Used Lumber Planer for sale (1,713)

Condition: used, Weinig H25 high-speed planer and moulder for four-sided planing and profiling of wet wood (Freshly sawn) The pictures show the current condition of the machine. Among other things, some original Weinig new parts were installed, and the tables/stops were sanded and recoated. Further new parts are required for completion. These will be ordered on a case-by-case basis, taking customer requirements into account. The control panel is for testing purposes and is temporary. working width: 250 mm working height: 160 mm spindles: 5 Spindles: 5 spindle 1: Bottom (7.5 kW) spindle 2: Right (11 kW) spindle 3: Left (11 kW) spindle 4: Top (15 kW) spindle 5: Below (tba) feed: 15 kW, hydraulic Phjdpfow R S T Ajx Ah Uja control: ATS system Driven table rollers: Yes Table tops: Sanded and recoated (hardened) Powered table rollers: Yes

Condition: excellent (used), Wadkin grinding machine for sharpening profile and straight knives in the planer head Type - NV300 Shaft for planer head - 40 mm Maximum planer head diameter - 300 mm Minimum planer head diameter - 75 mm Grinding disc diameter - 31.75 mm Maximum cutter profile depth - 40 mm Pjdpehcw Tljfx Ah Usha Grinding motor - 1.5 kW Coolant pump power - 0.06 kW Coolant tank capacity - 22.7 L. Machine weight - approx. 400 kg Presale preparation, painting Very good working condition

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Pjdpfjx Ifdkjx Ah Ujha Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1989, working width: 510 mm cutter head: Tersa number of blades: 4 surface table length: 2800 mm adjustment table: hydraulisch / Fußpedal Hollow and pointed joints adjustment: ja read out table hight: Scala read out Hollow and pointed joints: Scala surface fance adjustable: ja motor power: 5,5 kW machine length: 2800 mm machine width: 1000mm Pedjx I Ah Hjpfx Ah Usha weight: 1050 kg

Condition: used, GRIGGIO Jointer TYPE PF 530: - Usable working width: 530 mm - Table length: 2900 mm - Infeed table length: 1660 mm - Depth of cut: 8 mm - Cutter block rotation speed: 5000 rpm - Motor power, manual star-delta start: 5.5 HP (4 kW) - Net weight: 910 KG - Noise level CE 859 standard: 76.5 dB (A) MACHINE EQUIPPED WITH: - 4 TERSA knives - Control panel on a support arm - Electronic digital dimension display - Two-piece jointer shaft guard - Motorized infeed table adjustment CE compliant Podpfx Asx I Ryqeh Uoha

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Pjdpfx Ajwtp U Rjh Uoha Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: used, knife: Reversible blade Z4 flight circle (ø): 125 mm drilling: 40 mm length: 110 mm Phodpowma D Nsfx Ah Usa material: steel

Condition: used, Year of construction: 2010, x-travel 6500/13500 mm y-travel 4000 mm z-travel 1500 mm w-travel 2250 mm Control SIEMENS 840 D table surface area 5500/12500 x 3000 mm distance between columns 3800 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 50000/75000 kg ram head dimension 520 x 625 mm spindle speed 5000 U/min milling spindle motor 63 kW max. torque on the spindle 2900 Nm Phedpewa Dxqjfx Ah Uea Tool bore DIN 69893 HSK-A 100 feeds x/y/z 24 m/min feed w-axis 6 m/min rapid traverse x/y/z 40 m/min total power requirement 120 kW weight of the machine ca. 250 t dimensions of the machine ca. 29,5 x 9,5 x 8,2 m Equipment / Accessories: - automatic tool magazine for 212 tools - automatic milling head magazine for 6 milling heads - Machining modules/ Milling heads: 1. Machining module -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2. Machining module -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3. Machining module -angle BM extended- 40 kW, 4000 rpm, 1800 Nm, HSK-A 100 4. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6. Machining module -Universal Index BM - 40 kW, 4000 rpm, 2100 Nm - C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 - Measuring probe - Coolant device - Chip conveyor - Technical documentation

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) Phodpfx Ahjh U Nvko Uoa MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1987, For sale is this fine jointer from GEA. The machine operates perfectly and can be inspected and tested on site. Machine details: 510 mm planing width, 4-knife cutterhead, Aigner fence, approx. 280 cm table length, 4 kW motor. Phedpfx Aex Ecxqoh Uea

Condition: used, functionality: fully functional, planing width: 520 mm, total length: 3,100 mm, total height: 1,500 mm, total width: 800 mm, overall weight: 900 kg, table length: 3,050 mm, planer shaft diameter: 120 mm, working width: 520 mm, number of planer blades: 4, – CE marking – machine as new TECHNICAL SPECIFICATIONS – max. planing width: 520 mm – cutterhead diameter: 120 mm – 4-knife cutterhead – TERSA knives – noise reduction comb at cutterhead – jointer shaft guard – table width: 51 cm – table length: 305 cm – hydraulic lifting by pedal – height counter – motor: 7.5 kW – tilting fence – manual star-delta switch – extraction port connection: 120 mm – two adjustable tables – quiet operation – full factory cast iron body – original factory paint Phsdpow Iqa Nofx Ah Uoa – dimensions (L/W/H): 310 x 70 x 150 cm – weight: 900 kg

Condition: excellent (used), Catalogue number 7667 TECHNICAL DATA - Working width: 630mm - Number of knives: 4 pcs - Max thickness of processed element: 250mm - From above: - Kickbacks - Serrated, driven infeed roller - Pressure bars - Planing cutterhead - Kickbacks - Smooth, driven outfeed roller - From below: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5kW - Electric table lifting - Lifting motor: 1.5kW - 3 feed speeds: 8/12.5/20m/min - Feed motor: 1.5kW - Extraction port diameter: 120mm - Dimensions (L/W/H): 1150x1200x1700mm Phsdpfxewt Agms Ah Uja - Weight: 1100kg ADVANTAGES – Polish production – Electric table lifting – Thickness planer, used, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR (according to 4.2 EUR exchange rate) (Prices may vary in case of significant rate fluctuation)

Condition: used, Kölle type HA 51 surface planer or simply surface planer for smoothing and leveling (surface planing) wood. Incl. jointing unit Hemag. Phsdpovnu H Aofx Ah Uoa Technical specifications: on demand working width: 450 mm working height: 100 mm (joining)

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools Phodpfx Aswa Dx Rsh Uea - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: new, axle configuration: > 3 axles, color: red, Year of construction: 2022, Pipe wagon    • Fully available as per request    • Payload from 6 to 25 tons    • Length fully customizable    • Braked or unbraked Condition: New Phedex Anhfspfx Ah Uea Year of manufacture: 2022

Condition: used, Year of construction: 2006, x-travel 3.500 mm y-travel 2.600 mm z-travel 1.000 mm Control HEIDENHAIN iTNC-530 table-size 4.500 x 1.500 mm distance between columns 2.300 mm rapid motion - x-axis 15.000 mm/min rapid traverse Y,Z 12.000 m/min feed 5.000 m/min tool taper ISO 50 number of spindle speeds 5.000 U/min/rpm milling head -swivable UAGA 3.000 U/min 45 Grad spindle drive 22 kW transmission ratio 2 table weight 15.000 Kg Tools changer 30 fach/tools handwheel HEIDENHAIN HR 410 air pressure 6 bar total power requirement 44 kW weight of the machine ca. 25 t - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA Podpfx Ahex Hp Drs Uoha - Direct Output Head. - Automatic Head Changer - Automatic tools changer

Condition: used, Year of construction: 1990, Weinig Profimat 22N Year of manufacture: 1990 Number of spindles: 6 pcs Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm Pedpfx Aex Dbbnoh Usha Infeed table length: 2,000 mm Drive: Cardan shaft Spindle arrangement: Bottom Right Left Top Bottom Universal

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Phsdswqcfdepfx Ah Uja Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: used, knife: Z4 Pedpfxslf I A So Ah Ujha * 220x180x80mm * Strip planer knives * Available: 3, Price per piece: €390.00 + VAT.

Condition: used, For sale: SCM planer machine. Pjdpfex Dr Eqsx Ah Ueha Technical condition: good; visually, the machine requires some refurbishment. Specifications: - 50 cm planing width - 4-knife cutterblock - Electric height adjustment - Tiltable fence - Motor brake not functioning The machine presents well and performs as it should. With a little attention, it will quickly look as good as new again.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Weight 2200 kg Total power requirement 40,3 kw Phodpfxevz Em Hs Ah Uoa

Condition: used, Year of construction: 1981, Weinig U22N Phodpfxsx Da Rbj Ah Uoa Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Top 4 kW Bottom 4 kW

Condition: used, for planing heads max. 125 x 180 x 35 mm. Phedpfolf I Dwex Ah Uea

Condition: used, * 100x30x3 Podpfxelf I Euj Ah Ueha * 5 x 2 pieces in a set.

Condition: used, Available: 2 Price per unit: €220.00 + VAT knife: WP Z36 flight circle (ø): 125 mm drilling: 50 mm Psdpfx Ahjxrdgie Ujha length: 180 mm material: aluminum Labelling: MEC