Used Maho Mh 600 T for sale (432)

Condition: used, Year of construction: 1985, For sale: MAHO MH 1000C milling machine Factory number 11429 BKW GmbH model S.05ES Year of manufacture: 1985 Djdpfxszzw Tbe Apmscp 18 bar, Vol. 1.6 m3/h; 3000 1/min; kW 0.36; 50/60 Hz; V 190-240; A 2.85 Net price: 7000 Euro

Condition: used, Year of construction: 2003, DMG DECKEL MAHO DMU 70 eVolution – 5-Axis CNC Universal Milling Machine Manufacturer: DMG / DECKEL MAHO Model: DMU 70 eVolution Year of Manufacture: 2003 Machine Type: CNC Universal Machining Center / 5-Axis Milling Machine Control System: HEIDENHAIN iTNC 530 Condition: Used Technical Data Working Area and Axes Number of Axes: 5 Travel in X-axis: 750 mm Travel in Y-axis: 600 mm Travel in Z-axis: 520 mm Dcodpfxe Ah I A Ue Apmep NC Swivel Rotary Table with B and C axes Table Size: 700 × 500 mm Main Spindle Manufacturer: Kessler Motor Spindle, Year of Manufacture 2022 Installed by DMG MORI Service: March 2023 Spindle Operating Hours since Installation: approx. 2,100 h Maximum Spindle Speed: 18,000 rpm Tool Holder: HSK-A63 Tool Changer Automatic Tool Changer Tool Magazine: 60 positions Control System HEIDENHAIN iTNC 530 Electronic Handwheel Operating Mode 4 Coolant System Through-Spindle Coolant (TSC): 40 bar Coolant Tank: 600 liters Programmable Coolant Nozzles Flush Gun Equipment and Accessories NC Swivel Rotary Table (B/C axis) Automatic 60-position Tool Changer Kessler High-Frequency Motor Spindle Chip Conveyor Oil and Emulsion Mist Separator Infrared Measuring Probe HEIDENHAIN TS 641 Electronic Handwheel Through-Spindle Coolant with 40 bar Programmable Coolant Nozzles Flush Gun Not Included in Scope of Supply: Zero-Point Clamping Plate Vise Condition: Used: See Video and Pictures Positive: In March 2023, a new Kessler motor spindle (year of manufacture 2022) was installed by DMG MORI Service. Since installation, the spindle has only accumulated approximately 2,100 operating hours. RMS Safety System The machine is equipped with a retrofitted MORI SEIKI RMS system (location/relocation safety). Terms of Sale Sale as used Inspection possible by arrangement Dismantling, loading, and transport for an additional charge Sale exclusively to commercial businesses Sale with exclusion of liability for defects, as far as legally permissible Invoice with VAT shown.

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm Dsdpfx Apeuntmdsmscp control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10960000423, For sale is a CNC universal milling machine, type Deckel Maho DMU 60T, manufactured in 1999. This machine stands out due to its robust design (cross slide) and is ideal for toolmaking, prototype production, training, or as a versatile workhorse in the workshop. The machine is in good condition and can be inspected while powered on after prior arrangement. Equipment: Djdpfs Ad Apqjx Apmecp - Rigid T-slot table - Precision vise - Control panel with Heidenhain control Accessories: - Workbench (4 drawers, 1 door) with attached bench vise - Stool - Tool clamping devices Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes and errors!

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Dedpfxeu Idbyo Apmjcp Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dsdpfeygctrsx Apmjcp Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Dcodpjt Hwqwefx Apmsp Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Dedpfx Apo Ah H Txjmocp Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, DECKEL MAHO DMU 60 T – CNC Universal Machining Center – 2001 Manufacturer: DECKEL MAHO Model: DMU 60 T Year of manufacture: 2001 Condition: Used CNC control: HEIDENHAIN Machine type: CNC Universal Machining Center Technical specifications Machine dimensions (L × W × H): 2,900 × 2,200 × 2,900 mm Machine weight: approx. 6,500 kg CNC control: HEIDENHAIN Rotary table Automatic tool changer Enclosed machining area Accessories Tool holders and cutting tools shown in the photographs (inclusion in delivery to be confirmed) Dsdj Acpagspfx Apmscp Rotary table Automatic tool magazine Description Used DECKEL MAHO DMU 60 T CNC universal machining center, manufactured in 2001, equipped with HEIDENHAIN CNC control and a rotary table. The machine is suitable for universal milling, toolmaking, and precision machining applications. The machine is offered with photographic documentation. Further technical details, availability, and scope of delivery can be provided upon request.

Condition: used, Year of construction: 1986, functionality: fully functional, Deckel Maho 800E, manufactured in 1986: Dcodpfoz I Iiqex Apmsp - Table surface area: 600 x 1100 mm - Travel distance in the x-axis: 800 mm - Travel distance in the y-axis: 450 mm - Travel distance in the z-axis: 500 mm - Weight: approx. 4000 kg

Condition: used, Manufacturer: MAHO, Type: MH 700, Serial No. 71249, Travel range X/Y/Z 700 x 450 x 450 mm, Tool holder SK 40, Table size approx. 900 x 400 mm, Control system, Manufacturer: SIPRO, Type: SIAX 121 Dsdoz Tqxgopfx Apmjcp +++ ATTENTION: This machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,000 kg, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, Commissioned in 2013 with RS 3 circular tool magazine (3 pallets) Control system: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Heidenhain infrared probe Blum laser measuring system Dcedpfxo Agnwdo Apmjp 3D Quickset Air cleaner electric handwheel

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Number: 1x servo controllers available -Price: per piece -Dimensions: 320/70/H390 mm -Weight: 7.7 kg Dedpfx Aoq T T I Depmscp

Condition: excellent (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller model: CNC Heidenheim ITNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 18,000 h, number of slots in tool magazine: 94, Equipment: chip conveyor, documentation/manual, Technical specifications Travel ranges: X = 750 mm, Y = 600 mm, Z = 520 mm Speed range: 20–18,000 rpm Tool interface: HSK 63 Tool magazine with 92 tool positions Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar 3D probe Band filter General overhaul in 2021 The following work was carried out during the general overhaul: Replacement of hydraulic lines Replacement of linear guides and ball screws of the X, Y, and Z axes, including associated bearings and timing belts Dedps Ahxzqsfx Apmecp Replacement of scrapers and bellows Work carried out most recently in 2026 Repair of the Z-axis servo motor Replacement of the hydraulic unit for lubrication Replacement of the AC servo controller of the X-axis

Condition: excellent (used), Year of construction: 2001, I have a Deckel Maho DMU 60T machining center for sale. Control system: Heidenhain 430 Technical condition of the machine: Very good Year of manufacture: 2001 Country of origin: Germany Machine parameters: X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 tools (2 x 12 tools) Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Djdo Ahdrvepfx Apmecp Spindle taper: SK40 Complete programming manual Mechanical and electrical documentation Loading is included in the price Stal-Com has been involved in the sale, service, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers throughout Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production at the customer's facility. We cooperate with many companies on a long-term basis, supplying them with additional machine tools.

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate, X/Y/Z-axis: 26/26/20 m/min Number of tool changer positions: 20 Spindle taper: SK 40 Table clamping surface (L x W): 1,000 x 600 mm MACHINE DETAILS Control model: Heidenhain TNC 430 Total power consumption: 26 kW Dcjdpfjzd Aw Dsx Apmjp Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: good (used), Year of construction: 1998, CNC milling machine Deckel Maho DMU 80 T Control system: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate x, y, z: 20-10000 mm/min Rapid traverse rate x, y, z: 15000 mm/min Dcjdpfxez Suqqo Apmsp Work area: x 800 mm, y 650 mm, z 550 mm Tool holder: SK40 DIN 2079 Clamping bolt DIN 69 872 Tool changer: 25 positions Max. tool diameter 160 mm Max. overhang length from the spindle nose 315 mm Work table: Dimensions 1100 x 600 mm T-slots 9 x M14 Permissible weight 500 kg Transport data: Weight 5800 kg Dimensions (length x width x height) 3.05 x 2.40 x 2.45 m

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill stroke: 50 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table length: 360 mm, table width: 800 mm, overall weight: 1,600 kg, table load: 200 kg, year of last overhaul: 2026, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), Dear Sir or Madam, For sale is a universal milling machine of the type Maho MH500M, which particularly stands out due to its extremely simple and comfortable operation. For example, all feed rates can be continuously adjusted via potentiometer. The machine has undergone extensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in order, the gearboxes run quietly, and the levers shift smoothly. Availability: on request X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 350 mm Main spindle speed range: 63 - 4,000 rpm Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table type: Fixed Clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse (X/Y/Z): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Dcedpsrnnf Nsfx Apmop Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work light, electrical documentation, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the machine in your preferred color - Upon request, you can order further accessories such as tools, etc., directly - Upon request, we can install further accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation on site

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 Dcedpfx Apszpxdwomsp T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Djdpfxju T Navs Apmscp Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication Dedpfov Amryjx Apmscp - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: good (used), Year of construction: 1988, CNC universal milling machine, manufactured by MAHO, model MH 500 W, with Heidenhain TNC 232 control system. Equipped with a RÖHM machine vice, jaw width 125 mm. Travel distances: X 500 mm, Y 380 mm, Z 350 mm. Table: 700 mm x 350 mm. Dcodez D T U Depfx Apmop Spindle taper: ISO 40. Spindle speeds: 20 - 4000 rpm, infinitely adjustable. Machine weight: approx. 2000 kg. Machine documentation available. Machine can be demonstrated under power. Very clean machine in good condition.

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank Dcsdpfx Apsxl E Syemjp - operating instructions

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system Dedpfxezung Ej Apmscp >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg Dcedpfxjzibabs Apmop dimension machine approx.LxWxH: 2,3 x 2,0 x 1,850 m The MAHO MH 800 is a high-quality conventional universal tool milling machine designed for precise milling, drilling, and machining operations. It is ideally suited for toolmaking, mechanical engineering, fixture construction, as well as the production of individual components and small production batches. With Heidenhain 3-axis digital readout (DRO) Universal swivelling table Vertical milling head *