Used Kotz Und Soehne for sale (5,454)

Condition: ready for operation (used), Siemens 1FK7063-5AF71-1EG5 synchronous servomotor, serial number: YFR123002204008. The item has been inspected and tested. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nwodpfx Aoi D Rqdeg Tsh

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Nsdpfx Aeu Dzq Rjg Tewh Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet rack crossbeam: Rack system: Nedcon Type: NS Included in the scope of supply: 01x Pallet rack crossbeam, used including internal support angle Angle width: approx. 20 mm Nwsdpoh Et Snjfx Ag Tsh Angle length: approx. 2,170 mm Angle rail width: approx. 18 mm Angle rail length: approx. 2,170 mm Max. chipboard thickness: approx. 38 mm Material color: orange Box profile: 90x40 mm Clip: 4HK (hook) Clear width: approx. 2,250 mm 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting Note: An angle rail is welded to the crossbeams (Angle rail - width: 18 mm / material thickness: 2.00 mm) General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all rack systems Delivery with our own fleet (without unloading)

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Njdperg D Awofx Ag Towh Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, maximum load weight: 22,580 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 11/2022, next inspection (TÜV): 11/2026, loading space length: 11,025 mm, loading space width: 2,490 mm, loading space height: 2,725 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, KÄSSBOHRER 2-axle city box semi-trailer with liftgate First registration 11/2022 German registration, first owner Dimensions (L x W x H): 11,025 x 2,490 x 2,725 mm Loading height: 2,675 mm Unladen weight: 7,420 kg Payload: 22,580 kg Fifth wheel height: 1,150 mm BPW axles with large disc brakes, 430 mm 2nd axle with forced steering system TRIDEC Tires: 4 x 385/55 R 22.5 with tread depth 10 mm ALCOA aluminum rims, Dura-Bright, high-gloss finish WABCO trailer EBS with RSS stability program Air suspension with lift/lower function JOST crank fifth wheel, full load capacity Body: LaSi certificate, Code XL Steel front wall, KTL coated Side walls: Plywood Floor: 30 mm phenolic resin-bonded plywood, forklift axle load max. 7,200 kg Wear plate, steel, 600 mm at the rear Nwedpfszfxadsx Ag Tjh Steel rear portal frame Doors: smooth design (fully foldable), with door latch, 4 double-hinge hinges per door leaf and 2 recessed swivel bar locks made of stainless steel White roof made of GRP with 4 integrated LED lamps 2 LaSi rails, right and left, mounted on the side walls Underride guard with DHOLLANDIA DHSMR30 liftgate, lifting capacity 2,500 kg, loading platform length 1,700 mm, with 2 roll stops BDL lock RENTING is the new BUYING; with us, it is also immediately available as a full-service rental.

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We are offering the following used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please send us a message or call us. No. Cart Type Condition Width/Depth/Height 400 Peel board cart VTR 10.12,5.08 2 865 875 1980 401 Peel board cart VTR 10.12,5.08 2 865 875 1980 402 Peel board cart VTR 10.12,5.08 2 865 875 1980 403 Peel board cart VTR 10.12,5.08 2 865 875 1980 404 Peel board cart VTR 10.12,5.08 2 865 875 1980 405 Peel board cart VTR 10.12,5.08 2 865 875 1980 406 Peel board cart VTR 10.12,5.08 2 865 875 1980 407 Peel board cart VTR 10.12,5.08 2 865 875 1980 408 Peel board cart VTR 10.12,5.08 2 865 875 1980 409 Peel board cart VTR 10.12,5.08 2 865 875 1980 410 Peel board cart VTR 10.12,5.08 2 865 875 1980 411 Peel board cart VTR 10.12,5.08 2 865 875 1980 412 Peel board cart VTR 10.12,5.08 2 865 875 1980 413 Peel board cart VTR 10.12,5.08 2 865 875 1980 414 Peel board cart VTR 10.12,5.08 2 865 875 1980 415 Peel board cart VTR 10.12,5.08 2 865 875 1980 416 Peel board cart VTR 10.12,5.08 2 865 875 1980 417 Peel board cart VTR 10.12,5.08 2 865 875 1980 418 Peel board cart VTR 10.12,5.08 2 865 875 1980 419 Peel board cart VTR 10.12,5.08 2 865 875 1980 420 Peel board cart VTR 10.12,5.08 2 865 875 1980 421 Peel board cart VTR 10.12,5.08 2 865 875 1980 422 Peel board cart VTR 10.12,5.08 2 865 875 1980 423 Peel board cart VTR 10.12,5.08 2 865 875 1980 424 425 426 Baking cart VTR 10.12,5.10 2 1065 650 1930 427 Baking cart VTR 10.12,5.10 2 1065 650 1930 428 Baking cart VTR 10.12,5.10 2 1065 650 1930 429 Baking cart VTR 10.12,5.10 2 1065 650 1930 430 Baking cart VTR 10.12,5.10 2 1065 650 1930 431 Baking cart VTR 10.12,5.10 2 1065 650 1930 432 Baking cart VTR 10.12,5.10 2 1065 650 1930 433 Baking cart VTR 10.12,5.08 2 1065 650 1930 Njdjzf Hiajpfx Ag Towh 434 Baking cart VTR 10.12,5.08 2 1065 650 1930 435 Baking cart VTR 10.12,5.08 2 1065 650 1930 436 Baking cart VTR 10.12,5.08 2 1065 650 1930 437 Baking cart VTR 10.12,5.08 2 1065 650 1930 438 Baking cart VTR 10.12,5.08 2 1065 650 1930 439 Baking cart VTR 10.12,5.08 2 1065 650 1930 440 Baking cart VTR 10.12,5.08 2 1065 650 1930 441 Baking cart VTR 10.12,5.08 2 1065 650 1930 442 Baking cart VTR 10.12,5.08 2 1065 650 1930 443 Baking cart VTR 10.12,5.08 2 1065 650 1930

Condition: used, mileage: 166,794 km, power: 74 kW (100.61 HP), first registration: 07/2012, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Engine warning light, possibly related to the particulate filter * Trailer coupling, special equipment: Rear wing doors with glazing, load compartment partition, high, behind driver and passenger, with window (deformable for driver's seat back) Nsdpfx Agezdwtmo Towh Additional equipment: Airbag, driver's side, turn signal integrated into exterior mirror, city lights, double locking system, tachometer, electronic differential lock (EDS), driving assistance system: hill start assist, rear wing doors (opening angle 180 degrees), heater with recirculation, body variant: medium-height roof, headlight range adjustment, engine 2.2 L - 74 kW TDCi CAT, production facility: Otosan, wheelbase 3300 mm, wheel covers, low emissions according to emission standard Stage 5 / Euro 5, sliding door, cargo/passenger compartment, right-hand side, mud flaps, front and rear, seat package 22: driver's seat (3-way adjustable) - passenger double seat, tinted glazing, lining in the cargo/passenger compartment: hard fiber.

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg Nwsdpoyxxzwefx Ag Tsh - immediately available -

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Nwodpfx Agjk H Ic Us Teh Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Nedpfx Agjzdty No Tjwh Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: used,

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Nwodpfx Aexw S Ixeg Tjh Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: used, mileage: 282,100 km, power: 188 kW (255.61 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, color: white, gearing type: mechanical, emission class: euro5, * VDL hooklift truck with flatbed + tarpaulin and tail lift body * Radio * Air conditioning Nedpfx Asxhbkqog Tjwh * 3-seater * Manual transmission * 2nd axle steered * Flatbed with tarpaulin body and tail lift, electric side curtain -----Internal vehicle number: 11365 + 11365a1 + 11365a2----Errors & intermediate sale excepted WhatsApp support available! If you have questions about the vehicle or want further information, feel free to contact us conveniently via WhatsApp Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data Manufacturer: HERPASA Year: 2000 Tank Type: Self-emptying vertical tank / autovaciante tank Application: Wine / beverage processing Capacity: 30,000 liters Material: Stainless steel AISI 304 / AISI 316 Tank Diameter: approx. 2,800 mm Total Height: approx. 7,050 mm Bottom Cone Angle: 45° Cooling System: Upper and lower cooling jackets Upper Cooling Jacket Surface: approx. 8.35 m² Lower Cooling Jacket Surface: approx. 4.4 m² Cooling Jacket Connections: R 3/4" water inlet / outlet Temperature Measurement: Thermometer, range 0 to +60°C Probe Connection: R 1/2" sleeve Discharge System: Bottom discharge with extraction system Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism Access Doors: Rectangular manways / inspection openings Connections: NW50 and NW65 product connections Safety Equipment: Safety valves 2 1/2" Installation: Group of vertical stainless steel tanks with external pipework Condition: Used, installed in industrial winery environment Nwjdpfx Agsy Uc A Re Teh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange Nwedezf E Hqjpfx Ag Tjh - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear Nwodpfxszf E Dvj Ag Toh - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, mileage: 115,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 6040D ----Why autonext GmbH?---- One of the largest commercial vehicle exhibitions nationwide Over 400 vehicles immediately available Largest selection - Best price More than 1,000 satisfied customers every year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition!---- 1st owner, German vehicle, non-smoker vehicle Fully documented service history exclusively at Mercedes Benz Next service due in 631 days As-new rear brakes As-new all-season tires front and rear Loading lift system SPS for loading and unloading Save and Rescue: Loading lift system for personnel protection, TÜV certified according to DIN EN 795 up to 14 KN, EN 365 and TS 16415 Sortimo workshop interior fit-out Rear-wheel drive On request, we offer you retrofit installation of a tow bar for only €599, and if possible, an increase in towing capacity up to 3.5t ----Special Equipment:---- * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multi-function steering wheel * Park package with reversing camera * Reversing camera * 2nd battery (auxiliary battery) in cabin * Passenger side airbag * Acoustic package * Armrests on driver and passenger door * Mounting rails for roof rack * Driver-optimized gearshift console (without storage compartment, right center console) * DAB tuner (digital radio) * Entry handle rear right pillar * Chassis: Stabilization Level II * All-weather floor mats * Vehicle without chassis lowering * Cruise control * Rear door (opening angle 270 degrees) * Wooden cargo area floor Njdow Ndtxspfx Ag Tjwh * Terminal strip for electrical connections (driver's seat base) * Regulated air conditioning (Tempmatik) * Cable duct at rear portal * Cable duct at side wall * Side marker lights * Navigation system for multimedia system MBUX * Programmable special module * Tire pressure monitoring system * Spare wheel matching vehicle tires * Spare wheel carrier under rear frame incl. jack * Windscreen wipers with rain sensor * Rear mud flaps * Front mud flaps * Passenger side seat belt system with warning driver's seat, comfort headrest * Passenger compartment: dual passenger seat * Passenger compartment: heated passenger seat * Passenger compartment: heated driver’s seat * Passenger compartment: driver’s seat with lumbar support * Passenger compartment: comfort suspension seat, driver’s side * Passenger compartment: low driver’s seat base * Red fuel filler cap * Additional relay with second battery * Rear door step * Cargo/passenger area lining: tall wood (up to roof) * Cargo/passenger area lining: wheel arch lining (plastic) * Rear wall lining * Cargo area lashing rails – side wall at waistline * Cargo area lashing rails – side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Driver's compartment thermal insulation * Cargo/passenger compartment thermal insulation * Additional (air) heater, electric * Additional (hot water) heater * Additional heat exchanger * Intermediate stopper sliding door in cargo area Standard equipment: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver side airbag, anti-lock braking system (

Condition: used, mileage: 115,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 6040X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available. Largest selection – Best prices. More than 1,000 satisfied customers per year – Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition! 1 owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service in 631 days As-new rear brakes Njdow Ndt Sopfx Ag Tewh As-new all-weather tires front and rear Loading lift system SPS for loading and unloading Save and Rescue: Loading lift system for personnel protection, TÜV certified to DIN EN 795 up to 14 KN, EN 365, and TS 16415 Sortimo workshop interior Rear-wheel drive Upon request, we offer retrofitting a tow bar for only €599; if possible, also an upgrade for towing capacity up to 3.5t ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Park package with reversing camera * Reversing camera * Second battery (auxiliary battery) in the cabin * Passenger-side airbag * Acoustic package * Armrest, driver and passenger door * Mounting rails for roof rack * Optimized shift console for passenger (without storage compartment on right center console) * DAB tuner (digital radio reception) * Entry grab handle on rear right C-pillar * Chassis: Stabilization level II * All-weather floor mats * Vehicle without lowering * Cruise control * Rear door (opening angle 270 degrees) * Wooden floor in cargo area * Terminal strip for electrical connections (driver's seat base) * Regulated air conditioning (Tempmatik) * Cable duct at rear portal * Cable duct on side wall * Side marker lights * Navigation system for MBUX multimedia system * Programmable special module * Tire pressure monitoring system * Full-size spare wheel * Spare wheel holder under rear frame incl. jack * Windshield wipers with rain sensor * Mud flaps rear * Mud flaps front * Seatbelt system with warning system (passenger side) * Seat equipment: Comfort headrest, driver's seat * Cab seats: double passenger seat * Cab seats: heated passenger seat * Cab seats: heated driver’s seat * Cab seats: driver’s seat with lumbar support * Cab seats: comfort suspension seat, driver’s side * Cab seats: low-profile driver’s seat base * Red fuel cap * Additional battery split relay * Rear door step * Cargo/passenger compartment lining: high wood paneling (up to roof) * Cargo/passenger compartment lining: wheel arch lining (plastic) * Rear panel lining * Lashing rails in cargo space - side wall at belt line * Lashing rails in cargo space - side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Thermal insulation, cab * Thermal insulation, cargo/passenger compartment * Additional (air) electric heater * Auxiliary heater (hot water) * Additional heat exchanger * Intermediate restriction sliding cargo door Standard equipment: 3rd brake light, storage compartment above windshield, storage compartment below instrument panel on passenger side, adaptive brake light, driver airbag, anti-lock braking system (

Condition: used, mileage: 537,942 km, power: 184 kW (250.17 HP), first registration: 06/2015, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, emission class: euro6, loading space length: 7,130 mm, loading space width: 1,630 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, soot filter, tail-lift, Hello! We are pleased to welcome you to our company. We hereby offer you the vehicle with the following equipment: Please leave us your telephone number in your message! * Engine 6,9 Ltr. - 184 kW Diesel * Wheelbase 4775 mm * Disc brakes * Permissible gross weight 15.00 t * Emergency Brake Assist * Comfort driver's seat * Automatic air conditioning * Combi tank - 220 liters of diesel + 20 liters of urea solution (AdBlue) * Sound system * Fog lights with cornering light * MAN-Tronic on-board computer * Compressed air connection at the front * EURO 6 engine * 9-speed gearbox - type: ZF 9 2-chamber system, both freezer and fresh service (up to -20g) Dimensions large chamber: Width: 1.63m Length: 7,13m Height: 2.30m Dimensions small chamber: Width: 63cm Length: 7,13m Height: 2,30m Our services: Nsdpeuirg Dofx Ag Tewh - Fresh TÜV+ASU - Retrofitting of parking sensors - Germany-wide delivery - Test drive possible at any time - Attractive financing conditions - Vehicle deposit Opening hours also on Sunday by appointment TEL:

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Brakes: disc Axle: BPW + air suspension 2x landing legs (JOST) Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale. Nwodpowgghnjfx Ag Tjh

Condition: used, mileage: 24,320 km, power: 169 kW (229.78 HP), first registration: 08/1994, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 1992, Equipment: air conditioning, all wheel drive, crane, Int. No.: 182 Very well-maintained, former fire department vehicle, MAN 4x4 with crane * MAN * 4x4 wheel configuration * Fire department equipment truck * Permissible weight 17,000 kg * WINCH TRUCK * TOWING HOOK * LIGHT MAST * CRANE Palfinger PK 8000 * Hydraulic extension + 2x manual (additional manual extensions available at an extra charge) * Support * WINCH CRANE * Outreach, see load chart * Suspension: leaf spring/leaf spring * Differential locks * Central locking * 3-seater * Radio * Registered as a special vehicle * Therefore, has an environmental badge (allowing access to low-emission zones) * Tires approx. 90% * First owner * Inspection booklet complete * Demonstrable! Nwjdpfxszgqbvs Ag Tjh Trade-in possible Financing from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typing and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request. Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!

Condition: used, mileage: 24,320 km, power: 169 kW (229.78 HP), first registration: 08/1994, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 1992, Equipment: air conditioning, all wheel drive, crane, Int. No.: 182 Very well-maintained, former fire department vehicle, MAN 4x4 with crane * MAN * 4x4 wheel configuration * Fire department equipment carrier * Permissible weight: 17,000 kg * WINCH TRUCK * TOWING HOOK * LIGHT MAST * CRANE Palfinger PK 8000 * Hydraulic main arm + 2x manual (additional manual extensions available at an extra charge) * Support * WINCH CRANE * Outreach: see load chart * Suspension: leaf spring/leaf spring * Differential locks * Central locking * 3-seater Njdszgqb Nspfx Ag Tewh * Radio * Registered as a special-purpose vehicle * Therefore, it has a green environmental badge * Tires: approximately 90% remaining * First owner * Inspection booklet complete * Ready for inspection!!! Trade-ins possible Financing available from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed features must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany possible upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, mileage: 24,320 km, power: 169 kW (229.78 HP), first registration: 08/1994, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 1992, Equipment: air conditioning, all wheel drive, crane, Int. No.: 182 Very well-maintained, former fire department vehicle, MAN 4x4 with crane * MAN * 4x4 wheel configuration * Fire department equipment truck * Permissible weight 17,000 kg * WINCH TRUCK * TOWING HOOKS * LIGHT MAST * CRANE Palfinger PK 8000 * Hydraulic main boom + 2x manual (additional manual extensions available at extra cost) * Support legs * WINCH CRANE * Reach, see load chart * Suspension: leaf spring/leaf spring * Differential locks * Central locking * 3-seater * Radio * Registered as a special vehicle * Therefore, it has a green environmental badge * Tires approximately 90% tread * 1st owner * Inspection book complete * Ready for inspection!!! Trade-in possible Financing available from 4.99% Errors and prior sale excepted! Nsdezgqb Aepfx Ag Tjwh The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany available upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, Year of construction: 2021, operating hours: 5,400 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version Njdpfxeytadhs Ag Tewh * with ripper The machine has only 5,400 operating hours and is in like-new condition.

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg Nodpfx Asyy Hvxsg Towh