Used Messschieber Mahr for sale (48)

Condition: reconditioned (used), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 2,220 mm, type of input current: AC, total width: 1,170 mm, total length: 1,450 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 1,750 kg, input voltage: 230 V, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 300 mm, Equipment: documentation/manual, type plate available, Portal measuring center with a fixed portal and a movable measuring table. Factory overhauled in 2026 (64-bit control, Windows 11 PC, OptiCheck3D 2026 software) including warranty and factory certificate. All axes are based on lapped granite guideways, precise air bearings, and backlash-free ball screws. The base and portal of the machine are made of fine-grained granite. The drive is provided by DC servomotors. The measuring device is equipped with active vibration damping, enabling use in a production environment. 3D multi-sensor measuring device Mahr OMS443 Measuring range: approx. 400x400x300mm Fjdo Ai A Tkepfx Aanegi Dimensions: approx. 1450x1170x2220mm Weight: 1890kg (including separate control unit) Optical sensor (camera & active/measuring laser) Max. load weight: 50kg glass plate, 100kg granite table (available as an option) Measuring accuracy: E1 = 0.5 + L/900 E3 = 1.5 + L/300 Scale resolution: 0.1µm max. Traversing speed: 200mm/s Equipment (can be extended on request): - Renishaw probe system (TP20 or TP200) incl. 1 module Standard Force - Objective lens for camera measurements - PC (Windows 11, 64 Bit) - OptiCheck3D 2026 full version software without subscription Possible services: - Packaging, loading, and shipping (forwarding agent) - Commissioning and calibration - Training

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Fgjdpfxozmr D Eo Aanji The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with a camera, laser, and Renishaw probe system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible). Complete maintenance history available. Factory-reconditioned premium multi-sensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery with factory service or via shipping company, worldwide. Optional online or on-site demonstrations with customer parts, and application-specific consulting by accredited Profitech measuring laboratories during the project planning phase. Complete service: Fjdpfx Aaoxufk Ujnegi – Delivery, setup, commissioning, accuracy acceptance testing according to standards, certification, and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rental, rent-to-own, or financing options available directly through Profitech, without the need for a financial institution. The measuring device can be individually configured to meet customer requirements. Measuring range, all sensors: 400x400x200 mm Dimensions: 850x1000x2000 mm Weight: approx. 800 kg Maximum load weight: glass plate 30 kg Accuracy: U1 = 1.9 + L/200; U2 = 2.4 + L/150; U3 = 2.9 + L/100 (L = measuring length in mm) Maximum travel speed: 250 mm/s Includes camera Includes rotary table Includes laser Includes LED ring light Includes new frame grabber Includes 2-monitor operation Includes CNC control and PC Includes Hexagon Vision3D software

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change. Fgjdjzmtlqspfx Aanji

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation Fgjdpfx Aoxbpgtjanji • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Fedez H Uklepfx Aanegi Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2024, TECHNICAL DETAILS General Information Manufacturer: Mahr Fgsdpfxsz S D Aio Aansi Model: MarSurf XP 20 Professional – Series 1000 Machine Type: CNC surface and contour measuring station Year of Construction: 2024 Condition: used Measuring and Feed System Feed Unit: MarSurf LD 130 Feed Length: 130 mm Standard Measuring Stroke Z: 13 mm Stylus Arm Changer: up to 10 stylus arms CNC Positioning System Positioning System: 4-axis CNC workpiece positioning system Swiveling Axis: ±135° Rotating Axis: ±170° Linear Axis X: 400 mm Linear Axis Y: 400 mm Positioning Accuracy X/Y/Z: approx. ±250 µm Measuring Station and Machine Design Measuring Table: Hard stone measuring table Vibration Isolation: mechanical-pneumatic Measuring Column: CNC measuring column Touchscreen: 17 inches Control Cabinet: present Protective Enclosure: sound-insulated Software and Control Control: LD control Measuring Software: MarWin Professional Contour & Roughness Plus CNC Software: CNC-Plus Q-DAS Interface: QS-STAT Plus Operating System: Windows 10 IoT Enterprise RAM: 32 GB Industrial PC: Dell Dimensions Enclosure Width: 1,450 mm Enclosure Depth: 1,300 mm Enclosure Height: 2,270 mm EQUIPMENT Adapter Plate X/Y/Z Offset Manual Chuck DM28 Signal Tower Stylus Arm Set Additional Stylus Arm Complete technical documentation in digital form Complete technical documentation in paper form

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Fgsdpfx Ajzd R U Doansi Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone.

Condition: refurbished (used), Measuring head Mahr (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, reconditioned. External signs of use are present (light scratches, etc.), but technically the device is in perfect condition and ready for immediate use. Pickup or shipping can be organized at any time. For further questions just contact me. Fsdpfx Ajpl T D Uoanogi

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Sensors: - Optical sensor: Camera & laser (active measurement) - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Fgedpfx Ajxbyxyoanji Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, This 3-axis MAHR Compakt 400 was manufactured in 2001. It features optical and tactile measurement functionality, allowing for precise measurement of rotationally symmetrical components. The machine includes a rotary axis with a Sanyo Denki motor drive, a 6-position probe change rack, and multiple probe configurations. If you are looking to get high-quality measurement capabilities, consider the MAHR Compakt 400 CMM machine we have for sale. Contact us for further details. Fedpfx Aajz E Hz Hjnjgi - Last Known Calibration: 2019- 4th axis: rotary axis- Included Equipment / Scope of Delivery:* 1 Screen / Monitor* Lens with 6x Ring Light* Lens with 10x Ring Light* Calibration plate with setting ring and calibration sphere (probe-to-camera alignment)* Rotary axis (with Sanyo Denki motor drive and 3-jaw chuck unit)* 6-position probe change rack (Renishaw MCR20)- Capabilities & Features:* Optical and tactile measurement functionality* Measurement of rotationally symmetrical components* Multiple probe configurations/geometries supported (straight and star probes)- Documentation: Factory calibration certificates and service reports available

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc. Fgodpfx Ae Ad Simoanei

Condition: used, Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Height-adjustable table Fgsdpfx Aasihpvhsnoi You can find other indicator calibrators in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2025. Fgedpfx Aasdy Uvmenoi Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera including lasers including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Probe system: MFW-250 (measuring range: in z ±0.25 mm) Measuring principle: tactile-inductive Contact forces: 1–3 mN Fjdpfx Ajy D Eadoansgi Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°)

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 3 t measurement range X =: 650 mm measurement range Y =: 1200 mm workpiece weight: 700 kg traversing speed: 200 mm/s capacity: 1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Fodpfx Aaevap Sksnogi Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software *

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) Fgsdpfx Aoxx R Rnoansi - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Hardware & Interface - PC: All-in-one or industrial PC (optional) - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: ready for operation (used), Mahr MarSurf M 400 SD26 Roughness measuring device Measuring device Evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Fodpfx Aaovclcwonogi Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net Calibration standard is not included in the scope of delivery - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 200 mm, type of input current: AC, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished Mahr Multiscope 662 (factory acceptance before delivery) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update für windows 10 (Windows 11 and OptiCheck2025 optionally available) free lifetime software hotline, and user support. Optional delivery with factory service or shipping, worldwide. Fgsdpfxju Dw T Uo Aanei Online or on-site demonstrations available with customer parts, and application consulting by accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training and educational programs also available as online courses. Rental, hire purchase, or financing directly through Profitech without a financial institution. Measuring device customizable to customer needs. Multisensor measuring device equipped with a camera, laser, and Renishaw probing system. Measuring range for all sensors: 600x600x200mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base) Max. load capacity: Glass plate 40kg Accuracy: U1=2.4 + L/150; U2=3.2 + L/125; U3=3.9 + L/100 (L= measuring length in mm) Max. travel speed: 250mm/s Including 2-step zoom camera Including laser Including LED ring light Including Renishaw TP200 probing system Including frame grabber (Eagle) Including Windows 10 Including new Optichek 3D 5.0 evaluation software Including Renishaw TP200 probing system During optional commissioning and calibration, the measuring device can be programmed for customer-specific parts so that you can immediately run your measurement programs even before any required training.

Condition: used, Mahr Perthen Perthometer S4P roughness measuring instrument 1 x Mahr Perthen Perthometer S4P roughness measuring instrument 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50, up to 160 mm Ø More roughness measuring instruments in other sizes – new and used – can be found here. Fedpoihfmuofx Aanogi

Condition: used, Measuring instrument for measuring internal diameters – used bore gauge Fgodpjzux Nksfx Aanei Internal micrometer - tube construction with interchangeable extensions, measuring head with extensions, internal measuring screw set in a case, manufacturer: Mahr. Measuring screw, measuring range for internal dimension 200-225 mm, scale value 1/100, with extensions: 25 mm 50 mm 100 mm 200 mm 400 mm Price negotiable Our asking price is €430 net ex works, plus packaging costs. All technical data is subject to printing errors and changes. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2012, MarSurf M400 MarSurf SD 26 Mahr roughness measuring device with evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. Fgedpoq Nl Ewefx Aanoi You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Fedpfxjw Slafo Aanegi Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: ready for operation (used), MarSurf M300 MarSurf RD 18 Mahr roughness measuring device with evaluation unit The device can only be operated with a cable. Battery operation without function. Bluetooth Measuring principle: stylus method Probe: inductive skid probe Unit of measurement: selectable Measuring range: 350 µm Profile resolution: 8 nm Characteristic values: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical scale automatic/selectable Horizontal scale dependent on cut-off Total distance In according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number n of individual measuring sections acc. to ISO/JIS: selectable 1-5 Scanning speed 0.5 mm/s Probe tip: 2 µm Measuring force: approx. 0.7 mN You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Fjdpfx Aajvcly Njnogi Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures Fgedpfszkl Dysx Aansi From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. W120