Used Lgu Haecksler for sale (101)

Condition: used, Brewing plant with stainless steel 5-device brewhouse (manufacturer: Nordhausen) with an output of 10 hl, with 2-roll grist mill, wort cooling, wort aeration and hot water tank. Fermentation, storage and pressurised tank cellar with: - 7 pieces 25 hl ZKGs (Nordhausen, 2009) coolable, insulated with firmly welded stainless steel panelling - 6 upright storage tanks, 10 hl - 1 upright storage tank, 50 hl, manufacturer Metrec) - 1 upright storage tank, 40 hl, manufacturer Metrec - 1 horizontal pressurised tank (Kaspar Schulz, 1994), 37 hl, 3 bar - 1 yeast tank (Nordhausen, 2012), 3.5 hl, 2 bar, insulated, conical, with content measurement. Filtration with mobile kieselguhr filter and Pall particle filter. With mobile CIP system (Nordhausen, 2009) with 2 tanks of 1.6 hl each in square tube frame with pump and operating buttons and switches. Supply technology: - Steam generator (Jumag, 2009), heated with liquid gas - Compressed air system (Kaeser, 2008) - 2 x ice storage refrigeration system (Hafner-Muschler, 2009 and 2011) Additional title: 10 hl brewhouse with tank cellar and supply technology Cast wort capacity: 1000 l Godpfxoxbnw Dj Ag Njkc Features: 2-roll grist mill, 5-vessel brewhouse (Apparatebau Nordhausen) with mash tun, lauter tun, wort kettle, whirlpool, hot water tank, wort aeration, wort cooling system, 7 x 25 hl CCTs, 6 x 10 hl storage tanks, 1 x 40 hl storage tank, 1 x 50 hl storage tank, 1 x 37 hl horizontal pressure tank, 1 x 3.5 hl yeast tank, mobile kieselguhr filter, mobile CIP system, steam generator, compressed air system, 1 x ice storage refrigeration system

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Gkjdpfx Ash U Rznog Nsc Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Year of construction: 2016, condition: excellent (used), Kieselguhr filter DELLA TOFFOLA FSB 3 / BA1A -PED 7 - Beer version - Surface area: 3 m² - Filter elements for beer - Test pressure 7 bar - Product pump: Hilge, specially designed for beer - Fittings, specially for beer - Filter only slightly used Gedpfx Ajw D Ak Tog Nokc - Filter in very good condition

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Gjdewd Talepfx Ag Nokc

Condition: used, Year of construction: 1900, table length 1000 mm table width 800 mm Gkedpfx Aetwbrneg Njc table height 200 mm work height max. 1100 mm material Stahlguss total power requirement kW weight of the machine ca. 250 Kg dimensions of the machine ca. 1,0 x 0, 8 x 1,1 m Measuring plate on 3 adjustable feet

Condition: used, Year of construction: 2011, operating hours: 18,151 h, * · ??Liebe Interessenten, ??gerne können Sie uns über WhatsApp kontaktieren: ???.Für Anfragen außerhalb von Deutschland nutzen Sie bitte die internationale Rufnummer: · ? 6569??.Wir freuen uns auf Ihre Nachricht * Terex Fuchs MHL 331 * Bj. 2011 * Betriebsstunden 18151 * 4 x Stützen / Pratzen * Klima * Hochfahrbare Kabine * 4 x hydr Anschluss * 1 x Stromanschluss * Straßenbeleuchtung * Arbeitsbeleuchtung * Rückfahrcamera * Kabinenfilteranlage * Reifen Vollgummi 10.00-20 * deutsche Maschine Gsdpfx Aow D Tddog Nskc * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp 00496569

Condition: used, Year of construction: 2004, Kieselguhr settling tank with 4.45 m³ capacity Additional title: KG settling tank Content: 4450 l Max. working pressure: 80 °C Length: 1710 mm Width: 1710 mm Height: 3550 mm Weight: 450 kg Gsdpfx Agjw Uc Ths Nskc Material: stainless steel 1.4301 Position: vertical cylindro-conical tank Base construction: on pipe feet Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) Gkedpfxeh U Nvke Ag Nec MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Drive Shaft EN24T Steel Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Gedpfewdtbcsx Ag Njkc Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Price Euro 4.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2008, PADOVAN TAYLO LUX 10 ROTARY PRECOAT VACUUM DRUM FILTER ROTARY VACUUM FILTER FOR WINE LEES, GRAPE JUICE AND CARBOHYDRATES – TAYLO DRUM AREA - 10,5 Sq. m. Vacuum filtration on kieselguhr prepanel or perlite. Processing steps: - Pre-panel formation; - Filtration and drainage; - Cutting and draining the panel; Gkedpfx Agsv Ivm Ds Nsc - Extraction of the filtrate; - Filtration of residual liquid and filter washing at the end of filtration. EXCELLENT CONDITION. LOCATION - POLAND.

Condition: excellent (used), Year of construction: 2000, length 5.000 mm width 2.000 mm Thickness 210 mm material Stahlguss control total power requirement kW Weight 6 t dimensions of the machine ca. m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots, Gksdpfst Smhvjx Ag Njc

Condition: like new (used), Year of construction: 2011, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-i530 Gsdswk Rpdspfx Ag Nokc Technical features Dimensions Table dimensions: 2300 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 3000 r.p.m. (4000 r.p.m.)Spindle power: 22 kW Feedrates Rapid feedrate (X-Y-Z):   20000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approx.: 14000 kgMachine dimensions approx.: 6114 x 5070 x 2803 mm Accesories External coolantElectronic handwheel: HR-510New foot clamping tool pedalGuarding and new perimetral safety fence installation Sales conditions Warranty: 6 months mechanical partsSale conditions and price: On request View all technical features

Condition: used, Year of construction: 1989, System for the secondary filtration of beer after the Kieselguhr filtration. Operating pressure: 10 bar Operating temperature: 140 °C Volume: 169 l Gkedew Tmqbspfx Ag Njc Length: 4,10 m Width: 1,30 m Height: 2,0 m Weight: 1700 kg Material: stainless steel Position: standing Base construction: Frame Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Gsdpfx Ajh U Rzgog Nekc Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 1983, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1470, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 50 Gksdpfjtqf A Eex Ag Noc Year of construction: 1983 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 3100 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws Dimensions: Volume 3100 L Length 4900 mm Width 2400 mm Total height 4100 mm Last use: Food (brewery) Technical documentation: Yes

Condition: new, - New -with swiveling sanding unit andoscillating sanding belt F version forVeneer grindingDescription:- The grinding unit can be swiveled up to 45 ° using a lever- The machine stand made of welded steelguarantees high torsional rigidity andvibration-free work.- Oscillating sanding belt with separateGear motor for better grinding results- Oscillation can optionally be switched on- Sanding sole with graphite coating for a higherService life of the sanding belt- Height-adjustable sanding table for usethe entire width of the sanding belt- Height-adjustable additional table with suctionfor grinding radii- The spring-loaded belt tension is the sameTape length differences independently.- With double suction- Extendable roller table extension- With rubberized sanding roller- Veneer edge grinding device with contact shoewith fine adjustment, relief rollersand fence rulers- With grooved infeed ruler for veneer protrusions- Quick changeover of veneer edgespossible on solid wood sandingTechnical specifications:Dimensions and weightsLength approx. 1900 mmWidth / depth approx. 900 mmHeight approx. 1350 mmWeight approx. 290 kgConnection suctionExtraction nozzle diameter 140/100 mmDrive powerOscillation motor 0.25 kWWork table (s)Working table length 960 mmWorking table width 350 mmWork table height adjustment 230 mmHeight adjustment longitudinal table 230 mmCross table height min. 720 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 3000 mmSanding belt width 200 mmBelt speed (s) 20 m / sSanding surface length 1050 mmSanding surface width 200 mmOscillation stroke 20 mmItem No. 5363001 Gksdpfx Ajvwgbweg Nec

Condition: used, Year of construction: 1900, length 1500 mm Gkjdetwbr Iopfx Ag Noc width 1000 mm table height 250 mm work height max. 1100 mm Material Stahlguss 0 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,5 x 12,0 x 1,1 m Measuring plate on 3 adjustable feet

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet Gsdpfx Agjrai N Ae Njkc

Year of construction: 1979, condition: used, Centrifugal high-performance kieselguhr filter with buffer tank, kieselguhr dosing vessel and peristaltic pump. Additional title: Kieselguhr filter Capacity approx.: 110 hl/h Vessel volume: 1550 l Operating pressure: 9 bar Operating temperature: 100 °C Operation / Control: Control cabinet with operating buttons Material: Stainless steel Features: Kieselguhr dosing vessel, 14,26hl; hose pump Periphery: buffer tank, vessel Gedpfx Asvcqmbjg Nokc

Condition: used, overall weight: 35,000 kg, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, axle configuration: 3 axles, first registration: 02/2020, tire size: 445/45 r19,5, machine/vehicle number: 41b5b53ab0b527fda1f0f26fe, Further information The pictures are archive pictures, the vehicle may still be in use! Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins PRO SLIDE, additional front skid plate for protection when saddling up Gkedpeqhiyxofx Ag Nsc Slightly angled outer frame with Load-Lock profile for attaching tensioning straps Note! To attach the straps in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Note: Free support leg corner dimension or free swing radius to the rear approx. 1930 mm 1 pair of gear support legs at the rear, with straight lower section and single-sided operation in FR right Pull-out ladder at the rear Side door retainer Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray flaps behind each axle Heavy blocker rear transverse bumper + side roller bumpers Heavy-duty pallet stop bolted on both sides, approx. 15 - 20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15 - 20 mm Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Storage compartment for 16 insertable slats, one-sided in FR-left, below loading area Axles+suspension BPW disk brake axles with 370 mm disk diameter, Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Rear loading height approx. 1200 mm when raised (air suspension on truck lowered to approx. 910 mm semi-mounted height) without lift axle Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-applied parking brake Duomatic connection at the front, without connecting cable EBS make Wabco-E, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Wabco ramp starting aid, TailGUARD with 3 ultrasonic sensors at the rear of the vehicle Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable Reversing camera system with color flat screen monitor, with wireless connection to the screen, screen with suction cup mount and power supply via 24 volt vehicle socket Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Rear area with heavy-duty floor approx. 1800 mm long In the rear area, steel/ checker plate flooring is fitted over a length of approx. 300 mm (protrudes slightly). Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, Crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. 3 pairs of stanchion positions Insertion slats Wooden slats Additional row of aluminum V-slats Vario steel slats, in conj

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1124, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 70 Year of manufacture: 1977 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 4300 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws 78 strainers Dimensions: Volume 4300 L Length 4200 mm width 2200 mm Gjdpfetqf A Rsx Ag Nskc Total height 4800 mm Last use: Food (brewery) Technical documentation: Yes

Condition: used, with attached sliding tableconstructed with a cross-cut sawused, good condition, poorly usedmanufactured by Martintype T 21brake mechanical foot pedalright hand-left hand rotationtable size l x w 800 x 1000 mmmilling arbor diameter 30 mmcutter fence Holzbackensliding table / sliding tableworkpiece clamp 1 x mechanicalguide fence 1 x 1500 mm, 1 x 1000 mmexhaust connection D 150 mmrequired space ca. l x w x h mm1700 x 1200 x 1300located in 97447 Gerolzhofensale in current condition as seenwithout technical examination- free on truck - Gkedsvwgatopfx Ag Noc

Condition: like new (used), Filter elements (spare parts) for kieselguhr filter SEITZ - ORION L Gkedpfeq H Smaox Ag Nsc 1. SS stainless steel plates and frames 40/40. Mounted together on wheels. 2. SS stainless steel plates 60/60. 9 pieces 3. Gaskets 14 pieces 4. Gaskets 16 pieces 5. Gaskets 26 pieces

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Gjdevcqn Sopfx Ag Nokc Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Year of construction: 1975, condition: used, Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force. Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel1.4541 (vessel) Base construction: on feet Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology Gsdpfjvcqpcsx Ag Nekc