Used Lns for sale (27)

Year of construction: 2001, condition: used, Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power. Ledpfxoz Egffo Aazort

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Lodpfszl E Easx Aazjrt Retraction device: 600 mm Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Maximum feed rate: > 100 m/min Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Condition: used, Year of construction: 2009, machine/vehicle number: IntNr2314500, A proven, high-performance bar loader magazine, LNS, type Hydrobar 6.42 HS-4.6, is for sale. Technical data Manufacturer: LNS (Switzerland) Model: Hydrobar 6.42 HS-4.6 Year of manufacture: 2011 Working range (diameter): Ø 6 mm to Ø 42 mm Lrodpfx Ajzzp Dfsazst Max. bar length: 3,000 mm Guiding principle: Hydrobaric (complete oil bath) Feed drive: Hydraulic Oil capacity: approx. 150 - 170 liters (HLP 46 or equivalent) Total length of the magazine: approx. 4,850 mm Weight (empty): approx. 650 kg The machine can be inspected in operation by prior appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, TECHNICAL DETAILS - Counterboring diameter at 30° : 8 - 80 [mm] - Turning diameter : 10 - 60 [mm] - Max. turning length : 40 [mm] - Motorization * Motor power : 0.9 / 1.65 [kW] - Driving : 2 x 2 speeds * Speed 1 : 230 / 460 [rpm] * Speed 2 : 700 / 1400 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 740 x 400 [mm] Lredpez Eldyefx Aazot - Machine height : 1320 [mm] - Machine weight : 400 [kg] EQUIPMENT - Chuck 3 jaws

Condition: new, Year of construction: 2024, functionality: fully functional, control type: CNC control, bar length: 3,000 mm, bar diameter (min.): 3 mm, bar diameter (max.): 26 mm, We offer two new LNS bar loader magazines, model LNS GT 326. Lredpfxszl S Nrj Aazjt The mounting side is on the right.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231647, CNC Bar Loader LNS Express 220 Year of manufacture: 2007 Type: Bar Loading Magazine Quick guide channel changeover in less than approx. 2 minutes. Complete exchange of guide elements possible in under approx. 8 minutes. Technical data: Bar diameter range: 2 mm to 20 mm Channel diameter: 22 mm Max. bar length: 3,000 mm Installation dimensions (L x W x H): 3,970 x 480 x 1,250 mm Weight: approx. 850 kg Condition: fully operational Lsdpfxezx Rwho Aazert The machine can be inspected under power by prior appointment. Technical data and details are subject to change and error. Subject to prior sale!

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Lrjdpfx Aaozx Rv Dozot Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved! Lodpfx Aozx Rrreazort

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS Lrjdpfx Aajz Dk N Sozet - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] Lrsdpfx Aoz Dk N Eoazot - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS Lrodpoz Dk Nxsfx Aazot - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Condition: used, TECHNICAL DETAILS Ledpsz Dk Nrsfx Aazert - Bar diameter : 2 - 20 [mm] - Bar length : 3000 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3990 x 400 [mm] - Machine height : 850 - 1200 [mm]

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) Ljdpfx Aaswnprxjzsrt number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: good (used), Bar length up to 1600 mm. Some parts missed. For spare parts. Lrodpohvz Hzefx Aazst

Condition: used, Year of construction: 2018, LNS HYDROBAR HS 6.65 HS4.4 Year of manufacture: 2018 Ljdpszqc Enofx Aazort Condition: excellent DIAMETER RANGE: 2 – 68 MM

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Ledezpyq Eopfx Aazjrt

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Lrodpjv Im Uljfx Aazst

Condition: used, TECHNICAL DETAILS Ljdpfxovxlmus Aazjrt - Bar diameter : 1 - 12 [mm] - Bar length : 2000 [mm]

Condition: used, TECHNICAL DETAILS Lrjdpfx Aaou Agw Tjzjt - Bar diameter : min/max : 3/10 [mm] - Bar length : 3800 [mm]

Condition: used, TECHNICAL DETAILS - Bar diameter : 5-10-15 [mm] Lrsdpfxouhbhbe Aazot - Max. bar length : 4500 [mm] - Number of bars : 1

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] - max. bar length : 4 [m] - diameter : 17 - 13 - 6 Lrjdpjuhbhzjfx Aazet

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Ledpfx Aozl D Hpeazjrt

Condition: used, Year of construction: 2015, Brand and Model : LNS ALPHA SL65 S Manufactured year: 2015 Diameter: 6- 67 mm Bar lenght: 300- 1550 mm Loading System: Side load Rack Loading Capacity: 1660 mm Loading: Rear Lrodpfxozl Uu De Aazjt X axis retraction: 300 mm Type of Headstock: Fijo/ Fixed Partial changeover: 5 min.Manual Complete changeover: 8 or less min. Motor: Servo Drive: Notched Belt

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. It was functioning perfectly until it was replaced with a newer model. It is not possible to see it in operation because it is not connected to the CNC machine. Lrodpfx Aaezrw Duezot For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain.

Year of construction: 1998, condition: ready for operation (used), for material Ø: 6 - 80 mm for bar lengths: 100 - 915 mm Shooting table size: 945 x 800 mm Working height: 1400 mm Lrjdsdtywwspfx Aazjt height adjustable: +/- 200 mm elec. Connection: 220V Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg