Used Manual Crimping Machine for sale (71,262)

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system Iiedpfx Asx Hyhbspneb • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time Iedowf Hghopfx Apnjib • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm Iedpjkdnwbsfx Apneib - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Iodpeyr Rcfjfx Apnsib Bending: manually operated Manually adjustable rear stop. Weight: 990 kg

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Ijdpfx Apjv T Uvzenjib Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: good (used), Year of construction: 2006, 2-component silicone system Swivel arm length: 2200 mm Iiedpfx Aeycv Sgopneb Width: 1180 mm Depth: 1000 mm Height: 2450 mm with swivel arm removed Weight with barrel: approx. 450 kg Condition: good, second-hand

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document Iodpfx Ajpgmq Ujpnjib

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Isdpfeymm D Ijx Apnsib Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop Iedpstylguefx Apnsib - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 09102020, Lg. No. 25420 Manually operated 3-roll plate bending machine with asymmetric roll arrangement Technical data: - Max. working width: 1020 mm - Max. material thickness: 1.5 mm - Roll diameter: 64 mm - Top roll crowned, swing-out forward - Rear roll adjustable at an angle via handwheel for conical bending Iiodpfx Apsx Exr Asnob - Lower roll adjustment with lever and eccentric - Front roll parallel - Required space: approx. W 1250 x H 950 x D 750 mm - Weight: approx. 200 kg

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm Isdpfxew Uhams Apnjib - Weight: approx. 1700 kg

Condition: good (used), Year of construction: 2001, Two-component silicone system. Height: 2600 mm. Width: 1300 mm. Depth: 1100 mm. Weight: approx. 450 kg. Condition: good, second-hand Iisdpoxpnvcjfx Apnob

Condition: good (used), The system is open at the top. Blasting height: 1300 mm Width: approx. 1000 mm Iodpfxexu Eyce Apnjib Height: approx. 2150 mm Depth: approx. 1400 mm Weight: approx. 1000 kg

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Iodjuxx Uspfx Apnsib Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Condition: ready for operation (used), Parker 80C080 Hose press press with hose jaws No. 241 Hose sizes: 1/4 " - 2" Power: 3 kW You are welcome to come by for a visit. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Isdpolvrlkofx Apnoib Deviations from technical data as well as errors in the description of the article can happen and remain reserved.

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Isdou Hidkepfx Apnoib Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Iiodpfx Apsxvnwtonsb Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Year of construction: 2006, condition: excellent (used), Manual packing machine Iedpfxsiz S Ifs Apnjib

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm Iiodpfsi Ezq Dex Apnjb 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time. Iijdofibfgepfx Apnob

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 380 kg, Dimensions (W x H x D): 950 x 800 x 1150 mm Weight: 350 kg Operating principle: hydropneumatic Isdpoyl R T Djfx Apnjib Operating pressure: pneumatic, 6 to 8 bar Air consumption: 10 liters per stroke Pressing force: 35 kN at 7 bar Air connection: R 1/4" Punching stroke: 20 mm Return stroke: 100 mm Max. punching height: 120 mm Max. profile height: 120 mm

Condition: new, bending length: 1550sheet thickness: 1.2upper roll diameter: 70 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable Speed of Rotation  We have many references! Iedpfx Aped Ab T Iensib

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel Isdpod Ab Uxefx Apnoib - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- We have many references!

Condition: new, bending length: 1050sheet thickness: 3.3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll Iedpfjd Ab T Aox Apnjib - Body cover EURO 274,-- - Hardened rolls EURO 480,-- - Variable speed of Rotation  We have many references!

Condition: new, bending length: 1250sheet thickness: 2upper roll diameter: 75 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  Iiedpfx Apod Ab T Eeneb - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 465,-- - Variable speed of Rotation  We have many references!