Used Mep Band Saw for sale (133)

Condition: good (used), Year of construction: 2001, Used band saw from MEP Ljdpfjz Spxcjx Ah Sohn Type: Shark 270SC Capacity: 270 x 190 mm Double-sided miter cut capability Automatic lowering/raising and clamping

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: limited functionality, Equipment: lighting, This machine has served us well in our workshop for a long time. Unfortunately, the electronics appear to be defective. Ljdpfx Aoz Dgmmeh Sohn Therefore, we had to purchase a new one. Available for self-collection in Krostitz.

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Ledpfszzkthex Ah Sohn Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: good (used), Year of construction: 1990, Used semi-automatic bandsaw machine from MEP Model: Shark 310 SX Capacity: 310 mm Ljdo Aaz Ikspfx Ah Sshn Two cutting speeds

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the Ledpfx Ahslf Tu Ue Sjhn highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm Lsdpozkbn Ujfx Ah Sshn capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA Ljdpfx Asy Ani Ejh Sshn - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Lhjdpfx Aowigavsh Sen Accessories: 4.5 m roller conveyor, various saw blades

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm Lodpfxjfg E Hys Ah Sehn band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Lhodpfx Ahsfg E H Eo Sen Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 260 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: * semi-automatic * semi-automatic dynamic * manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) * MEP Direct control technology * User interface with intuitive 10" touchscreen display * Mechanical buttons for saw operating functions * Guarantees reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarm and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic, and manual cycles * Miter cuts from 45° right to 60° left - Selectable manual or semi-automatic dynamic cycle * For performing cuts without programming - Protective enclosure for operator safety - Infinitely variable cutting speed regulation from 15 to 100 m/min * Via frequency inverter - Latest-generation hydraulic power unit * High performance with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposed ball bearings * Repeatable 600 mm single stroke for cutting any length - Saw head positioning and feeder movement via joystick - Automatic detection of the initial cut position - Manual band tension monitoring with display readout * Via electronic transducer - Automatic cutting load monitoring * Via a servo valve mounted directly on the cylinder - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = +/- 0.1 mm per feed stroke Manufacturer information – please note: If this saw is installed on a mains circuit equipped with a residual current device (RCD), the RCD must be universal-current sensitive (Type B) and rated at no less than 300 mA. Lsdpfxsz Albie Ah Sshn

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Lodpfetva Nhex Ah Sjhn Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Lsdpfjwwr Tqox Ah Sshn Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, overall weight: 480 kg, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, input voltage: 380 V, 3-phase 400V, 2-speed motor is running smoothly! Lhedpjzawmyofx Ah Son Geared head with 4 speeds. 15, 30, 45, and 90 RPM. Quick clamping mechanism. Brand new, original MEP clamping jaws. Emergency stop. Coolant pump located in the machine base. Mitre cuts are possible. Square cutting capacity: 95x95mm. Maximum saw blade diameter: 350mm. Includes 2 x 350mm saw blades. Made in Italy. Weight: 480 kg. Contact us for shipping options! €2,000.00

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard Lsdpfxofg E Hzj Ah Sohn equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: used, Year of construction: 2023, cutting diameter 450 mm saw band length 6600 x 41 x 1,3 mm table height 800 mm Lhedpfoytx Sqjx Ah Sjn 450 mm 450 mm 450 x 270 mm workpiece weight 15 - 95 m/min 7,5 kW work height max. 3000 kg connected load 3750 x 1400 x 2100 mm NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm Lhjdpfxjxabwhj Ah Ssn capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces . and a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in the network with a residual current device (FI), this should be universally sensitive and not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Lsdpfx Ahexaa S Ro Sshn Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates Lhodpfexaagbox Ah Ssn - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm Ledpsxabpwjfx Ah Sehn capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: reconditioned (used), functionality: fully functional, overall weight: 400 kg, USED SEMI-AUTOMATIC SAW WITH PNEUMATIC VISE, MEP SHARK 280, Lhsdsz H Ixpspfx Ah Son

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. Lodpfjfg E H Ssx Ah Sohn The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Ljdpey Txb Tefx Ah Sjhn

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW Lhodpfoy Hu H Esx Ah Son -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg Lsdexta N Aopfx Ah Sshn - Space requirement: approx. W 1100 x H 1700 x D 1550 mm