Used Magnet for sale (1,972)

Condition: used, This listing is for a Bibby Scientific B212 Magnetic Hotplate Stirrer. Fpedpfx Asxx Aufea Ejd The unit is in full working condition and is ready for immediate release.

Condition: used, This listing is for 1 of 2 Stuart Scientific SM1 Magnetic Stirrer. Fpedpfxexx Auxe Aa Eed The unit is in full working condition and is ready for immediate release. Dimensions: 180 / 280 / 90 Weight: 1.8

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Fedpfx Aasx Npnvo Espd Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: used, This listing is for 1 of 2 Scientific Industries SI-300X MultiMagstir Magnetic Stirrer. Fodpexx Arkofx Aa Eepd The unit is in full working condition and is ready for immediate release. Four Position Multi Mag Stir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility. May be used with up to four 1 L flasks/beakers or three 1 L spinner flasks and a maximum sample weight of 10.0 Kg High and low speed range from 10-1200 rpm including reverse and interval stirring Provides low to high speed stirring and editable memory profiles Low/Medium/High power levels available for various sample viscosity Uses microprocessor control for precise and reproducible operation Manual Mode provides stir, stir reverse, and time functions Profiles Mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps Up to 4 stirring profiles can be saved Automatic Mode recalls and executes one of up to 4 user-defined profiles Stirring Positions 4 Display LCD (2 lines by 16 characters) Wattage 460 w Height (Metric) 48 mm Length (Metric) 375 mm Width (Metric) 325 mm

Condition: used, This listing is for 1 of 5 Stuart SB301 Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Stuart SB301 Magnetic Stirrer is a heavy-duty device designed for mixing solids in liquids. It features a stainless steel plate with a dimensions of 300mm x 300mm, making it suitable for use with vessels up to 30 liters in capacity. Key Specifications Speed range: 100 to 600 rpm Maximum stirring capacity: 30 liters Plate material: Stainless steel Fodpfexx Ar Djx Aa Ejpd Overall dimensions: 328mm x 369mm x 103mm Net weight: 5 kg Electricity supply: 230V, 50Hz, 50W

Condition: used, This listing is for a Heidolph MR 3000 Magnetic Stirrer. Fedpexx Atbjfx Aa Ejpd The unit is in full working condition and is ready for immediate release.

Condition: refurbished (used), Year of construction: 2008, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control Fpedpfxjygnbbe Aa Eod - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Fpjdpfx Asv Dwi Esa Eod

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Fjdpfx Aaetqfhxo Eepd Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Type SD 15 / 35 . Technical data : Length: 350 mm width: 150 mm Polarity ~ 9 mm . Space requirement approx.: L:440 x W:210 x H:135 mm Fedpfx Aasyk Emce Espd . Voltage: 24V Current: 2,04A

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Fpodpfx Asulc Tusa Eod

Condition: used, Year of construction: 1998, functionality: fully functional, 1 pc. Overband Magnet Fodpeyktznefx Aa Ejpd L x W x H = 1.4 x 0.6 x 0.3 m Axle distance A-A = 1350 mm Rubber belts with cleats Drive: Drum motor 1.5 kW 400V/50Hz Permanent magnet L x W x H = 700 x 500 x 140 mm

Condition: refurbished (used), Year of construction: 2004, total width: 15,000 mm, total length: 26,500 mm, Overband magnetic separator new bearings included new motor included Attention old pictures because the magnet is in storage Fpsdpfx Aajra Dvkj Esd inspection possible Available immediately

Condition: used, This listing is for a VWR 620 Standard Magnetic Stirer Fjdpexzhafefx Aa Espd

Condition: used, This listing is for a J.Bibby B212 Hotplate Magnetic Stirrer Fedpoxzgxtjfx Aa Ejpd

Condition: used, This listing is for 1 of 2 Gallenkamp Magnetic stirrer Fpodpfxoxzh D Do Aa Eed

Year of construction: 2017, condition: used, Manufacturer : Eclipse Magnetics Fedpfxsx R D H Aj Aa Eopd Model : Housed Grid ECHD150 Type : Housed Easy Clean Grid Magnetic Separator Year: 2017 Atex : Ex II1/2DcTX + II1/2GIICcTX Input / output : Ø 150 mm Machine dimensions with base: 100 x 90 x 120 cm Machine dimensions without base: 208 x 214 x 270 mm Weight : 40 kg

Condition: ready for operation (used), Wagner Electro Magnetic Conveyor Belt Brand: Wagner 2 pieces on stock: *1x Length frame A-A = 2500 mm, Beltwidth: 1150 mm Driving: 4 kW gearbox Dim. Block : 1150 x 1150 x 600mm Including rectifier. *1x Length frame A-A = 2600 mm, Beltwidth: 1200 mm Driving: 7 kW gearbox Dim. Block : 1700 x 1150 x 600mm Including rectifier. Fpjdpex Dflkjfx Aa Ejd

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Fsdpfxjchuvrs Aa Eopd Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 Fjdpfov U Nwisx Aa Eepd -Clamping surface: Ø 250 mm -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm Total weight: 30 kg

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Fpsdpfx Aoyhy Exja Eed

Year of construction: 2026, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Fsdpfx Aaocqvhxs Eepd Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Location: From stock 54634 Bitburg

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Fjdpfocqvhwsx Aa Eopd Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm -Speedometer -External cooling Fpjdpfsb A Ixpex Aa Ejd -Number: 2x motors available -Price: per piece -Weight: 70 kg/piece

Condition: good (used), Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Permanent Magnet Motor, Servo Motor Fpodpfxsb A Ixqe Aa Eed -Max. speed: 1200 rpm -Drive: 2.6 kW -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 1x motor available Price: per piece -Weight: 64 kg/piece