Used Bar Loader for sale (25,088)

Condition: used, Year of construction: 2018, bar length 100 - 1.600 mm bar material dia. 6 - 120 mm Loading 1.000 mm weight of the machine ca. 750 kg dimensions of the machine ca. 2,5 x 2,0 x 1,6 m Wud3Gtgtg Bar Feeder LNS - Quick Load Servo III -incl. 9x reducing tubes

Condition: new, Extensive delivery program of bar loaders also hydraulic. Dq0Kwh

Year of construction: 1990, Condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Gvdgpg Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm B8Wdaq8J

Condition: used, _____ Description: Year of manuf. : 2005 In General: Technology:Multi-channel loading magazine Number of guide channels:8 pieces Sizes:14/20/26/32/37/42/47/52 mm Number of workpiece slides:8 pieces Diameter of the bars:10-50 m Bar length:3,000 mm Spindle height:1,055 - 1,200 mm Interface:Gildemeister : Attention:Loading magazine 2024 overhauled. Dq0O7H Interface adaptation:Possible to machine interface.

Condition: good (used), Bar diameter 65 mm H8Xf3Eek0 Max. bar length 3200 mm

Condition: good (used), Year of construction: 2008, overall weight: 500 kg, total height: 1,200 mm, space requirement length: 4,200 mm, space requirement width: 500 mm, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS Cozz0Bnfhw .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4200 mm .. space requirements -front/back-: 500 mm .. total height: 1200 mm .. total weight approx.: 500 kg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 45 mm, travel distance X-axis: 170 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, Inclined bed lathe Manufacturer: Biglia Type: B545 YS Control: Fanuc 32i-B + MG Year of manufacture 2011 S/N: XXXXX Origin: Italy Dqupwf Technical parameters: ----- • Bar capacity max.: Ø45 mm • Main spindle 6,000 rpm ..15 kW drive with C-axis • Counter spindle 5,000 rpm ..11 kW drive with C-axis • Y-axis +55/-50 mm • Revolver 12 stations BMT ..with tool drive 47 Nm • Travel paths X/Z: 170/560 mm • Turning length max.: 560 mm • Chuck processing Ømax.: 220 mm • Circulation Ø max.: 580 mm • Part discharge conveyor • Tool measurement • Coolant system • Chip conveyor • Short bar loader Samsys Multi-3000 • Footprint without loader: 4,300 x 2,000 mm • Weight: 5,000 kg Accessories: ----- • 2x collet chucks Hainbuch • 1x 3-jaw chuck SMW Autoblok • Bundle of jaws • Bundle of clamping top inserts • Bundle of fixed & driven holders • Documentation

Year of construction: 1998, Condition: ready for operation (used), for material Ø: 6 - 80 mm Gvjqks for bar lengths: 100 - 915 mm Shooting table size: 945 x 800 mm Working height: 1400 mm height adjustable: +/- 200 mm elec. Connection: 220V Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg

Year of construction: 2006, Condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Cvrcz0Mz9I Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 1997, bar material dia. 8 - 52 mm Er7Joyrcy bar length 3200 mm number of bars 6 / ø 52 mm oil volume 150 l weight 700 kg total power requirement 0,75 kW

Year of construction: 2008, Condition: excellent (used), Max. bar diameter 65 mm Gtmugtzqk Max. bar length 3000 mm

Condition: good (used), Year of construction: 2003, overall weight: 500 kg, total height: 1,200 mm, space requirement length: 4,200 mm, space requirement width: 1,000 mm, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4200 mm .. space requirements -front/back-: 1000 mm .. total height: 1200 mm .. total weight approx.: 500 kg F3Jch79 Bar range 3-32mm

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr230824, Magazine for bar diameters from 0.8 - 23 mm FMB Micromag 20 3200 "A" complete unit incl.: Telescopic tube, conversion kit, synchronizing device, manuals Connected loads: 3 x 190 - 480V Dimensions: (LxWxH): 5015x687x1200mm Weight: 600Kg The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved Magazine for rod diameters from 0.8 - 23 mm FMB Micromag 20 3200 "A" Complete unit incl: Telescopic tube, conversion kit, synchronizing device, manuals Connected loads: 3 x 190 - 480V Dimensions: (LxWxH): 5015x687x1200mm Weight: 600kg 2Ijmriyw The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Bar length 3000 mm Max bar diameter 65 mm Bu8Qvejy2Y Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Weight 1000 kg

Year of construction: 2001, Condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown Dqpihd are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 2001, bar material dia. 8 - 52 mm bar length 3200 mm Dqstkj number of bars 6 / ø 52 mm oil volume 150 l weight 700 kg total power requirement 0,75 kW

Condition: excellent (used), Year of construction: 2018, Used CNC lathe with Y-axis Haas ST-30Y Year of construction 2018 X/ Y 457 x 584 mm 76 mm bar capacity Standard program memory 1 GB Spindle, 4,500 rpm 22.4 kW A2-6 spindle nose 208 liter coolant tank with 0.6 kW pump Hydraulically operated 254 mm chuck Early detection module for power failure Ethernet interface Driven 4,500 rpm tools and C-axis, includes 24 (semi-indexed) stations BMT65 turret Synchronized tapping Automatic tool presetting arm with manual and automatic adjustment Hinged belt chip conveyor Programmable hydraulic tailstock MT4 Morse taper G0Ctdcr Finished part catcher Haas bar loader 1.5m Transport dimensions: 435 cm x 229 cm x 249 cm 6487.0 kg Machine can be inspected by arrangement in Upper Austria. The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding

Condition: like new (used), Bar length up to 1600 mm B8Pvvgk97V

Year of construction: 2002, Condition: used, The used FEDEK SN542 automatic bar loader is a valid alternative to the more classic bar feeder for carrying out (unmanned) bar machining on production CNC lathes. Maximum bar length 3,000mm, maximum bar passage 42mm Bd7Cv0Ljtwg year of construction 2002, according to CE standards.

Condition: good (used), For 5 meters bars Bu8Qpyuttg

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, bar length: 2,100 mm, bar diameter: 80 mm, Diameter mm 8-80 Bar length mm 700-2100 Loading system side elevator with chain Bar capacity 7 OVERALL DIMENSIONS Length mm 3350 Width mm 877.5 Dqt8Ot

Condition: good (used), * Muratec MT 25 MC. * Machine with 7 controlled axes. * Two twin heads. * Two turrets. * Turrets with 15 positions each, all of them motorized. * Motorized tools, C axis. * Integrated head motor 15 KW. * Motor starting torque 420 N/M. * Motorized tool motor 4 KW. O3Jvnw28I * Head size A2-6. * Maximum machining diameter 370 mm. * Maximum machining length 920 mm. * Bar passage 67 mm. * Prismatic guides on all axes. * Two 250 mm hydraulic plates on each head. * Automatic arm for collecting finished parts. * Automatic cleaning of secondary head with air or coolant. * Conveyor belt for finished parts. * Interface for bar loader. * 1.5 metre Multifeed bar loader. * Automatic stress control and tool consumption monitor. * Transfer system for parts between heads with automatic torque control. * Fanuc CNC. * Fanuc motors and servos. * Rapid traverse speed 20 and 25 m/min. * Main head speed 3,500 rpm. * Motorized tool speed 3,000 rpm. * Turret change indexing time 0.2 seconds. * Rear hinge-type chip extractor. * Complete equipment including static external and internal tool holders. * Complete equipment including axial and radial motorized tool holders. * Machine currently in operation. * Weight 10,800 Kg. * Immediate delivery time unless pre-sold.

Condition: good (used), Bar loader LNS ECO LOAD Cxq8M0Awfw

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hj9Pji2Um Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm