Used Lux Turn for sale (8,212)

Condition: used, Year of construction: 2016, Technical details: Tjdpfxozq Aw Ro Am Toa turning diameter: 150 mm

Condition: used, Year of construction: 2016, Technical details: Tedozq Aw Dopfx Am Tja turning diameter: 150 mm

Condition: ready for operation (used), CTX 320 2004 With many tools Hainbuch collet set, 6 Live tools 6000 RPM Bar 68,5mm center distance 600 turning over bed, slide: 400, 300 Travel Z,X 450,210 Turret 12 station 5000RPM Weight 4500kb 3905x1553x1830 Tsdpfxjzqakuj Am Toa Ask for film

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t Tedpox Aq Hwefx Am Toa dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , spindle speed 5,000rpm, 8 station turret, milling speed 5,000rpm, Fanuc OI-TD control, Tedpfjzg Egmjx Am Tja 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, Tjdszg Efispfx Am Tsa +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, Year of construction: 2011, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Todjzpzfwopfx Am Tea Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2010, control FANUC Series 31i-MODEL A weight approx. 9.000 kg rated capacity 75,21 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Todpfx Aszpzfqsm Toa Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2015, control Haidenhein serial number 10981203183 Axis 5 ja x-travel 1.250 mm Tedpfxezpbl Ro Am Toa y-axis 1250 mm z-travel 1000 mm workpiece diameter: 1250 mm Ja not simultaneously

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 22,000 W, total height: 1,840 mm, total width: 1,780 mm, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: 640T Nexus, product length (max.): 2,353 mm, number of axes: 4, This 4-axis Mazak QUICK TURN NEXUS 200 MS was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN NEXUS 200 MS machine we have for sale. Contact us for further details. - Work Area:- Max. Swing Diameter: 675 mm- Max. Swing Diameter over Cross Slide: 276 mm- Max. Turning Diameter: 380 mm- Max. Bar Work Capacity: 65 mm- Main Spindle:- Main Drive Power (30 min rating / 100% continuous): 26 kW / 22 kW (Integrated Spindle Motor)- Max. Torque: 350 Nm- Spindle Nose: A2-6"- Spindle Bore: 76 mm- Chuck Diameter: 210 mm- Second Spindle (Sub-spindle):- Drive Power (30 min rating / 100% continuous): 10 kW / 7.5 kW- Max. Torque: 75 Nm- Speed Range: 35 - 6,000 rpm- Indexing: 0.001°- Chuck Diameter: 169 mm- Tool Turret:- Tool Positions: 12- Tool Mounting Type: VDI-like- Turning Tool Shank Height: 25x25x150 mm- U-Drill Diameter: 20 mm- Boring Bar Shank Diameter: 40 mm- Indexing Time: Approx. 0.2 s (1 step)- Driven Tools (Live Tooling):- Drive Power (10 min rating): 5.5 kW- Speed Range: 25 - 4,500 rpm- Max. Torque: 35 Nm- Travel Ranges & Speeds:- X-Axis Travel: 230 mm- Z-Axis Travel: 575 mm- Rapid Traverse Rate X-Axis: 30 m/min- Rapid Traverse Rate Z-Axis: 33 m/min- Tool Setting / Monitoring:- Automatic Tool Breakage Recognition- Automatic Tool Wear Compensation Adjustment Range: 9,999 mm- Tool Presetter: Tool Eye- Coolant & Pneumatics:- Coolant Tank Capacity: 160 l- Pneumatic Pressure: 5 bar, 100 l/min- Machine Dimensions & Weight:- Connected Load: 46.2 kVA- Operating Voltage: 400 V / 50 Hz- Required Floor Space: 1.740 x 1.780 mm (Base layout space)- Transport Dimensions (QTN 200 M - U 500): 2,353 mm (L) x 1,780 mm (B) x 1,840 mm (H)- Machine Weight: Approx. 4,900 kg - 5,100 kgincluded: LNS QUICK LOAD SERVO 3 (2004)- Type: Automatic Short Bar Loader- Bar Diameter Range: 6 mm to 120 mm- Bar Length Range: 100 mm to 1600 mm Tedpfx Aszqz D Nom Toa Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2001, VICTOR V TURN 36 HYD 3 JAW CHUCK Tjdpszhwufofx Am Tja TAILSTOCK 2 AXIS 750 CENTRES SWARF CONVEYOR YEAR 2001

Year of construction: 2022, operating hours: 8 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, Die bending machine manufactured in 2022. This BLM E-TURN 52B features a Siemens Simotion CNC control system and offers advanced bending capabilities, including fixed radius, variable radius, and multi-radius bending. It is designed for low energy consumption and includes programmable booster and tooling stacks for enhanced performance. If you are looking to get high-quality tube bending capabilities, consider the BLM E-TURN 52B machine we have for sale. Contact us for further details. • Number of axes: 14 • Energy consumption: Low • Bending direction: Right and left bending in-process (automatic direction change) • Bending capability: Fixed radius, variable radius, and multi-radius • Tool configuration: 3 tooling stacks + 3 additional tooling stacks • Tool stack height: 60 mm (2.4") • Tube capacity: • Carbon steel (FE37): max diameter 50.8 mm (2.0"), max wall thickness 1.5 mm (0.06"), based on RM 1.5D, Vy50% • Stainless steel (AISI 304): max diameter 50.8 mm (2.0"), max wall thickness 2.0 mm (0.08"), based on RM 2D, Vy50% • VGP3D software features: • 3D graphical programming • Part feasibility verification with collision detection • Automatic cycle time calculation • Automatic machine cycle generation • Faster quotation preparation and production planning Todpfezqtzgex Am Tea • Standard equipment: • Electrically driven pressure dies • Left and right counter-die supports • Programmable booster / variable-radius unit (booster force 20,000 N; booster speed 1,000 mm/min) • Mandrel bars: 10 mm (0.39"), 16 mm (0.63"), 24 mm (0.94") • CE compliant Additional equipment • WELDET-07: Programmable weld seam positioning system (optical weld seam detection based on color contrast; compatible with ET30, ET35, ET40, ET52) • MC1052-01: Blind hole detection device

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Tsdpfx Amozqzm Ds Tja Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, 1519mm max turning length Renishaw Probing, Tjdpfx Amozilwwe Tsa swarf conveyor, A-Mist air filtration, FSE coolant filtration.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,741 h, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret: VDI 16 disk turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Utilities: Tsdpfx Asympxnom Tea • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A)

Condition: excellent (used), Year of construction: 2004, operating hours: 27,000 h, turning length: 1,070 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,070 mm, workpiece weight (max.): 150 kg, total height: 2,800 mm, total length: 9,000 mm, total width: 5,000 mm, Forkardt chuck, main spindle 250 mm Forkardt chuck, sub spindle 250 mm Chip conveyor Filtration with coolant filtration and paper filtration Tedszl Agzopfx Am Tsa New main spindle bearing installed in 2022, service life 12,000 hours Machine in excellent condition and fully operational Complete set of manuals and documentation Max. turning diameter: 560 mm X-axis: 485 mm Y-axis: 160 mm Z-axis: 1070 mm B-axis: 240° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 37 kW Sub spindle speed: 5000 rpm Sub spindle bore: 65 mm Sub spindle power: 37 kW Tool changer: 80 Spindle speed for driven tools: 12000 rpm B-axis interface: HSK63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Chip conveyor: Yes Tool Eye: Yes Operating hours: 27000 hours Workpiece weight: 150 kg Length: 9000 mm Width: 5000 mm Height: 2800 mm Weight: 14500 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Tedpfx Aozq A Dkjm Tea Swing over cross slide: Ø800 mm Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 used CNC turning machine DMG Gildemeister NEF 600 - Year of manufacture: 2010 Operating hours: approx. 40,600 h - Spindle hours: approx. 17,900 h Refurbished by DMG Mori in 2025: Electronic control unit Control system: Siemens Sinumerik 840D (ERGOline) Max. turning diameter: 600 mm Swinging diameter over slide: 490 mm Turning length: 1,190 mm | Distance between centers: 1,335 mm Bar capacity: 75 mm | Spindle bore: 90 mm Travel X / Z: 398 / 1,250 mm Spindle nose A8 DIN 55026 | Chuck 250 / 315 mm Max. speed: 3,000 rpm Power (100 % / 40 % duty cycle): 27.5 / 39.4 kW Torque S1 / S6: 600 / 845 Nm Tool turret, 12 stations, VDI mounting (static and driven) Tailstock, hydraulic, travel 1,150 mm, max. 1,250 daN, MK 5 Connection: 400 V / 50 Hz / 42 kVA Includes: Chip conveyor Hydraulic 3-jaw power chuck SCHUNK Todpfozfafzjx Am Toa Extensive tool package: numerous VDI holders, static and driven (including boring bar holders, drilling and collet chuck holders), mostly brand Holex, without cabinet Technical documentation (German) Footprint: L x W x H: 3,697 x 2,687 x 1,936 mm | Total weight approx. 7,000 kg Technical data subject to change, prior sale reserved. Used machines and accessories are always sold without warranty!

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM In very good condition. Includes accessories as shown in the pictures. Tjdpfezp Uz Sox Am Tja Transportation can be arranged.

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special Tedpfx Aegvkpfem Tea designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW Tedegvwgcepfx Am Tsa load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: good (used), mileage: 211,080 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,080 mm, first registration: 07/2021, loading space length: 1,800 mm, loading space width: 1,500 mm, loading space height: 450 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 265/65R17, number of seats: 4, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Bluetooth - Electric windows - Electric mirrors - Halogen lamp - None - Manual - Radio/cassette - Seat cover = Notes = Number of axles: 2, Configuration: 4x4, Payload: 1100 kg, Tare weight: 2050 kg, Gross vehicle weight: 3150 kg, Trailer load, unbraked: 750 kg, Trailer load, middle axle, braked: 3500 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 110 kW (148 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Type of transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Rear closure: Tailgate, Central locking, Number of seats: 4, Seat arrangement: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, 4x4 Air conditioning NAP Pickup Euro6 Side bars Tow bar Manual!, Spare wheel, Tread of spare wheel: 8 %, Tire type: All-season tires = Further Information = Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tire size: 265/65R17 Axle 1: Tire tread left: 6 mm; Tire tread right: 5 mm; Brakes: Disc brakes; Suspension: Coil spring suspension Axle 2: Tire tread left: 4 mm; Tire tread right: 5 mm; Brakes: Drum brakes; Suspension: Leaf spring suspension Tsdpfjzk Ddrsx Am Tea Dimensions Dimensions (L x W x H): 540 x 186 x 202 cm Weights Unladen weight: 2,050 kg Payload: 1,100 kg GVW: 3,150 kg Functional Height of loading area: 80 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 306 € per month (delivery van, 72 months); Ask for further information and conditions Identification License plate: VKZ-96-R

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Tedjyki Tajpfx Am Tsa Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: used, Year of construction: 2012, swing diameter 210 mm x-travel 400 mm z-travel 200 mm control FANUC Series 32i Model A weight of the machine ca. ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 + VL 3 Tsdpfjzmiwvsx Am Tsa The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL-3

Condition: used, swing diameter 210 mm Tsdpfx Aozmiwpjm Tja x-travel 400 mm z-travel 200 mm control FANUC Series 18i TB weight of the machine ca. ~ 5.500 kg Vertical Turning Machine | EMAG - VL 3 mLT with driven tools The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL3 | VL3mLT | VL-3