mm B-axis additional C-axis (conversion to A-axis theoretically possible), rapid traverse (X/Y/Z): 25/25/20 m/min surface of clamping table: 2.050x850 mm max. table load: 800 kg/m² 5 tN tool changer 22-fold tool holder SK 50 max. tool length: 400 mm max. tool weight: 15 kg max. feed force: 9.000 N main spindle: 6.000 rpm spindle arrangement: vertical control SIEMENS 840 D SL full protection cabin with sliding door swivel spindle Chip conveyor NC rotary table RTA4S-630 2 clamping jaws Paper belt filter system oil mist extraction electr. handwheel machine weight: 17.500 kg machine dimensions: 2.600 x 2.400 x 3.100 mm

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 10,000 mm, table width: 2,000 mm, Travelling Column Milling Machine Technical Specifications Travel Axes • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal ram): 1,500 (1,200) mm Control • CNC control: Heidenhain TNC 430 Automatic Tool Changer • Tool robot • 90 magazine slots Universal Milling Head in Orthogonal Design • Swivel range tool holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Chip Conveyor • Discharge height above floor: 1,250 mm • Feed length: 10,000 mm Table • Clamping area: 10,000 x 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business focuses on tool milling machines. Our services include spare parts delivery, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts Iedpfx Aswuy Nbsg Nebc - Customer service - Machine service - Machine overhauls - Control modernization _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - milling machine - large workpiece machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 Ibjdev R Hwrjpfx Ag Noc high range rpm 1,200 - 4,000 Axis drives/axis feeds: Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.