Used Magnetic Drill for sale (6,684)

Condition: ready for operation (used), * Brand: Lenoir * Model: electro magnetic conveyor belt * Dim. belt conveyor: A-A = 2700 mm * Beltwidth: 1200 mm. * Driving: 3 kW gearbox Hjdjywm D Rjpfx Acrsl * Dim. block: L= 1800 x W=1200 x H=450 mm * Power block: 10 kW * Incl.: new rectifier.

Condition: ready for operation (used), * Brand: Steinert * Model: electro magnetic drum * Dimension drum: lenght 1300 mm , Ø 500 mm. * Driving: 4 kW gearbox. * Power drum: 3 kW. * Incl.: new rectifier. Hedpfx Acoywm D Dorel

Condition: ready for operation (used), * Brand: Master Magnets Limited * Model: electro magnetic conveyor belt Hsdsywm A Tepfx Acrjl * Length frame: A-A = 2200 mm * Beltwidth: 950 mm. * Driving: 2,2 kW gearbox * Dim. block: L= 1500 x W=800 x H=570 mm * Power block: 2,5 kW * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Goudsmit * Model: permanent magnetic conveyor belt * Length frame: A-A = 2700 mm , Beltwidth: 1100 mm * Driving: gearbox 4 kW Hedpsywmyrjfx Acrsl * Dim. magnetic block: length 2000 mm, width 800 mm, height 300 mm.

Condition: ready for operation (used), * Brand: Goudsmit * Model: electro magnetic conveyor belt * Type: heavy duty. * Dim. belt conveyor: A-A = 3500 mm * Beltwidth: 2000 mm * Driving: gearbox * Dim. block : 2300 x 2000 x 500 mm * Power: 9,8 kW * Incl.: rectifier. Hjdpsywmxnofx Acrel

Condition: ready for operation (used), * Brand: Goudsmit * Model: electro magnetic conveyor belt * Dim. belt conveyor: A-A = 2700 mm * Belt width: 900 mm Hodeywmrhopfx Acrel * Driving: 2.2 kW gearbox * Dim. block: 1700 x 800 x 400mm * Power: 3 kW

Condition: ready for operation (used), * Brand: Goudsmit * Model: permanent magnetic conveyor belt Hsdpfxjywmq Ds Acrel * Length frame: A-A = 1800 mm , beltwidth: 1500 mm. * Dim. magnetic block: 900 x 1500 mm * Driving : 2,2 kW gearbox.

Condition: ready for operation (used), * Brand: LKoreman * Model: permanent magnetic conveyor belt (unused) * Block: L= 1200 x W=850 x H=300 mm Hodpfxsywmhij Acrsl * Length frame: A-A = 1900 mm * Beltwidth: 800 mm * Driving: gear unit 1,5 kW * Speed: 1.6 m/sec

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic conveyor belt (unused) Hsdpsywmctefx Acrsl * Block: L= 835 x W=610 x H=247 mm. * Length frame: A-A = 1500 mm. * Beltwidth: 600 mm. * Driving: Gearbox 1,5 kW.

Condition: ready for operation (used), * Brand: LKoreman * Model: permanent magnetic block (unused) * Type: heavy duty * Dim. block: length 1200mm, width 850mm, height 320mm. * On stock: 2 pieces. Hodpfoywmcgox Acrol

Condition: ready for operation (used), * Brand: Krupp * Model: Electro Magnetic Conveyor Belt * Type: heavy duty Hodpfxjywmarj Acrol * Block: L= 1650 x W=1200 x H=600 mm * Power Block: 7,7 kW * Power Drummotor: 5,5 kW * Beltwidth: 1400 mm, A-A = 3200 mm * Speed: 2,5 m/sec. * Incl.: rectifier (new) * Weight: appr. 7500 kg * On stock: 1 piece.

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: Permanent Magnetic Block (unused) Hjdpfx Aeywmafjcrsl * Dim. Block: length 835 mm, width 610 mm, height 247 mm. * Weight: 580 kg * On stock: 2 pieces.

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. Hjdpfx Acogq Dl Aerjl The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 Hodpfxoy D Nxqo Acrol - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m Hsdpjwlvlaefx Acrel - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 245 mm bore stroke 135 mm spindle taper MT 3 table-size 410 x 380 mm spindle turning speed range 10 - 2.100 U/min voltage 400 V total power requirement 1,1 kW weight of the machine ca. 210 kg Hodpfewlvk Njx Acrel dimensions of the machine ca. 0,7 x 1,8 x 1,75 m - Threading device - Machine vice 150 mm - Drill cassette 9-piece 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW Hodjl Ha Twopfx Acrol voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: good (used), Year of construction: 1997, machine/vehicle number: 21950, Offer 26030 Technical Data: - Drilling capacity in steel ST 60: 28 mm Hjdpfjy D Nipox Acrjl - Maximum drilling diameter in steel ST 60: 32 mm - Thread cutting attachment - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Infinitely variable spindle speeds - Range 1: 65 - 240 rpm - Range 2: 130 - 480 rpm - Range 3: 240 - 875 rpm - Range 4: 800 - 1750 rpm - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Throat: 290 mm - Max. distance table - spindle: 520 mm - Swivel table with 2 T-slots, 450 x 450 mm - Height adjustable via rack with hand crank - Machine vice underneath the swivel table - Emergency stop button - Lighting - Drive: 400 V / 0.9 / 1.3 kW - Required space approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Hsdpfxsx Npnvo Acrjl Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) Hodpfx Acsmftiwsrol ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: excellent (used), Column Drilling Machine Hedpfxoywhu Do Acrjl Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, rotational speed (max.): 2,900 rpm, rotational speed (min.): 110 rpm, For sale is an Alzmetall column drill press in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Alzmetall • Model: AB3-ESV • Speed: approx. 110–2,900 rpm • With tapping function • Quill stroke: approx. 180 mm • Feed rates: 0.1/0.2/0.3 mm/rev • Year of manufacture: 1994 • Weight: approx. 450 kg • Condition: Used, in working order Shipping costs via freight forwarder: approx. €190 Hodpsy Aggiofx Acrjl International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Subject to errors in technical data and prior sale.

Condition: new, Column Drilling Machine Brand: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Max. drilling capacity: 30 mm Standard features: - Stepless feed control Hedpfx Asbrfmkocrol - Stepless speed control - Digital display for speed, feed, and drilling depth - Automatic tool ejector - Operating manual With the following options: - Tapping device

Condition: used, Year of construction: 1980, machine/vehicle number: 21403, functionality: fully functional, power: 4.2 kW (5.71 HP), input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 185 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 700 mm, total length: 1,300 mm, total height: 550 mm, throat depth: 320 mm, table width: 560 mm, table length: 460 mm, overall weight: 1,060 kg, WMW Heckert SABO Standard 40 Column Drilling Machine Including mounted rotary/cross table! Technical Data: Manufacturer: WMW Heckert Model: SABO / Standard 40 Drilling capacity (steel): up to Ø 40 mm Drilling capacity (cast iron): up to Ø 50 mm Spindle taper: MT4 Quill travel: approx. 185 mm Throat (spindle to column): approx. 320 mm Speed range: approx. 63 – 1000 rpm, 9 speeds Feed: approx. 0.10 – 1.6 mm/rev, 9 steps Table size: approx. 560 × 460 mm Vertical table adjustment: approx. 350 mm Table rotation: 360° Max. spindle-to-table distance: approx. 550 mm Max. spindle-to-baseplate distance: approx. 1000 mm Reversible spindle rotation (right/left) Supplied with Albrecht quick-change drill chuck Ø 3 – 13 mm Baseplate size: approx. 440 × 490 mm Column diameter: approx. 220 mm Total motor power: approx. 4.2 kW Machine weight: approx. 1,060 kg Dimensions (L × W × H): approx. 1.3 × 0.7 × 2.5 m Year of manufacture: approx. 1980 (estimated), exact year unknown Condition: Fully functional Heavy-duty industrial build Ideal for precise metalworking and fabrication Transport / Shipping: Due to the weight (approx. 1.06 t), self-collection is preferred. Shipping by freight forwarder can be arranged if all costs are covered by the buyer. Hodpjy H Hn Isfx Acrel Legal Notice: All information provided to the best of our knowledge, but without guarantee; subject to errors and prior sale. Sale is made with exclusion of liability for material defects. This exclusion does not apply to claims for damages arising from gross negligence or intent on the part of the seller, nor for injury to life, limb, or health.

Condition: good (used), Manufacturer: Bulgaria Year of manufacture: 1979 Hsdpsy E Hahefx Acrjl Machine number: 8499 Type / Model: PK 203 Drilling capacity in steel: 25 / 30 mm Spindle taper: MK 3 Speeds: 95 to 2,000 rpm Feed: 0.08 to 0.32 mm/rev Throat: 280 mm Table: 410 x 440 mm Clamping surface: 320 x 345 mm Footprint: 510 x 760 mm Stroke: 160 mm Total connected load: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.5 t Dimensions: 550 x 1,000 x 1,900 mm