Used Magnetic Plate for sale (15,768)

Condition: ready for operation (used), Magnetic holder / magnetic base, Magnetic Holder, model E925. Used for mounting measuring tools, dial indicators or other precision instruments. Such bases are typically used in: - mechanical workshops, - metalworking, - machine setup, - precision measurements. Tedpsvkuhljfx Adlof

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Tjdpjxcimisfx Adlef

Condition: used, Year of construction: 1990, Lifting capacity 2,5 t weight of the machine ca. 80 kg Tjdpfxod N Suxo Adljf +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). Tsdpfxotqfhxs Adlof There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm Todpfx Ajtq I Rqedlsf weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: used, Permanent circular magnet Diameter: 220 mm Height approx.: 70 mm Weight approx.: 16 kg Tjdpoxwkchjfx Adljf

Condition: good (used), Type / Model: 500 x 170 Size: 500 x 130 mm Height: 130 mm Accessories/Equipment: Condition: good Weight: 82 kg Tsdpfx Adexvh Aveljf Dimensions: 700 x 200 x 130 mm

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm Tedpeu N Dr Iefx Adljf *

Condition: used, Year of construction: 1990, length 600 mm width 400 mm height 100 mm Tsdpfx Adofgv Ddslsf weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos Tjdpfjxd Upfox Adljf -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

Condition: used, functionality: fully functional, total width: 128 mm, total length: 260 mm, total height: 50 mm, overall weight: 12 kg, Magnetic clamping plate Eclipse Clamping surface: 260 x 128 mm Height: 50 mm Tedpfjxvy Auex Adlef Weight: 11.60 kg

Condition: ready for operation (used), Plate size: 170 x 480 mm plate height: 95 mm changing pole spacing: 12,5/25 mm Todpfx Adjd Ef S Eelef electr. connection: direct current 110 V

Condition: good (used), Manufacturer: TecnoMagnet Type: SQ Tjdpfxjwpucfe Adlsf Year of manufacture: 2000 12 magnetic tables and 1 control unit Electropermanent magnetic clamping system Clamping all kinds of jobs such as: Face milling, lateral drilling, round bar facing and slots drilling Coupled parts machining and forged parts machining Edge milling and chamfering Plates machining at right angle Flattening through drilling and pocket execution Separate MCC control box with quick connection Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (estimate) Length 1000 mm Width 500 mm Height 55 mm Weight 140 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend that you check all important details.

Condition: used, Technical details: weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Tjdou N Dw Djpfx Adljf Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Tsdpfjdz Sqxsx Adljf Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos Tedpov U Nwijfx Adljf -Dimensions: Ø 275 x 115 mm -Total weight: 30 kg

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm Tjdpfx Aju N Dy Sjdlof current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm *

Condition: used, Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm Tedpfx Aoh R D Rdedlsf -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: used, Technical details: weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m Tsdpfxou N Dmxo Adlef PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: good (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC Tjdpev Ui T Rsfx Adlof -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) Todpfx Aeu Nklhjdlof *

Condition: used, Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate Tedpodv Thhsfx Adljf -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg

Condition: used, Year of construction: 1974, Technical details: voltage: 220 V clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate 120 watts Tsdpfx Aeu N D Ntodlof 13x induction loops, width 20mm spacing 43mm *

Condition: used, Technical details: Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Tsdpfx Aeu N D Najdlof Magnetic strips 18x, width 20mm, distance 40mm *

Condition: used, Year of construction: 1973, Technical details: Length: 300 mm width: 275 mm Tsdsu Nvrgepfx Adlef voltage: 220 / 50 V clamping surface area: 300 x 275 mm current: 15 A weight of the machine approx.: 39 kg dimensions L x W x H: 0,47 x 0,28 x 0,09 m Magnetic plate *