Used Mikron Haas Vce 500 for sale (186)

Condition: good (used), Year of construction: 1985, Mikron milling machine WF 31 C Year of manufacture: 1985 Lsdpozr Ua Hofx Ah Sjru Equipped with Heidenhain TNC 155 control system In good condition.

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Lsdpfez Ipnnox Ah Sjru Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Ljdpszzknxefx Ah Seru Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Lredpfx Asq Hdwush Sju Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2002, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: TNC 426 M, overall weight: 11,200 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 50, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350-3 Year of manufacture: 2002 Control: HEIDENHAIN TNC 426 M Technical Details X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 700 mm C-axis: 360° A-axis: ° Spindle speed: 15,000 rpm Number of tool positions: 50 Machine weight approx.: 11,200 kg Condition: Used Lrodpo Aa A R Hofx Ah Ssu Technical Features & Accessories: - Compact belt filter system - Chip conveyor - Air filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Ledszkbr Tspfx Ah Soru Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 Lsdpfx Ajy Twa Uoh Sjru ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 05.14, travel distance X-axis: 410 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 50 rpm, total height: 1,560 mm, total width: 1,230 mm, total length: 1,330 mm, table length: 630 mm, rotational speed (max.): 2,240 rpm, rotational speed (min.): 50 rpm, overall weight: 1,000 kg, input voltage: 400 V, Equipment: documentation/manual, Mikron WF 2S – Year of manufacture 1985 Feature | Technical Data Manufacturer | Mikron, Switzerland Type | WF 2S Year of manufacture | 1985 Machine type | Universal tool milling machine X-axis | approx. 420 mm Y-axis | approx. 250 mm Lrsdpsz Ix Drsfx Ah Ssu Z-axis | approx. 335–340 mm Table size | approx. 700 × 250 mm Spindle mount | ISO 40 Spindle speeds | 12 steps Speed range | 50–2,240 rpm Feeds | approx. 8–400 mm/min Rapid traverse | approx. 1,400 mm/min Main motor | 1.2 / 1.8 kW, two-stage Feed motor | approx. 0.55 kW Coolant pump | approx. 0.1 kW Weight | approx. 770 kg with vertical head/tilting table; depending on the configuration, up to approx. 1,000 kg Position indicator | often Heidenhain, depending on the configuration These values are also specified for a WF 2S currently offered from Switzerland, including a travel range of 420 × 250 × 335/340 mm, a speed range of 50–2,240 rpm, and a 1.2/1.8 kW spindle motor. Manuals, electrical diagrams, and programming instructions are available.

Condition: used, Year of construction: 2001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: TNC 426 M, overall weight: 11,200 kg, spindle speed (max.): 15,000 rpm, spindle nose: HSK-A 63, number of slots in tool magazine: 45, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350 Year of manufacture: 2001 Control: HEIDENHAIN TNC 426 M Technical details: X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 900 mm C-axis: 360° A-axis: ° Spindle speed: 15,000 rpm Tool holder: HSK-A 63 Number of tool positions: 45 Machine weight approx.: 11,200 kg Condition: Used Technical features & accessories: - Chip conveyor - Belt filter system Ljdpfj Adfq Dex Ah Ssru - Air filter Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Ljdpfo Aa Aqtex Ah Soru Scrapers on the guideways Steel covers for guideway protection

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER Lodpfx Ahey Tv Nbj Sjru 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Lredpfx Aewww Rhoh Ssu We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 46 Nm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle nose: HSK A 63, number of slots in tool magazine: 170, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Heidenhain iTNC 530 WORKING AREA Longitudinal travel X: 800 mm Transversal travel Y: 600 mm Vertical travel Z: 500 mm B axis: +30° / -100° C axis: n x 360° WORK TABLE Table dimensions: 320 x 320 mm Maximum workpiece weight: 120 kg SPINDLE Spindle taper: HSK A63 Maximum spindle speed: 24.000 rpm Motor power 40% ED: 22 kW Maximum torque 40% ED: 46 Nm AUTOMATION Tool magazine capacity: 170 tools Erowa pallet changer: 7 positions MACHINE EQUIPPED WITH • High-pressure coolant through spindle • Probe • Laser tool presetting • Chip conveyor • Oil mist cooling system • Rotoclear • ITC Intelligent Thermal Control • ITC-5X 5 Axis Intelligent Thermal Control Lrjdey Tam Repfx Ah Seu • APS Advanced Process System • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530 control unit, Working area X 600 x Y 450 x Z 450 mm Spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle Lredpez Hm Dkofx Ah Seu Machine weight 6,100 kg, Connection 16 kW Fuse rating 32 A Operating voltage 400 V, 50/60 Hz

Condition: used, Year of construction: 2002, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 870 mm, torque: 191 Nm, controller manufacturer: Heidenhain, controller model: TNC 426 M, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 46, tool length: 300 mm, tool weight: 8,000 g, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350 Year of manufacture: 2002 Control: Heidenhain TNC 426 M Technical details: X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 870 mm Feed rate (X / Y / Z): 0 – 10,000 mm/min NC rotary table: 1,100 x 1,000 mm Lrsdpsz St Syefx Ah Sou Table load: 1,500 kg T-slots (quantity x width x spacing): 8 x 18 H12, 1 x 18 H7 x 1 mm Spindle speed: 12,000 rpm Drive power – main spindle (100%/40% duty cycle): 20/24 kW Torque: 191 Nm Tool holder: HSK-A63 Number of tool positions: 46 Max. tool diameter: 80/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 200 kg Condition: Used Technical features & accessories: - Cooling unit: MTA TAEEVO015 - Belt filter - Chip conveyor Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Lodpfxs Aaygxe Ah Sjru Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: defective spare-parts repository (used), functionality: not functional, type of input current: three-phase, input voltage: 400 V, CNC universal milling machine Mikron WF 52 C with Heidenhain TNC 425 control (DEFECTIVE) Ledsz A Uiaopfx Ah Sjru The machine is defective and will be sold as is. The screen of the control unit is missing. Type 52C/TNC425, connection 3 x 400 V, 50 Hz, 50 A, 20 kW, control voltage 24 V. Fully enclosed work area with sliding doors, T-slot table, vertical milling spindle, telescopic covers, coolant supply, electronic handwheel on the control panel. Location: Homburg (Saar), Germany. Viewing possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? Lrodstt Acgspfx Ah Sou For further information or contact options...

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle Ledjz Iz I Hjpfx Ah Sjru - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Lrjdpfoyq E I Tsx Ah Sou Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: good (used), Year of construction: 2000, X-axis travel: 710 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle speed: 50 - 10,000 rpm Lrsdpfxoz Stdpj Ah Seu Control system: Heidenhain TNC 430 Table area: 900 x 600 mm Maximum table load: 1,600 kg Machine weight (approx.): 10,000 kg

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231675, A high-performance MIKRON UCP 600 Vario 5-axis universal machining center, manufactured in 2007, is for sale. Technical data Working area Travel in X-axis: approx. 600 mm Travel in Y-axis: approx. 450 mm Travel in Z-axis: approx. 450 mm Number of CNC axes: 5 5-axis machining: yes Rotary/swivel table: NC-controlled Rotary/swivel table Table diameter: approx. Ø 450 mm Max. workpiece/table load: approx. 200 kg B-axis / swivel range: approx. -115° to +30° C-axis / rotary range: 360°* Main spindle Tool interface: HSK-A63 Max. spindle speed: up to approx. 20,000 rpm Spindle hours: approx. 15,015 h Tool changer Automatic tool changer: available Tool interface: HSK-A63 CNC control Control manufacturer: HEIDENHAIN Ljdpez E N T Sefx Ah Ssru Control: iTNC 530 Coolant system Chip conveyor Mains voltage: approx. 400 V / 50 Hz The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Ledpfxjx Hx T Aj Ah Ssru Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Technical Specification Taper Size HSK 63 Lrjdez R A Tdjpfx Ah Seu

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Romarsh, three-phase transformer from CNC machining center Mikron VC500D -Type: 3UR5-0/64 -Power: 10 kVA Lodpfoy Tv Svsx Ah Ssru -Dimensions: 315/215/H275 mm -Weight: 45.5 kg