Used Liebherr A 314 for sale (239)

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules Dcjdpox Huxuefx Abuoc - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Airco back drive camera Dcedpfx Absxnmz Ieuoc tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: excellent (used), power: 400 kW (543.85 HP), operation weight: 90,100 kg, chain condition: 80 %, Year of construction: 2018, operating hours: 9,708 h, LIEBHERR R 976 HD Year: 2018 Hours: 9.708 hrs. Monoboom 7,20 Meter Stick 2,90 Meter Dcodpfx Abjxhclijuoc V-edge Rockbucket with teeth (RESCH-KA-TEC), cutting width 2,15 Meter, capacity 5.2 cbm, condition 70% good Undercarriage with with double-web shoes 600 Millimeter Condition of the u/c: 80% good Liebherr 8 Zylinder V-Dieselengine, kW/HP 400/544 Central lubrication for the machine and for the slewing ring Rear and side camera Protection grill over the cabine Original Painting Full service machine from Liebherr Recent repairs: New hydraulic oil cooler New high-pressure pump New control unit Operation weight 90.100 KG CE/EPA Technical and optical in a very good condition

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, semi and fully automatic. Dcedpfxorpmlrj Abusc Fully functional, with control system.

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Dedpfjxtu Dhex Abuocc

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Dedpfx Ajw Rcrvebujcc Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: used, functionality: fully functional, mileage: 178,419 km, fuel type: diesel, overall weight: 50,000 kg, first registration: 03/2011, Year of construction: 2011, operating hours: 5,953 h, machine/vehicle number: IF75RFR, Equipment: ABS, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, onboard computer, parking heater, traction control, trailer coupling, Liebherr Crane - Model LTM 1050-3.1 Application: construction Drive: wheels Own weight: 39,500 kg Lifting capacity: 50,000 kg Dcedpfjxnkc Nox Abuoc

Condition: used, functionality: unexamined, machine/vehicle number: LGPv 1420, Used Liebherr Laboratory Freezer Manufacturer: Liebherr (Mediline) Model: LGPv 1420 Index 41C/001 Manufactured: 2016 Details: Capacity: 1427 litres External dimensions (W x D x H): 1430 x 830 x 2150 mm Internal dimensions (W x D x H): 1250 x 700 x 1550 mm Dedpfx Asxiw Uuebuecc Complete with 8 shelves, max. load 60 kg Temperature range: -10 to -26°C Energy consumption: 8.887 kWh/24h Dynamic freezing system with fan Automatic defrost With lock and on castors Door, steel-white Weight approx. 219 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 10,600 h, * 10,600 operating hours * Operating weight: 8,350 kg * Hydraulic quick coupler * Bucket and pallet forks * Maximum speed: 30 km/h * Immediately ready for operation Dsdpfjxzcttsx Abuocc

Condition: good (used), Liebherr GKv 6460-20K with Umluftkühlung Der Liebherr Gastronormkühlschrank Gkv 6460-20 with Umluftkühlung is suitable for the Gastronorm GN 2/1 produced. Repairer: Liebherr ProfiLine Gastronormkühlschrank Gkv 6460-20K / 001 Automatic Abtauung Tür- und Temperaturalarm Digital Display Feuchtigkeit in 2 Stufen Dichtung wechselbar Schloss ohne Schlüssel Türanschlag wechselbar SwingLine Tür mit Stangengriff Stand füße high adjustment bar Weiße Roste, up to 60 kg Cleaning sablauf Fugenlos Innen weiß Kunststoff Gastronome GN 2/1 Umluftkühlung Temperature range +1°C to +15°C °C Gross volumes: 663 liters Kühlmittel: R 600 a Connection: 220-240 V ~50 Hz Inner size (HxWxD) 1710 x 650 x 581 mm Dimensions (HxWxD) 2064 x 750 x 750 mm Height Stellfüsse: 150-180 mm Weight: 96.0 kg More articles - new and used - can be found in our online shop! Dsdpfx Absxg Ihmsujcc International shipping costs on request!

Condition: excellent (used), Liebherr Gastronorm Refrigerator with Convection Cooling The Liebherr Gastronorm Refrigerator GKV 6460-20 is designed to fit the Gastronorm GN 2/1. Manufacturer: Liebherr ProfiLine Gastronorm Refrigerator Gkv 6460-20 Automatic defrosting Door and temperature alarm Digital display 2-level humidity control Replaceable seal Lock Reversible door hinge SwingLine door with bar handle Height-adjustable feet Galvanized shelves, up to 60 kg Cleaning system Seatless White plastic interior Gastronom GN 2/1 Convection cooling Temperature range +1°C to +15°C Gross volume: 663 liters Coolant: R 600 a Connection: 220-240 V ~50 Hz Interior dimensions (HxWxD) 1710 x 650 x 581 mm Exterior dimensions (HxWxD) 2064 x 750 x 750 mm Height of adjustable feet: 150-180 mm Weight: 96.0 kg Find more items – new and used – in our shop! Dedsxg H Aiopfx Abuocc International shipping costs on request!

Year of construction: 2017, operating hours: 6,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Dcjdpsh Tyz Usfx Abujc LIEBHERR HS 8100 Year of man.: 2017 Current hours: 6430 Boom: 2x6m 1x3m More details on require!

Year of construction: 2014, operating hours: 7,950 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine LIEBHERR 505 kW Dodpfeh Ty Agsx Abujcc Rotary Head BAT 510 Prepared for oscillator Good working condition immediately available

Year of construction: 2006, operating hours: 13,700 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information LIEBHERR LRB 155 + Juntan Hammer HHK 5/7 More details on serious require, current location Germany Yard M2 GmbH Wilhelmshaven Juntan Hammer HHK 5/7 Year. 2002 Dcodpfx Aeh Ty Akobuoc

Year of construction: 2017, operating hours: 10,750 h, condition: used, Field of application: Construction Dcodpfxoh Ty Anj Abujc Please contact Mohamad Fattah Ahmad for more information -Rotary BAT 410 -Engine 390 kW Main winch 30 to -central lubrication -air compressor Machine is in very good working condition!

Year of construction: 2009, operating hours: 11,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Dodpfx Abeh Ty Aroujcc Preperation for grab use and oscillator MAN Engine LD 2842 LE 103 with 670 kW 2x 30To Winches with 36mm ropes 25 to hook Basismast, Mast: 2x 6m + Masthead

Year of construction: 2015, operating hours: 8,100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine 670 kW Tier 3 2x Winches 300 kN Counter weight 32,5 to Additional informations: -Additional reversing camera, winch monitoring -Hammerhead - Liebherr Hydraulic Oil Plus (Longlife & Bio) -LiDAT plus incl. Teleservice - Central lubrication system slewing ring - Electric refueling pump -Air conditioner - Auxiliary heating - Orthopedic driver's seat Dodpfx Aboh Ty Ayeuocc - Gripper calming winch 3to - preparation until bulkhead plate - Main winch constant pull one winch - Wind synchronization - Litronic SWG control - Auxiliary hydraulics for diaphragm wall grab Leffer - Rope winch - VRM ready - Crawler carrier hydraulic quick couplers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Dcodpfx Aowgm Izebusc Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: used, Year of construction: 2012, operating hours: 5,626 h, Equipment: all wheel drive, New arrival!! Liebherr L 514 P (Parallel Lift Frame) Stereo Loader (articulated steering + rear axle steering – extremely maneuverable!!!) Last model year without particle filter and AdBlue!!! Chassis number VATZ1115AZB 031099 Operating hours according to meter: 5626 72 kW 98 HP, Total weight: 10,500 kg Unladen weight: 9,000 kg Dcodpfx Ajxlw Imobuoc * Hydraulic control circuit for high-tip bucket, grapple bucket, clamshell bucket, snow plow * Automatic central lubrication system * 2 work lights on cab roof (front) * 2 work lights on cab roof (rear) * Comfort seat with suspension * Adjustable steering column * Radio pre-installation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (blinker) at rear center cab * Reversing camera with separate monitor * Main electrical master switch Hydrostatic drive with 2 speeds Tires: Front axle: 17.5 R 25, 20% good Rear axle: 17.5 R 25, 40% good Width: 2,400 mm Various buckets for this machine in stock Additional equipment available at extra cost: Clamshell bucket 2.0 m³ from €3,250 High-tip bucket, 2.0–2.5 m³ from €3,950 High-volume bucket 3.0 m³ No. 59 – €2,950 Screening/mixing bucket 5-ton pallet fork from €2,190 Price with quick coupler and 1.6 m³ bucket: €43,900 net + VAT. Other equipment available on request! All prices are ex-stock, net price + 19% VAT for domestic sales or for export! We are happy to arrange transportation to your location. Sale only to commercial customers or for export. Sale as is, as seen. No warranty or guarantee. The listed mileage and operating hours are read off the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided shall not be regarded as guaranteed characteristics. The description and details serve solely as general identification of the vehicle and do not constitute a warranty in the legal sense. No claim to completeness is made. All details/descriptions and photos are non-binding and do not constitute guaranteed properties. Contract terms in order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical or transmission errors. The seller has not inspected the machine. Features may require individual verification. We are also happy to consider your vehicle in part exchange. For further questions, please contact us. For our international customers, we prepare all customs and export documents for fast and trouble-free overseas transport.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Dcedpfx Asw T R Auobuoc Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Dcjdsw T R Ahopfx Abusc Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN Dcodpfxow T Ry Ts Abuec MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: used, Year of construction: 2016, operating hours: 17,628 h, scale; quick-change system Dedpfxev Ilwro Abuscc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Dodpjwmbnpjfx Abuocc Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1191, rotational speed (min.): 4,000 rpm, rotational speed (max.): 10,000 rpm, tool length: 210 mm, TECHNICAL DETAILS Largest workpiece diameter: 180 mm Module range: 1 - 5 Minimum number of millable teeth: 7 Milling head swivel angle: ±35° Resolution accuracy: 0.1 degrees Workpiece table load: 17 kN Tool data Infinitely variable tool speed range: 4,000 - 10,000 rpm Number of tool threads: 1 - 7 Tool diameter for generating grinding: max. 145 mm Tool diameter for form grinding: max. 175 mm Tool length: max. 210 mm Total tool travel in the V-axis: max. 200 mm Shift travel from machine center - plus (+) direction: max. 100 mm Shift travel from machine center - minus (-) direction: max. 100 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Maximum rated current: 65 A Fuses in the supply line: 80 A Ambient temperature: +15 °C - +38 °C Relative humidity: max. 90% at 20 °C Relative humidity: max. 50% at 38 °C Operating noise: 80 dB(A) EQUIPMENT - With counterholder - No dresser Dodpowmb Amefx Abuecc - CBN wheels only