Used Mikasa Mtx 70 for sale (35,793)

Condition: good (used), Year of construction: 1964, pressure 7 t Nedoqy Rn Tepfx Ah Uewr weight 0,9 t 1417

Condition: excellent (used), power: 18 kW (24.47 HP), fuel type: diesel, color: other, Year of construction: 2019, operating hours: 247 h, General information Year of manufacture: 2019 Technical information Number of cylinders: 3 Engine capacity: 1.001 cc Steering: skid steer Engine type: Kubota D1005-EF03 Empty weight: 1.268 kg Dimensions (LxBxH): 248 x 110 x 182 cm Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good General Nodpfxex Dytcj Ah Ujwr Country of production: USA Condition CE type: CE

Condition: used, Year of construction: 2014, operating hours: 3,124 h, machine/vehicle number: ZX13513-2227, fuel type: diesel, Weights Empty weight: 20.637 kg Functional Mast: articulated arm Lifting capacity: 272 kg Working height: 4.315 cm Njdpfx Ahjxq Aw Do Uswr Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Outrigger Max. horizontal reach: 2120 m Transport dimensions (LxWxH): 12.9x2.5x3.1 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Nodpfxsx Ap Hpj Ah Ujwr Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, Year of construction: 2018, operating hours: 2,500 h, lifting height: 5,000 mm, free lift: 5,000 mm, fuel type: diesel, power: 55 kW (74.78 HP), motor manufacturer: Diesel, Empty weight: 10.490 kg Lifting capacity: 7.000 kg Rental currency: EUR Production country: FR Nwedpfxex Dg Igj Ah Uer Please contact KEY-TEC Sales for more information

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Nwsdpfx Aox Exmtjh Uor Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Nwsdsxy H E Dopfx Ah Uer -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Condition: like new (used), Condition: As good as new Nodpfx Ahow U Av Ao Ujwr

Condition: used, Year of construction: 2015, operating hours: 10,918 h, lifting height: 7,450 mm, free lift: 2,600 mm, mast type: triplex, fork length: 1,200 mm, fork width: 1,300 mm, total height: 3,500 mm, total length: 2,050 mm, total width: 4,850 mm, color: other, Empty weight: 10.650 kg Lifting capacity: 7.000 kg Nwsdpfx Aexxu Udoh Ujr - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: BSD7541 - Operating hours: 10918 - Lifting capacity: 7000kg - Lifting height: 7450mm - Overhead clearance: 3500mm - Free lift: 2600mm - Fork length: 1200mm - Maximum fork width: 1300mm - Minimum fork width: 400mm - Attachment: Side-shift, Vorkenspreider - Options: Camera, Joystick, Volledige cabine, Vrije-heffing, Werklampen - Mast: Triplex - Driving direction: 2 Road - Transport dimensions: 2050mm x 4850mm x 3500mm (l x w x h) - Transport weight [kg]: 10650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2007, x-travel 750 mm y-travel 600 mm z-travel 520 mm b-axis -10/+95 ° c-axis 360 ° Nwedpfx Aex Dnfgeh Usr control iTNC 530 HEIDENHAIN turning speed range - drive spindle 20 - 10.000 min/-1 drive capacity - spindle motor 9 / 13 kW feed speeds 10.000 mm/min rapid traverse X/Y/Z 24 / 24 / 24 m/min table surface area Ø 800 x 620 mm max. table load 350 kg T-slots 9x 14H7 mm table turning speeds 21,5 min/-1 tool taper SK 40 max. tool weight 6 kg tool change unit 30 Pos. voltage 400 V total power requirement 25 kVA weight of the machine ca. 7,4 t dimensions of the machine ca. 3,60 x 2,50 x 2,80 m coolant tank 1,90 x 0,70 x 0,25 m 3+2-axis CNC machining center DECKEL MAHO DMU 70 - Factory no.: 15435713144 - Machine ON: 44,228 h - Spindle ON: 18,742 h - Control: HEIDENHAIN iTNC 530 - Electric handwheel - Swivel range B-axis 180° - Swivel range C-axis 360°

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l Nsdpfxetvfpco Ah Uowr _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller Nedpfx Ahewqcfde Uewr * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: good (used), price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn Nodpog Uk Eijfx Ah Uswr 3 press frames as gluing star 4 press frames

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data DECKEL MAHO Seebach GmbH 4 Technical Data 4.1 Main Drive 18,000 rpm AC servomotor motor spindle Torque available at the spindle, considering efficiency – see diagram Motor power at 100% duty cycle – see diagram Motor power at 40% duty cycle – see diagram Spindle speed infinitely programmable: 20 to 18,000 rpm Setup mode speed: 20 to 800 rpm Performance diagram 02.273697 18,000 rpm star-delta connection Torque Nm Power kW Njdpfjx N H T Nox Ah Uewr 4.3 Feed Drive AC servomotors for X, Y, Z axes Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min Input increment X/Y/Z: 0.01 mm Rapid traverse X/Y/Z: 50 m/min Setup mode X/Y/Z: 20 to 2,000 mm/min 4.5 Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance X/Y/Z with direct measuring system: 0.010 mm 4.6 Working Area Travel X axis: 750 mm Travel Y axis: 600 mm Travel Z axis: 520 mm 4.7 Main Drive Working spindle: SK HSK Tool holder: steep taper SK 40 DIN 69871 A Tool clamping: hydraulic/mechanical 4.8 Tool Changer with Magazine SK Working spindle: 18,000 rpm Magazine positions: 92 Tool length from spindle nose: 315 mm Max tool weight (automatic change): 6 kg Max total tool weight in magazine: 270 kg Retention studs 4.9 Work Table NC rotary table with swivel axis Clamping surface rotary axis: 500 x 500 mm Centering bore: 50 H6 Max table plate speed: 21.5 rpm Max torque rotary axis: 1,674 Nm Max swivel torque: 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 180 degrees Input/display increment: 0.001 degrees Weight abt. 310 kg Max. table load (centered): 250 kg Max. workpiece diameter: 628 mm Max. workpiece height: 500 mm 4.10 Pallet Changer 2 pallets with pitch hole grid Rotary movement: 180 degrees Longitudinal travel: 350 mm Lift: 75 mm Permissible load (one sided): 250 kg Permissible load (both sides): 500 kg 4.11 Installation Data Electrical supply according to EN 60204-1 Machine connection: TN S system L1 L2 L3 N PE Main connection: 3N PE, 50/60 Hz, 400/230 V Rated current at 100% duty cycle: 82 A Power consumption at 100% duty cycle: 57 kVA Max. pre-fuse: 100 A Pre-transformer Free cable length above floor: 0.8 m Connection cable as per DIN 5710 VDE 0100 Pneumatic Supply Compressed air, condensate-free and dust-free Recommended filter fineness: 50 μm Air volume without blow air: 50 m³/h Additional blow air for tool cooling: 25 m³/h Air pressure: min. 5.5 bar, max. 8 bar Pressure connection (machine side): Bosch 1823 351 01

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Nwodpfx Ajx I Rqvoh Uer

Condition: used, Year of construction: 2019, operating hours: 11,507 h, Type of fuel: LPG Empty weight: 4.090 kg Dimensions (LxBxH): 255 x 125 x 247 cm Lifting capacity: 2.000 kg Lift height: 372 cm Fork dimensions: 1.200 x 1.230 mm Nwjdpfx Ajw E Haueh Usr - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 517385V00023 - Operating hours: 11507 - Lifting capacity: 2000kg - Lifting height: 3720mm - Overhead clearance: 2470mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1230mm - Minimum fork width: 490mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Heating, Work lights, Full cabin - Mast: Duplex - Drive: LPG - Transport dimensions: 2550mm x 1250mm x 2470mm (l x w x h) - Transport weight [kg]: 4090kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, mileage: 139,000 km, power: 129 kW (175.39 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,220 mm, total width: 2,170 mm, total height: 3,050 mm, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, General information Number of doors: 5 Registration number: 25-BSV-7 Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 3.034 kg Nedpox A D N Sofx Ah Uowr Carrying capacity: 3.966 kg GVW: 7.000 kg Max. towing weight: 3.500 kg (unbraked 750 kg) Financial information VAT/margin: VAT qualifying

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm Nsdpfx Ajwnmn Rjh Uowr -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Nwedpjv A Hhhsfx Ah Uer Weight 29 kg Total power requirement 0,25 kw

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Nwedpfxswz Ut Ie Ah Uer Functional Lifting capacity: 250.000 kg Identification Serial number: 088666 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 15.86x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 6,750 h, load capacity: 2,500 kg, lifting height: 4,170 mm, free lift: 160 mm, fuel type: diesel, mast type: telescopic, motor manufacturer: VW, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 40 mm, Equipment: cabin, lighting, sideshift, Forklift Still RX70-25 for sale, year of manufacture: 2014 Lifting capacity: 2500 kg Lifting height: 4170 mm Operating hours: 6750 Fuel: Diesel Nsdsxmhxfopfx Ah Uswr Full cabin Grammer air suspension seat LED work lights Windscreen wiper The forklift can be inspected on site, only the exhaust aftertreatment system is no longer functioning.

Condition: used, Year of construction: 2003, operating hours: 17,048 h, Type of fuel: Diesel Empty weight: 6.081 kg Dimensions (LxBxH): 280 x 140 x 290 cm Lifting capacity: 4.000 kg Lift height: 440 cm Fork length: 1.300 mm - Year: 2003 - Documentation available: Yes Nwodpfjwnix Eox Ah Uor - └ Type Documentation: User manual - CE certificate present: No - Serial number: 517049104002 - Operating hours: 17048 - Lifting capacity: 4000kg - Lifting height: 4400mm - Overhead clearance: 2900mm - Fork length: 1300mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 2800mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 6081kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, mileage: 64,000 km, power: 154 kW (209.38 HP), fuel type: diesel, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,320 mm, loading space width: 2,130 mm, loading space height: 2,080 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, Year of manufacture: 2021 Empty weight: 3.904 kg Carrying capacity: 3.096 kg GVW: 7.000 kg APK (MOT): tested until 02/2026 Cool unit make: Carrier Cargo space outer length: 609 cm Nwodpfx Aox A Av Deh Usr Cargo space outer width: 227 cm MOT approved until 05.02.2026 3.0 L Motor Cool unit brand: Carrier

Condition: excellent (used), Vötsch Type: VTS 7060-5 Halogen Bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1m distance (free-field measurement): < 69 dB(A) Left side port: 50 mm diameter Right side port: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Circuit breaker, customer-provided: 29 A slow-blow Chamber is water-cooled Refrigerants: R-404A and R 23 Weight approx. 675 kg For your safety as the buyer, please note the following information! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legal, compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Njdpfxsxw Uqpe Ah Uowr Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Nedpox Dzftofx Ah Uowr Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.