Used Meca for sale (300)

Condition: good (used), Year of construction: 1997, functionality: fully functional, clear span: 19,000 mm, load capacity: 300 kg, For sale is a used Mecalux mezzanine storage system / multi-tier racking installation, consisting of frame racks with two walk-on mezzanine levels, stairs, and peripheral handrails. The system makes optimum use of the hall height and is ideal for carton storage, small parts storage, order picking, or light assembly work. Technical data: • Manufacturer: Mecalux • Year of manufacture: 1997 (per nameplate) • Type: 3-level racking system with 2 mezzanine floors • Footprint: approx. 19.0 m × 7.8 m ≈ 148 m² Levels / Surfaces • Ground floor (rack level): • Base area approx. 19.0 × 7.8 m (≈ 148 m² storage area) • Clear usable height below 1st mezzanine: approx. 3.10 m • 1st upper floor / 1st mezzanine: • Gross area approx. 19.0 × 7.8 m ≈ 148 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 142 m² Kdsdpfx Ajx Dtuasddjg • Clear headroom above: approx. 2.70 m, in areas with braces (approx. 0.50 m) approx. 2.30 m • 2nd upper floor / 2nd mezzanine: • Depth mostly approx. 5.90 m, width approx. 19.0 m • Gross area approx. 112 m² • Less stairwell area (approx. 1.0 × 6.0 m ≈ 6 m²) • → usable area approx. 109 m² ➡️ Total usable area of both mezzanines: approx. 399 m² Stairs & Handrails • 2 × stairs, each • Width approx. 1.0 m • Length approx. 6.0 m • Stable steel steps with anti-slip markings • Handrails on both sides • Continuous handrails on the mezzanine levels • Additional safety by chains at access points Decking & Load Capacity • Mezzanine decking: robust wooden flooring / panel covering • Permissible load per nameplate: 300 kg/m² Lighting • Areas above the mezzanines are equipped with lighting, so the mezzanine levels are already illuminated. Condition • Very well-maintained, lightly used condition • Despite its 1997 year of manufacture, the system appears nearly as new • Mainly just dust on the floors, no visible structural damage to frames, handrails, or stairs • Nameplate present, data legible Location & Handling • Location: 59227 Ahlen • Availability: by arrangement, short-term possible • Viewing: possible by prior appointment Disassembly & Transport • Disassembly by the buyer. • Support with disassembly and loading can be arranged for an extra charge upon agreement. • Transport to be organized by the buyer.

Condition: reconditioned (used), functionality: fully functional, control type: manual, actuation type: hydraulic, working width: 60 mm, stroke length: 105 mm, throat depth: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, back gauge: 345 mm, overall weight: 2,800 kg, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, Press Brake Kedexwukcepfx Addedg Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Distance between uprights: 1020 mm Throat depth: 200 mm

Condition: good (used), functionality: fully functional, operating hours: 12,921 h, Used AMADA press brake Kdedpexwtvdefx Addog Model: HFP220-4S Capacity: 4000 x 220T Number of axes: 8 axes CNC: AMNC, retrofitted by AMADA in 2022 Fast working speed: 100 mm/sec Ram stroke: 200 mm Electrical power: 67 amps, 38.5 kW motor Operating hours: 12,921h Machine tested and inspected by AMADA – report with photo Video on request Machine loaded onto truck

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2019, operating hours: 1,160 h, Please contact Kristoff Van Havere for more information Kodoxx Hy Sspfx Addedg - High dump

Condition: good (used), functionality: fully functional, We offer a set of tools and accessories for press brakes, mainly PROMECAM. Sold as a single lot or in smaller batches. Price on request. Kjdpexvxkqofx Addodg

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg Kdedpfx Ajum R T Sjddjg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: used, Technical specifications: Pressure: 50 t Kjdpfx Adox A Afredjdg Bending length: 2000 mm Equipment: - Back gauge - Emergency stop button - Foot control

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: SP 3933 C70232, Guill Volumetric Filling and Block-Bottom Bagging System, comprising of: Manufacturer - Construcciones Mecanicas Guill S.A. Serial number - SP 3933 C70232. Date of manufacture - 2004. Hopper with sensors. Volumetric filler with cups for 500g, 1kg and 2kg volumes. Guill Bagger - horizontal jaws 300mm wide. Vertical jaws 510mm. With SmartDate 2 coder / ribbon printer. Cutting, second sealing, folding and labelling machine. 1 - pulls air out and folds 2 - cut and seal 3 - bends folds top of pack 4 - fold clamped and sealed 5 - label applied. Electrical control box. Kjdpfxoxcp Rze Addedg Overall dimensions of above 3 machines - 3480mm long x 1700mm wide x 3650mm high. Also supplied with: Outfeed conveyor. Let dimensions - 1550mn long x 250mm wide. Lazy Susan, neoprene top. 1.23m diameter x 800mm operating height. Notes Last production run in June 2025. Used for packing rice, could be ok for salt, sugar. Have change parts for 500g, 1kg and 2kg rice. Was being run at 38-40 packs per minute. Complete with manuals and electrical diagrams. Lots of spare small parts included - belt movers, rollers, etc.

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, Year of construction: 2023, operating hours: 78 h, Equipment: UVV, all wheel drive, cabin, pallet forks, standard shovel, Mecalac AF1200 Front Loader Year of manufacture: 2023 Operating hours: 78 Engine: Deutz Power: 75 hp/55.4 kW Fuel: Diesel 20 km/h machine Gross weight: 7500 kg Dimensions (L x W x H): 6.08 m x 2.10 m x 2.84 m Lift height: 4.60 m Dump height: 2.70 m Rotating beacon Front and rear lighting Trailer hitch Quick coupler Bucket Fork Kdodowhylcjpfx Addsg Mitas EM-01365/70 R1B tires, 90% good

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working height: 1,300 mm, working width: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Kedetv E Hcepfx Addsdg Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Model H1300 Year of Construction 1982 Built in Japan

Condition: used, Year of construction: 2008, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 14600 h Dimensions of machine: length 3300 mm Kdjdpfx Ajtv Rk Rsddog width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3,5x1,8x2,6 m Control AMNC NT All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: excellent (used), Guillotine shears Amada GPX 630 made in France Manufacturer: Amada Type: GPX 630 Kdodsxwmumopfx Addjg Condition: used cutting length max: 3050mm normal steel: 6,35 mm NC backgauge: 1000mm number of hold-downs: 16 housing dimensions: 3750 x 2000 x 1850 mm weight: ~ 6500kg Scope of delivery: guillotine shear Amada GPX 630

Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393 Capacity [Tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF TOP PLATE [mm] 850x550 GUIDING COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. OPENING [mm] 600 STROKE [mm] 420 FREE RUNNING SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER - PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce productivity and reduce energy consumption by up to 80 Kjdpfxjq Ula Ro Addodg during downtime, tool changes and between cycles. cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD light barrier technology - 12" LCD display - Configurable working parameters on PLC. - 50 pre-stored programs available on PLC. - Prefilled valves for fast speeds - Maintenance-free bronze graphite bushes. - Simplified hydraulic unit to reduce maintenance maintenance work.

Condition: used, Year of construction: 2024, operating hours: 61 h, Equipment: all wheel drive, Mecalac Ahlmann AX700 bucket, pallet fork, 61 operating hours, demonstration model, like new, TOP condition Year of manufacture: 2024 - Type: AX 700 - Operating hours: 61 hours - With bucket and pallet fork - 4100 mm high loader - Operating weight: 4,710 kg - Monoboom with Z-bar bucket assembly including precise parallel guidance and bucket position indicator - Mecalac Cat II-Z electro-hydraulic quick coupler - Water-cooled Deutz TD 2.9 L4 turbo diesel engine - Diesel Oxidation Catalyst (DOC) 50 kW / 68 hp - 2300 rpm - Temperature-dependent fan control - Central self-stabilizing articulated joint - Tires 12.5-18 (profile: AT 603) - Travel speed 20 km/h km/h - Sound insulation - Cyclone air filter - 2-stage - 12V electrical system - Battery master switch - Automotive hydrostatic drive - Planetary axles with disc brakes acting on all four wheels - All-wheel drive - 100% engageable differential lock on both axles - Single-circuit hydraulic system with a 62 l/min constant-displacement pump at 250 bar with priority valve for the steering supply - 1st control circuit: lift/lower and float position - 2nd control circuit: tilt/untilt - 1st additional control circuit for quick coupler - Test connection for hydraulic system Performance data Bucket position: - Tilt angle 47º - Max. dump angle at top: 45º Lifting force at ground level: 3500 daN Tear-out force: 3500 daN Thrust force: 3800 daN Tipping load: - Standard bucket, frontal: 3250 kg - Standard bucket, articulated: 2900 kg Equipment payload (level terrain): - On forks, frontal: 2100 kg - On forks, articulated: 1900 kg - Smooth joystick operation with integrated direction and speed control and differential lock actuation - ROPS comfort cab with removable upper section - Tinted windows including skylight - Parallel-guided windshield wiper - Rear window wiper - Windshield washer system, front and rear - Rear window heater - 2 large exterior mirrors - Central multifunction display with display and integrated on-board computer for machine monitoring - Tilt adjustment of the steering column - Multi-adjustable driver's seat - Safety belt Kdodpfx Asxzurzoddeg - Coat hook - Storage compartments - 12V socket - 2 front headlights - 2 roof-mounted work lights - Tow bar Machine dimensions Height: 2470 mm Width: 1600 mm Despite the utmost care, errors in this listing cannot be ruled out. We reserve the right to make errors and to sell the machine prior to purchase.

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 Kdjdpfxjh H Duhs Addog 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used,

Condition: used, Industrial Storage Rack Batch – Approx. 10 km total length – 7 m height Type Heavy-duty industrial storage racking – modular metal frame system Industrial Applications Warehouse storage, logistics centers, food industry, metallurgy, industrial parts and components. Kdedpfx Adsx Eld Esdog Main Technical Specifications: 🔹 Vertical uprights: - Height 700 cm: 1,120 units – width 110 cm - Height 450 cm: 60 units – width 100 cm - Height 570 cm: 3 units – width 100 cm 🔹 Horizontal beams: - Length 360 cm: - 2,564 units (same brand) - 120 units (different brand) - Length 270 cm: 35 units - Length 180 cm: 24 units - Length 170 cm: 4 units 📐 Example full rack module size: 700 cm H x 110 cm W x 360 cm beam length 📦 Total estimated linear length: approx. 10,000 meters 🔩 Assembly type: bolted or clipped (manufacturer not specified) 🧩 Machine Usage Modular high-capacity pallet racking system designed for industrial warehouse use. Supports multiple storage levels and optimizes space and workflow. ⚙️ Features / Differentiators Majority of the lot consists of standardized 7 m high uprights and 3.6 m beams, ideal for large-scale high-rise racking. Additional mixed beam lengths allow for adaptable setups across different warehouse zones or product types. Perfect for full-site warehouse outfitting or expansion.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Kdedpsxwnxtofx Addsg Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Filter 30 m2 Spindle speeds 2850 Kdsdeilug Sspfx Addog

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 Kdjdpfxepygyde Addjg stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Kdedpfx Adsthgidedsg Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Kedpfx Aju A Dgreddsdg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Kdedpfov S U Izjx Addeg Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Kedpfov Rw Rijx Addjdg Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE Kjdpfx Adjwybcyededg description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW