Used Wood Planing Machine for sale (66,275)

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm Hodpfx Abeyatffegsp - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even Hjdou R Sxxspfx Abgsp voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 Hodszhcizopfx Abgsp x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Hjdpfxezdpcmo Abgsp Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Quick delivery. Hedszhbpaepfx Abgsp

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Hedpsw Tfxdefx Abgsp Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Hsdpfx Asxc Rmqsbgsp Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Hjdpfxsxbh E Ue Abgsp Weight ca. 500 kg

Condition: used, Year of construction: 1992, Working width: 520 mm Planing height: 250 mm Hjdpfeyt E Raex Abgep Cutterhead: strip knives Number of knives: 4 Height adjustment: electric Planing thickness display: scale Feed speed: 2 speeds Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: used, Year of construction: 1977, Working width: 630 mm Planing height: 280 mm Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: electric Indicator for planing thickness: Scale Feed rate: 7 / 14 Infeed roller: Steel Outfeed roller: Steel Table rollers: yes Power consumption: 12 kW Hedpfx Abjln Ud Nogop Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 2000 kg

Condition: used, Year of construction: 2002, Working width: 510 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed speed: continuously variable Hjdpfx Abezhm Disgep Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 900 kg

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Please refer to the attached expert report for details on the condition of the item. Hsdpfx Abjzgc T Dogep

Condition: good (used), Year of construction: 1994, Working width 500 mm Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Hodozfqknepfx Abgep Number of knives 4 St. Feed speed 7/14 m/min. machine weight ab. 1050 kg

Year of construction: 2024, condition: ready for operation (used), A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible. Hodezhb Euspfx Abgsp

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Hodovwgh Repfx Abgjp Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made Hodpfxoy Tkhxe Abgep – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: used, Year of construction: 1962, x-travel 6300 mm y-travel 2200 mm workpiece height 1835 mm Table area 6000x1835 mm Rest 2 Side head 2 number of T-slots 7 T-slot - distance 240 mm Hodpfjyqud Dex Abgop T-slot - width 28 mm bed length 14650 mm column daylight 2075 mm feed 5-60 m/min workpiece weight 15000 kg weight of the machine ca. 55 t dimensions of the machine ca. 14,65x4,37x4,05 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1985, Working width: 180 mm Hsdpfx Aozdzbnebgsp Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight:

Condition: used, Working width: 630 mm Hodozdzaqopfx Abgjp Planer cutterhead: Strip cutter Number of cutters: 4 Feed table length: 2600 mm Feed table adjustment: Handwheel Chip removal indicator: Scale Adjustable angle of the feed fence: yes Motor power: 4 kW Machine length: 2600 mm Machine width: 1000 mm Weight: 880 kg

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Hedozd Hdnepfx Abgop Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Hjdpfszd Hc Rsx Abgep Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Hedpfxezd Hcqs Abgjp Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: used, Surface planer available in 2-sided or 4-sided version Hedpoyid Uyjfx Abgop REX HOMS Working width max. 2050 mm Working height max. 310 mm including swivel ring The 8 images show a REX HOMS 2050 in water blue color; it was refurbished and delivered by jöma several years ago.

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Hodpfsnladhsx Abgjp

Condition: used, Empty weight: 6.000 kg Dimensions (LxBxH): 340 x 210 x 190 cm Price: On request - Documentation available: No - CE certificate present: No - Max. working width: 860 - Transport dimensions: 3400mm x 2100mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfx Ajxbf Iaebgop Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels