Used Maintenance Furnace for sale (7,502)

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Ijdoxurpwopfx Ag Ueth Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Itedpfeim Ik Ssx Ag Ueh Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 400220/659/2017, functionality: fully functional, temperature: 650 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, Warwick dry nitriding furnace, in very good condition, like new. Itedpjy Eg U Eofx Ag Ujh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. Itsdpfsx Tbf Uex Ag Ush CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: good (used), Gebhardt Q2M-P2B6N-PAC RD centrifugal fan 20000 m³/h Gebhardt Q2M-P2B6N-PAC RD Centrifugal fan 20000 m³/h 7,50 kW n max: 1782 t max: 250 p: 1,200 Motor Siemens UD 0705/1082878-016-1 400/690 V 50 Hz 7,5 kW 8,6 kW 60 Hz Itsdsicav Depfx Ag Ush 1160/min Dimensions. Height without motor = 64 cm Height with motor = 95 cm width = 102 cm Depth = 102 cm Weight approx. 280 kg

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Itodpfx Aewxxgaeg Ush Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Itedjxur Ndepfx Ag Ush Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm Itsdpfx Ajcdi R Eog Uoh useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Iedpfx Agsyabxys Ujth Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: ready for operation (used), functionality: fully functional, mileage: 22,348 km, power: 55 kW (74.78 HP), first registration: 04/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 3,979 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as Winter Service Vehicle - From 1st owner = ex-municipal/authority vehicle - Major engine service including timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge before sale - Machine configuration with new drive pedal system - 2,293 working hours - 3,979 total operating hours - 22,348 kilometers - Including Kif front brush type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow) - Including Gmeiner salt spreader type Husky 500V FS, year 2019 (excellent condition/used twice for testing) - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Rear-view camera - Wheelbase 1,600 mm - Track width 1,055 mm - Freshwater tank 180 liters - Unladen weight approx. 1,950 kg - Permissible gross weight 3,500 kg - Dimensions (L x W x H): 4,016 mm x 1,210 mm x 1,970 mm (without attachments) - Driving speed 0–40 km/h - Working speed 0–24 km/h - Noise insulation package - Selectable working speeds 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low emissions Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar - Hydraulic service brake operated via foot pedal - Cab with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg - The spreader is powered and operated by the vehicle’s hydraulic system. - Other uses possible thanks to additional HAKO attachment variants such as sweeping brush, snowplough, and lawnmower (not included) - Subject to errors, changes, and prior sale. Sale is exclusively under our general terms and conditions with exclusion of any warranty. Errors, changes, and prior sale reserved. We are available Monday – Friday from 9:00 to 17:00 without interruption, Saturday by appointment. Outside of these hours, telephone appointments are possible. Iedpfx Asx Dlb Ssg Uoth We are happy to accept your used device/vehicle as part payment. Sales to commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes and prior sale reserved!

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. Itedpfx Aomnp Afjg Uoh * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Ijdpfxoyvix Ie Ag Ueth

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. Isdpfx Agoygk Epe Ujth These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: new, Electrically heated circulating air furnace (horizontal air flow) Itedpfx Asdt R Uueg Ujh max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW Iedpjd Nf Smofx Ag Ueth number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C Isdjdyvkyopfx Ag Usth useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA Iodpfogyn H Nox Ag Usth internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t

Condition: new, type: gas-fired with central recuperator max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA Ijdpfxsg E S Ine Ag Uoth PLC: Siemens S7

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7 Ijdpog Dgymjfx Ag Uoth

Year of construction: 2008, condition: excellent (used), Wachtel Piccolo II Bakery Oven - used - year of manufacture: 2008 - electric - 4 chambers 1.2 x 0.8 m - manual control - steam generators for all chambers - power: 25 kW Itedox Rbpuopfx Ag Ujh - oven on mobile base - without hood - device overhauled - price on request

Condition: good (used), Year of construction: 2000, Matador MD 151 Bakery Oven Iodpsy Alhlefx Ag Ujth - used - year of manufacture approx. 2000 - surface area 15 sqm - manual control - 5 chambers, each 1.8 x 1.6 m - hood with fan - machine from production - requires inspection/overhaul - overall technical condition good - collection from warehouse/shipping possible - price on request

Condition: good (used), Year of construction: 2000, Chamber Oven Miwe Ideal - Model 600/6R - used - year of manufacture: 2000 - area: 6 sqm - manual control - 6 chambers, each 0.6 x 1.6 m - hood with fan - oil or gas burner - oven from production - technical condition: good - price on request Iodpfx Ageyzy Eio Usth

Condition: good (used), Wachtel Infra bakery oven – used – year of manufacture 2008 – surface area 8 sqm – 4 chambers of 1.2 x 1.6 m – manual control – steaming for each chamber – oven from production – good technical condition – collection from warehouse – price on request Itodox Hgxyjpfx Ag Uoh

Condition: excellent (used), Year of construction: 2016, Hein Universal Tube-Type Bakery Oven - Model: EA 2 6060 - Year of manufacture: 2016 - Area: 22 sqm Isdpfjxwwu Dex Ag Uoth - 6 chambers, each 1.8 x 2.0 m - Hood with fan - Semi-automatic device Spider/Hewa - Vacuum cleaner - Computer control - Technical condition: very good - Self-collection from bakery or warehouse - Price on request

Condition: new, Pit furnace, make VEI type: SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz Iedpfx Ajg R Snhjg Ujth temperature: max. 750°C