Used Magnetic Plate for sale (15,774)

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Todpfxow Hhwwe Adlsf Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Todpfx Adjww H Ntslef Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Tedpoig Hu Nofx Adljf Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Tedpewtc Hgofx Adlsf Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Tjdpfxswnfz No Adlof 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Todpfxewlhfle Adlof Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Tjdpfxewlhd Us Adljf Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Tjdjurv E Djpfx Adljf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Todpfxsxxr H Rj Adlsf Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Tsdpfexwzbzex Adljf Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Todpfxsxvqhhs Adlsf

Condition: used, This listing is for a Promega Maxwell 16 MX3030 Magnetic Particle Processor Automated DNA Extraction from up to 50mg Tissue Purifies up to 16 samples at a time Integrated grinding replaces Proteinase K treatment and manual grinding Purified DNA is ready for downstream amplifications Tsdpoxzhmrefx Adlsf

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Serial number: 1011268 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 220 Todpfx Adew Elvheljf - Bottom roll diameter [mm]: 220 - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, 112777 6700mm x 1070mm x 880mm Surface Table 112778 600mm x 500mm 1800mm Angle Plate 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate Tedpexwl Swofx Adlef 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112788 1830mm x 1220mm x 600mm box table tee slotted on two faces 112789 800mm x 750mm x 1190mm Angle Plate

Condition: ready for operation (used), Zelfstandig opslagsysteem van plaatstaal Type: APL-D 23 palletten Maximale plaatlengte: 3000 mm Maximale breedte van de plaat: 1500 mm Maximale hoogte van de lading: 86 mm Maximaal laadvermogen per pallet: 3 ton Leeggewicht inclusief glijbanen: 11 ton Omron NT 11 25 ampère - 10 kW Afmetingen van de installatie: 3750 (breedte) x 3650 (diepte) x 5580 (hoogte) mm Equivalent: Stopa / Remmert Tsdpfsxp Skwjx Adljf

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, number of rollers: 4, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, total length: 5,950 mm, total width: 2,250 mm, total height: 2,350 mm, power: 38.5 kW (52.35 HP), input voltage: 415 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: cone bending device, hardened rollers, Morgan Rushworth DPBH-4 3100/400 Hydraulic 4 Roll Bending Rolls Model: DPBH – 4 3100/400 Year: 2018 Working length: 3100mm Central Rolls Dia.: 400mm Side Rolls Dia.: 300mm Machine performance on 3100mm full length: Pre Bending With minimum inside dia. of 600mm: 20mm With minimum inside dia. of 2000mm: 25mm Bending With minimum inside dia. of 600mm: 25mm With minimum inside dia. of 2000mm: 20mm Motor power: 38,5 kw Working Speed (double speed): `.5 – 5 m/min Power Supply: 415V-3Ph=50Hz Machine with: Bottom pinching roll with hydraulic positioning Tsdpfx Adsxvyatolof 2 Lateral rolls with double pinch pyramid action Hydraulic drop end Conical Bending Device Dimensions: 5950 x 2250 x 2350mm (L x W x H) Weight: 20,000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 3-roll plate bending machine by Akbend Akyapak Model: ASM-S 200-25/6.0 MJ Capacity: 2500 x 6 mm Top roll: ø 200 mm Year of manufacture: 2011 Tjdpfexy Ag Rex Adljf

Condition: used, This listing is for 1 of 2 Gallenkamp Magnetic stirrer Todpfx Aoxzh D Dodlef

Condition: used, Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No - CE certificate present: No Financial information Todjww Iygopfx Adlef VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° Todpsxabvqsfx Adljf work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate on a solid base frame with inlet/outlet device -Clamping plate: Ø 600 mm -Groove width: 20 mm Tedpfx Adjh It Tyelsf -Accessories: incl. 4 holders -Total dimensions: Ø 685 x 825 mm -Weight: 200 kg

Condition: used, This listing is for a VWR 620 Standard Magnetic Stirer Tjdpsxzhafjfx Adljf

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information Tsdpfx Adoxdigfjlsf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Tsdpfx Adjxaaq Heljf Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate Tsdpfx Adsxzgzbolef