Turning automatic lathe

TORNOS DECO 20s

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 Gjdpfx Akoyrg Ahjhskd • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate being formed • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 Gjdpfx Aez Rw R Dokhjkd • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm Gkjdpew Uczxofx Akhed End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW Gksdpfxjylyh Ds Akhjd - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 Godozkkrvopfx Akhskd - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting Gkedpoz N Hxhofx Akhjd - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Year of manufacture: 2007 Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: Yes - CE marking present: Yes - Serial number: 600007090 - Drive system: Conventional Gkedpfx Aszw A Sujkhod - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] MACHINE HOURS - Number of working hours : 40.236 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Coolant tank * with cooling unit for coolant * with high-pressure pump - Number of turning tool holders : 4 - Number of turning tool holders : 7 - Number of fixed drillers : 4 Gjdpfouhawnjx Akhekd

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM Gkedpezwuu Uofx Akhsd depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 4HEL, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 240 mm, sheet thickness (max.): 28 mm, sheet thickness steel (max.): 28 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 28 mm, overall weight: 11,500 kg, total length: 4,200 mm, total width: 1,950 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine linear guideways Faccin model 4HEL capacity 2100 x 28 mm Used in perfect condition year of make 2006 Plate bending capacity Plate width 2000 mm Rolling thickness 25mm Plate prebend 20 mm smaller bending capacity ID 400 mm Rolls length 2100 mm Upper roll dia 350 mm Pinch roll dia 330 mm Gedpfx Ao Afu Saekhokd Siderolls dia 240 mm Electric motor Kw 18,5 on hydraulic unit Vac 400/50 Weight of the machine 11500 kg Layout mm 4200 x 1950 x H 1650 mm Hardened surface of the 4 rolls of the rolls high strength Driven rollers hydraulic powered with axial gear unit rotation Opening of top roll hydraulic drop-end to unload the plate being formed Variable speed working roll bending rotation hydraulic speed fast/slow up to 7 mtr/min Console electric with centralized commands joysticks and digital readout 3 axis. Digital readouts of the rolls position