Used Levelling for sale (5,696)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Nodpezhnlzofx Afwolf Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Nedpozhn Rqofx Afwslf Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes Nodpfxozuxfro Afwolf * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Njdpfx Afozu Akrswjlf Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: good (used), sheet thickness steel (max.): 3 mm, product width (max.): 200 mm, - Capacity: 200 × 3 mm - Manual operation Nlodpszb Afkefx Afwsf - Automatic operation - Clockwise and counterclockwise rotation - Infinitely adjustable speed - Emergency stop - 380V

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (Type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels, each accommodating 3 Euro-pallets side-by-side with a bay width of 2,700 mm). The system consists of 1 starter bay and 7 add-on bays, resulting in a total length of approx. 22 meters. Thanks to the grating decks, the racking is extremely versatile—suitable for general cargo, order-picking stock, or damaged pallets. Included push-through guards and rear mesh panels ensure maximum safety. They provide perfect protection against pallets or loads being pushed through accidentally or falling off. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Nledpfozrlp Sjx Afwjf Levels: 4 (including floor level) Beam type: INP 100 Bay load: 3,000 kg Section load: 14,000 kg Scope of delivery: 09 x Upright frames 6,200 x 1,200 mm (blue) 48 x Pallet rack beams 2,700 mm (red) 24 x Push-through guards 2,700 mm 32 x Rear mesh panels 2,700 x 1,200 mm 48 x Grating decks 1,330 x 1,200 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Issuance of a legally compliant inspection report and inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2012, total height: 115 mm, total width: 180 mm, total length: 275 mm, Machine levelling feet BWF RK4 36 tonn (12 units) Length:275mm Width:180mm Nlsdpfszqn Stex Afwsf Height:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, total height: 135 mm, total width: 230 mm, total length: 345 mm, overall weight: 30 kg, Machine levelling feet 70ton(7units) MACH-ID 9762 Nlodpfozqm Ndex Afwsf Make: BWF Type: RK5 Year: 2012 Length:345mm Width:230mm Height:135mm Weight:30kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, machine/vehicle number: 90041833, Year of construction: 2001, operating hours: 278 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,600 mm, empty load weight: 923 kg, drive type: Elektro, Low-lift order picker Chassis number: 90041833 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: SBS Battery type: PzS Njdpfx Afjzvz D Howslf Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: German: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: excellent (used), Year of construction: 2016, operating hours: 11,000 h, Ref: 11132 . 2016 Muller Martini Ventura MC 160 Latest Model, Fully Automatic Book Sewer capable of 160 cycles p/min Excellent condition - Only 11,000 hours worked! Equipped with: Touch Screen Commander control ASIR III automatic signature control Servo drives 11 stitches / opening 2+2 Venturi jets Leaf chain for thin signatures Device for thread melting Belt delivery Features: Patented loop formation using blow air and an active thread cutting system Active thread divider system as standard - this is not part of the basic equipment of any other entry-level model in the market. It guarantees that threads are trimmed between the individual book blocks without tension. 1. The punch needles make the holes in the signature from below. 2. Sewing needles pull the thread through every other hole 3. Air blast blows the thread as a loop into the slotted lever 4. The hook needle grabs the loop. Then the hook needle and sewing needle pull the thread up simultaneously, creating the thread chain. Wide Range of Sizes: Designed for the most common size and fold types, it can process signatures ranging from; 120 to 425 mm in length and from 75 to 320 mm in width, and from four pages to 4 mm in thickness. User friendly: Job changes can be performed quickly and conveniently thanks to the display on the touch-screen with the proven job and setup wizard from Muller Martini. Nljdpfx Aszpv Efsfwef Uniform icons make it easier for machine operators to get an overview of the whole machine. With its quick job changeover times, the Ventura MC 160 is suitable for both short runs and industrial three-shift operations. Specification: Max signature length: 425mm Min signature length: 120mm Max signature width: 320mm Min signature width: 75mm Max thickness: 4mm Max. speed: 9,600/hour

Condition: ready for operation (used), Year of construction: 2013, Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement. Nodsy Uyfvopfx Afwslf

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER Nljdexcn Huepfx Afwef MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION

Condition: ready for operation (used), Year of construction: 1977, Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible. Nodozf Ncvopfx Afwolf

Condition: used, Year of construction: 2004, operating hours: 5,945 h, Komatsu D65PX-15 crawler tractor, Year of manufacture: 2004, Operating hours: 5,945h, Undercarriage: 30%, Engine: Komatsu [155 kW/207 hp], ripper valve, immediately ready for operation! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will gladly assist you. Further information is available on our website. Errors and prior sale excepted! = More information = Nljdpfoy Ivrxox Afwef Drive: Crawler Please contact Tobias Ebert for further details.

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Nsdjv Tpv Nopfx Afwelf Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: used, Electric oven with 8-level proofer Dimensions without stand (WxDxH): 780 x 1030 x 2100 mm Dimensions with stand (WxDxH): 780 x 1030 x 2400 mm Oven -Model: RS10A20-1 -10 levels -Tray size: 400x600 mm -Power: 18.6 kW -Voltage: 3x400V + N + PE / 50Hz -Serial number: 10NL C0143 Proofer RE16A-S -8 levels -Serial number: ETNL C0093 -Power: 1.2 kW -Voltage: 1x240V+PE / 50Hz -Refurbished equipment: Equipment is prepared upon order, pick-up and return times are agreed at that moment (price after refurbishment - please request a quote) Nsdpfx Afsyhfubewelf

Condition: excellent (used), Straightening machine, Optimatic RMO 880. Nljdpfjzu Ix Iex Afwof

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 090-023, We offer this new OPPLINGER Optimatic RSMO 090 automatic leveling and tensioning bench, year of construction 2015. Type: RSMO 090 Serial number: 090-023 Technical details: Nodpezuc Nbofx Afwjlf - Level, Tension, Pull Back, Set Tires - Microprocessor control - Touch screen 12,1 ″ - width of band saw blades 65 – 300 mm - length of band saw blades 4300 – 19800 mm - Blade thickness 0,7 – 2,7 mm - Electric supply 3x 400VAC– 50Hz or special voltage - Pneumatic supply 0,7L / Hub 5 Bar - Weight 700 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Nlsdpfsztqxzex Afwjf Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 Nledpfx Afjzv S Nmowsf The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Year of construction: 2010, condition: used, Precise fill level control for detecting underfilling and overfilling of bottles. P max: 10 bar Current: 8 A Voltage: 230 V Frequency: 50 / 60 Hz Length: 1,2 m Width: 0,93 m Height: 2,2 m Weight: 350 kg Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table Nledpfsztzcdsx Afwef

Condition: used, Year of construction: 1966, 5 Nlsdpfx Afex U A Nkjwjf weight 5 t .

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables Nlsdpfjztzlxjx Afwef - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, machine/vehicle number: 0162, Year of construction: 2005, load capacity: 1,000 kg, lifting height: 4,875 mm, fuel type: electric, mast type: simplex, drive type: Elektro, High-lift order picker Chassis number: 0162 Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Rear tire type: Solid rubber Njdpoy Upi Rofx Afwjlf Battery voltage: 80V Battery type: PzS

Condition: used, Year of construction: 2014, Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Nsdjyb Sk Nepfx Afwelf Technical data - Inspection functions: - Overfill and underfill detection using HF (high-frequency) method - Closure control via integrated sensor for metal caps (mounted in filler) - Condition: Excellent, fully functional before dismantling - Status: Dismantled and stored, ready for shipment - Application: Bottling lines for beverages with metal closures - Included components: Trigger sensors, encoder, and pusher