Used Label Print Hot Foil for sale (11,552)

Condition: used, Year of construction: 2007, Technical Specifications: Printing process: Wet offset Number of printing units: 8 Maximum printing width: 736 mm Maximum paper width: 740 mm Minimum paper width: 300 mm Maximum unwinding/rewinding roll diameter: 1,270 mm Maximum mechanical speed: 365 m/min (1,200 ft/min) Maximum printing speed: Depending on the installed equipment and operating conditions Paper weight: Approx. 40–250 g/m² Electrical supply: 400 V, 50 Hz, 3-phase Web tension control: Integrated Web guiding: Ultrasonic edge control Main machine control: Touchscreen-based control system Available Printing Cylinder Repeat Lengths: 520 mm, 524 mm, 540 mm, 544 mm, 550 mm, 558 mm, 570 mm, 580 mm, 602 mm, 607 mm, 636 mm, 639 mm, 645 mm and 680 mm. Godpfo Aht Dgjx Aanebw Printing Units: • 8 wet-offset printing units • Variable-format offset printing system • Plate cylinders with format-dependent configuration • Rubber blanket cylinders • Servo-driven individual printing units • Motorized adjustments • Automatic register control • Ink supply and ink level monitoring • Dampening systems with ceramic rollers • Integrated temperature control • Automatic washing systems Unwinding and Web Handling: • Unwinding unit for rolls up to 1,270 mm diameter • Pneumatic reel-loading system • Automatic web tension regulation • Ultrasonic web edge guiding • Web cleaning system • Web transport and guiding rollers Drying and Cooling: • UV curing system with UV lamps • UV drying stations integrated into the printing line • Cooling units for the printing units • Chill-roll cooling system • Temperature-controlled inking and dampening components Additional Equipment: • Flexographic printing/coating unit • Anilox roller system • Doctor blade chamber • Variable-format flexographic unit • Web inspection system • BST video web monitoring • Barcode analysis software • Print defect detection software • Automatic register control • Integrated operator control panel Machine Configuration: • 8-color web offset printing press with additional flexographic printing/coating capability, UV curing, web inspection, and automatic register control. • Suitable for printing on paper substrates within the specified material range.

Condition: ready for operation (used), Year of construction: 1970, Heidelberg GTS Hot Foil Very good condition Available immediately Godpfezcdfnsx Aanjbw

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 503,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320 Gjdpfx Aaexuid Ssnsbw

Condition: like new (used), Year of construction: 2019, operating hours: 10 h, functionality: fully functional, # Complete Screen Printing Equipment Set – 4 Printing Machines, 4 UV Dryers & Screen Preparation Equipment For sale: Complete professional screen printing equipment set manufactured by Grafica Flextronica (India). A complete screen printing setup suitable for industrial printing applications. The equipment is ideal for businesses looking to start or expand their screen printing operations. ### Equipment Included: - 4 Screen Printing Machines – Grafica Flextronica, Nano-Print series. Industrial screen printing machines with adjustable printing settings and foot pedal operation. - 4 UV Curing Tunnels – Nano-UV conveyor dryers designed for curing UV screen printing inks. - 1 Screen Preparation Cabinet – Includes a drying system and screen stretching/tensioning equipment for screen preparation. ### Technical Information: Manufacturer: Grafica Flextronica, India Models visible in the photos: - GF-2228 NSM – 220 V, 3.5 kW - GF-2228 NPP – 220 V, 1.2 kW - GF-18 UV – 440 V, 4.5 kW ### Features: - Professional industrial-grade equipment - Suitable for various screen printing applications - UV conveyor drying and curing systems - Screen preparation equipment included - Robust construction - Complete setup for screen printing production Condition: Used equipment. Please refer to the photos for details. Gjdps Ag S A Asfx Aanjbw Location: Lithuania The equipment can be inspected by prior arrangement. For more information, additional photos, technical details or pricing, please contact us. Serious inquiries are welcome.

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Gbodeynuudspfx Aanow

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  Gbedpfeyhgwdjx Aanjw - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2015, Overview Gbedpsyhgvgjfx Aanow The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") Gbodpfxox Ngfls Aansw • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, STC-Ref: G-022-7647 Heidelberg OHT A4, Hot Foil Stamping, Year: 1974 format: 260x380 mm, 1 colors equipped: - foil stamping and embossing - hot foil stamping device (embossing) - grey model Gjdpoz Ay Udsfx Aanebw - heating plate --> available: 11/2026

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. Gbedpfoiphikex Aanew A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior appointment.

Condition: used, Year of construction: 2010, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  - Capacity: 39,000 bottles per hour (bph) - Bottle Formats: 1.5 L - Worked Labels: IN REEL - two label applicators  - Reel Change: Automated - Run Time: Approx. 55,000 hours - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC - Protection Class: IP 54 (main panel and motors) - Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere Gsdpfx Aajydctyjnobw - working direction: left-right/clockwise  - bottle infeed/outfeed parallel on one side of the machine

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Gedpfsyyb Snsx Aansbw - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators

Condition: excellent (used), Year of construction: 2025, Hot fill bottling line - previously used on 500ml microwaveable bottles of soup. Consists of stainless steel bottle unscrambler with hopper and inclined conveyor, 90 degree infeed conveyor, 16 head in-line filler, 3 head inline capper, stainless steel cap unscrambler with hopper and elevated conveyor. Installed new late 2025 and only available label due to the Bankruptcy of contract packer. Godjztqfnjpfx Aanebw

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Gbodpfxjx I Nfrs Aanew Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll - year of manufacture: 2008 - labelling applicators: 2 (wet-glue heads) - operation Direction: Right-machine, parallel on one side of the machine - production Capacity: 45.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Gjdpfsyhgqqjx Aanebw

Condition: used, HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Gbjdpfsukxv Njx Aanew

Condition: like new (used), Like-new industrial label printer for print-and-apply applications in logistics, shipping, packaging, and production labeling. Manufacturer: Zebra Technologies Type: Industrial label printer Series: ZE500 Gsdpozdux Hsfx Aanebw Model: ZE500-4 Version: Legi-Air 4050 LH Condition: like new Quantity: 1 Serial number: 67J193100183 Printing process: Thermal direct and thermal transfer Print width: up to 104 mm Resolution: 300 dpi Media width: up to 114 mm Mains voltage: 100–240 V AC Frequency: 47–63 Hz Rated current: 4 A Operation: Front display with keypad Design: OEM print module for print-and-apply systems Ribbon operation: Yes Application area: Shipping labels, pallet labels, product labeling, logistics labeling Manufacturer designation, print module: ZE500-4 Legi-Air system: 4050 LH

Condition: used, Year of construction: 2009, HERMA provides specialized automated and semi-automated labeling systems designed for boxes, cartons, and packaging lines, built around the HERMA 500 High-Performance Labeler. [[1](/), [2](/)] Godpoz Rvb Iefx Aanebw Key Box and Carton Labeling Solutions - Print & Apply Systems: Integrates a label printer and applicator unit to print variable data (such as shipping labels, barcodes, or tracking info) in real-time right before dispensing onto boxes. - Tamper-Evident Seal Labelers (e.g., HERMA 362E TE): Designed for sealing rectangular, dimensionally stable folding boxes and cartons with L-shaped or C-shaped security labels, achieving speeds up to 200 products per minute. - Top and Bottom Labelers (e.g., HERMA 652C): Compact, space-saving systems equipped with dual HERMA 500 applicators to apply labels simultaneously or sequentially to the top and bottom of packages at speeds up to 250 products per minute. - Two-Side Labelers (Series 362 - E, C, M, and TE variants): Provides accurate side or corner labeling for primary and secondary carton packaging, featuring synchronous centering devices and quick, tool-free format adjustments. Core Features - Modular Architecture: Built with standardized components allowing easy integration of thermal inkjet or thermal transfer printers, vision inspection systems, and automated rejection units. - High Precision & Speed: Powered by the HERMA 500 applicator series for high-cycle rates and stable label positioning. - Connectivity & Control: Features touch-screen operation, PLC/Ethernet interfacing, and automatic line-speed synchronization Type: Labeller for Boxer, top Jars, Bottles, Small Boxes, etc

Condition: like new (used), Year of construction: 2019, HERMA 725 D self-adhesive label applicator, C/D-Wrap – wrap-around design This label applicator, with a capacity of approximately 60 units/minute, is designed for labeling products and folding cartons with C-Wrap and D-Wrap labels. The performance range of the machine includes: Label carrier tape width: max. 160 mm Label roll diameter: 400 mm Tape width: 235 mm Includes HERMA 400 label dispenser Like new The machine is equipped with an Allen hot foil coder. Manufacturer: Herma Year of manufacture: 2019 Space requirement: 190 x 90 x 180 cm Gsdpfx Ae Ah H Ansansbw

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Gbodpfx Aaewwg N Tensw Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: used, functionality: unexamined, Labeller / label printer from ongoing production CAB Hermes A4L/300 see manual in the attachment several units available Gbjdpfx Aowip Sueanow

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Gbodpfx Aeyxp Nxjanjw Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: used, Year of construction: 1993, Overview  This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data Gbodpfey Hmtwsx Aanew - Capacity: approx. 7,200 bph - Formats: 1.5 L / 2.0 L - Application: PET - Configuration: Hotmelt labelling machine for precut paper labels

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Gjdpfxjux Sfzs Aanobw Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Year of construction: 1996, condition: good (used), Label printing machine, model Labelmen PW180DLU, year of manufacture 1996, 4 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwind unit, slitter-rewinder, in good condition, available immediately. If you are interested, we will also be happy to provide you with information about other machines in our inventory. Godpfxoiphiys Aanjbw You are cordially invited to inspect the machine at our facility, by prior appointment.