Used Manual Crimping Machine for sale (73,492)

Condition: excellent (used), Working width 1010 mm Gkodpfx Aswg Ru Eoayob Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2007, Akbend ASM140 Bending Rolls 3 Rolls 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw Gedpfx Aajzxtbvsyekb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Gkjdpowplc Aofx Aayjb Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: good (used), Year of construction: 2001, Punching machine, Boschert EL300 Tooling system: AMADA Up to tool station D, diameter 88.9 mm New tool adapters for stations A/B/C Punching force: 280 kN (28 tons) Punching arm outreach: 350 mm Side stop: 500 mm, right/left Depth stop with digital display Godpfednny Rex Aayekb Side stops: new Total weight: 2300 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52335, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 6,000 kg, controller model: Heidenhain TNC 155, No minimum price – guaranteed sale to the highest bidder! Gkodpfxozz Rmnj Aaysb TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Table load capacity: 6 t MACHINE DETAILS Control system: Heidenhain TNC 155 Apparent power: 45 kVA Phases: 3 Voltage: 380 V Frequency: 50 Hz Current: 85 A EQUIPMENT Manual swivel head, 0.1°

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Gedpfxjzy N Syj Aayskb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Gkodji Ik H Iepfx Aayjb

Condition: used, functionality: fully functional, machine/vehicle number: D40L/8219, Offer Number: D40L/8219 Machinetype: crimping machine Make: WAFIOS Type: K70S Constr. year: wire diameter: 1- 5 mm speed - meter/min: ca. 15 Location: In our warehouse Gsdpfx Aswi Thaeayjkb

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Gkodpfew Upzxsx Aayjb

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request Gkodpfxsfifbbj Aaysb

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Gkodpfxsxz Dqgj Aayob Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, Gsdpfxjzmh Awe Aayekb - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs Gksdpfox Hyhbjx Aaysb • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: good (used), Year of construction: 2019, 400mm swing, 220mm max turning diameter, 510mm cutting length, Siemens 828 Control, Gedpsyyaq Nefx Aayokb 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4500rpm, 3 jaw chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor,

Year of construction: 2026, condition: new, Semi-manual operating Suitable for adhesive labels Gksdpfsfir Ucjx Aaysb Label width: 20-165 mm Label length: 20-200 mm Cylindrical bottle shape only 600 bottle or jars/hourú Dimensions: 530x420x300 mm

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily moved with a pallet truck - Weight approx. 500 kg Gkodpfxjgi Rnws Aayeb Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Gedpfx Aasgculveyskb Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 2005, XYZ Proturn SLX 555-2M CNC/Manual Lathe. S/No. SBLG 00041 (2005) with Proto Trak SLX Control (Control Retrofitted 2019), Chuck Size 310mm Diameter, Gap Bed, Swing Over Bed 660mm Diameter, 2000mm Between Centres, 3 Position QCTP, Spindle Speeds 30 - 1800rpm Gsdpfxjzy N Ine Aayokb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Godpfszu Ni Ujx Aayskb Footprint: 760 x 1,220 mm

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Godszy N Rcopfx Aayekb

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Gkjdpfxsyaywhs Aayjb Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, Gksdpfx Aeq R Tnzsayjb spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2016, Mazak Vertical Centre Smart 530C CNC Vertical Machining Centre with Mazatrol Matrix 2 Control. S/No. 270242 (2016), Table Size 1300mm x 550mm, Spindle Speed Max 12,000rpm, 30 Tool Drum Type ATC Fitted with Various Tool Holders and Renishaw Probe, CAT40 Spindle Taper, LNS Turbo MH500 Swarf Conveyor, Machine Weight 6800kg, User Manual on CD. Country of Origin: United Kingdom Gksdpfozvci Rox Aayeb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Mazak Vertical Centre Smart 530C CNC Vertical Machining Centre with Mazatrol Matrix 2 Control. S/No. 264426 (2015), Table Size 1300mm x 550mm, Spindle Speed Max 12,000rpm, 30 Tool Drum Type ATC Fitted with Various Tool Holders and Renishaw Probe, CAT40 Spindle Taper, LNS Turbo MH500 Swarf Conveyor, Machine Weight 6800kg, User Manual on CD. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gsdjzvckzjpfx Aayjkb

Condition: used, MOZZARELLA STRETCHER APPROXIMATELY 1.5 TONS BRAND: ALMAC MILK PASTRIZER ( 5,000 LITRES PER HOUR ) FULLY AUTOMATIC STEAM VALVE AND AUTOMATIC DIVERT VALVE AND A TINY TAG TO RECORD TEMPERATURES BRAND: REDA DOUBLE VACUUM SEALER AND GAS FLUSH AVAILABLE HAVE INSTALLED A BRAND NEW PUMP BRAND: VIKING DIPPING MACHINE IT IS FOR SHRINK WRAP PRODUCTS AFTER SEALING NEVER USED BRAND: VIKING STEAM MOZZARELLA COOKER ( 40kg PER BATCH ) 120kg PER HOUR APPROXIMATELY 5 YEARS OLD, IN EXCELLENT CONDITION , ALSO COMES WITH PLATFORM BRAND: DIMA CHEESE STICKS MACHINE ( MOULDER ) IT CAN PRODUCE APPROX 30,000 STICKS PER HOUR, IT COMES WITH SIEMENS TOUCH SCREEN, FULLY AUTOMATIC & MANUAL OPTIONS. APPROXIMATELY 5 YEARS OLD ( ONLY USED A COUPLE OF TIMES ) EXCELLENT CONDITION BRAND: MILYLAB MOZZARELLA MOULDER IT CAN PRODUCE APPROXIMATELY 1.5 TONS PER HOUR IT CAN PRODUCE UP TO 10KG BLOCK, BOCCONCINI 25g, MILK CHERRIES 10g, AND Gkodpezc Il Ssfx Aayjb MOZZARELLA BALLS 500g BRAND: ALMAC CHEESE VAT (5000 litres ), BRAND: SORDI THE CHEESE VAT IS 3 YEARS OLD IT INCLUDES SIEMENS TOUCHSCREEN & CURD PUMP; CIP CONNECTIONS AND A WATERPROOF STANDING PLATTFORM IT HAS ON ONE SIDE CUTTING BLADES AND ON THE OTHER SIDE HAS PADDLES PERFECT FOR PRODUCING HARD , MOZZARELLA AND SOFT CHEESES HEAVY DUTY CIP STATION FULL AUTOMATIC OR MANUAL OPTIONS 300 LITRE CLEANING TANK APPROXIMATELY 3 YEARS OLD IN EXCELLENT CONDITION BRAND: SORDI